Is Blue Spark worth?
The Blue Microphones Spark is the best mic you can get for home recording at this price. Use this mic on vocals, instruments, drum overheads, or acoustic guitar to get excellent home recording results.
What microphone is good for acoustic guitar?
Condenser microphones are, arguably, the best possible microphones for recording acoustic guitars as they can be placed close to the sound source. They provide a cardioid polar pattern that rejects background noise and unwanted sound interference.
Does Blue Spark need phantom power?
The Spark also has a fairly low noise figure, at just 10dB A‑weighted, and requires the usual 48V phantom power to operate.
How do you mic an acoustic guitar with vocals?
So where the neck meets the sound hole if you want less body you could angle it a little bit more so it’s pointing at the 12th fret or vice-versa.
Is the Blue Spark SL good for streaming?
The large-diaphragm cardioid condenser capsule and JFET electronics deliver superb detail and rich harmonic audio for the ultimate in professional sound. Upgrade to Blackout Spark SL and hear why Blue is the #1 choice for game streamers, podcasters and musicians worldwide.
What is microphone phantom power?
Phantom Power is a term given to the process of delivering DC (Direct Current) to microphones requiring electric power to drive active circuitry. Condenser microphones such as Shure’s KSM range all have active circuitry and require phantom power.
How do I mic my acoustic guitar?
Start by placing one microphone around the 12th/14th fret and the other at the bridge pointing either at the body or towards the sound hole, 6 – 12 inches away. Adjust each mic so that they sound good on their own. When mixing the guitar sound, often each mic will be panned hard left and hard right.
How do you amplify an acoustic guitar?
Easy Way To Amplify an Acoustic – YouTube
Does Spark SL need phantom power?
Spark SL requires +48V phantom power and works great with audio interfaces, mixers and mic most mic preamps. For best performance and to avoid damage to the microphone’s audio components, we recommend the following procedure:• Set mic preamp gain to its nominal position (“off”).
Should I record guitar and vocals separately?
Recording the guitar part alone, and then overdubbing the vocal, may help create a more professional sound. If you’d like to keep a steady tempo—especially important if you plan to overdub additional instruments—you may want to record to a click track, basically a metronome that you can hear in your headphones.
Is condenser mic good for guitar?
Generally speaking, condenser mics are better for acoustic guitar. And dynamic mics are better for miking electric guitar amps. Condenser mics usually work better on quieter, high-frequency instruments. Dynamic mics work better on louder instruments with more low to mid frequencies.
Can you convert XLR to USB?
It is possible to convert an XLR microphone to USB provided you use an XLR to USB cable adapter. Unlike condenser microphones, dynamic microphones don’t require any DC voltage to function. Therefore, you can successfully connect dynamic microphones directly to your computer by converting the XLR signal to USB.
Does Blue Spark SL come with XLR cable?
This Great Bundle Includes: 1 Blue Microphones Spark Blackout SL Microphone, 1 Pop Filter and 1 15ft XLR Cable. Ready to upgrade your home studio or streaming setup to full broadcast studio level? The Blue Microphones Spark Blackout SL Microphone brings Blue’s legendary studio sound to your space.
Can phantom power damage a guitar?
No, phantom power can’t do damage to your guitar.
What happens if you don’t use phantom power?
It will not hurt anything to leave your phantom power on. Most dynamic or condenser microphones that don’t require phantom power will reject it. Ribbon mics are the exception in this situation. Sending phantom power to a ribbon microphone will probably have disastrous consequences.
Do you need two mics to record acoustic guitar?
While you can always add spaciousness to mono acoustic tracks by utilizing stereo processing, ultimately the only way to capture the sound of an acoustic guitar with depth and accuracy is by using a two-mic setup.
Can you record acoustic guitar with condenser mic?
A condenser microphone, however, will offer greater clarity and is usually the mic of choice for professionals recording acoustic guitar, although more expensive than its dynamic counterpart. You can record acoustic guitar in mono or stereo.
How do you amplify an acoustic guitar with a mic?
Use a short boom stand with a microphone shock mount to position the microphone 6″ to 12″ from the lower F hole. Use a high quality cable to reduce audible hum and buzz. Connect the microphone to a PA system if possible. Use only enough amplification to “lift” the sound of the guitar slightly above its acoustic level.
How can I amplify my guitar without a amp?
Most modern multi-effects pedals have a jack where you can plug in any speakers or headphones. What is this? This means you can play an electric guitar without an amp by using a multi-effects pedal. Simply plug your guitar into a suitable multi-effects pedal and plug headphones or speakers into the pedal.
How can I make my acoustic guitar sound better when recording?
Top Ten Tips for a Great Acoustic Guitar Recording
- Use a condenser microphone.
- Avoid too much bass.
- Be aware of the sweet spot.
- Use New Strings.
- Record Direct.
- First Fret Brilliance.
- Record in Stereo.
- Double-track with different mic techniques.
What type of mic is best for guitar?
Dynamic and ribbon microphones are generally good choices for miking a guitar cabinet. Condenser microphones offer a wide frequency response and low noise characteristics. These mics tend to be super precise and clear.
Can you record acoustic guitar with a condenser mic?
A dynamic microphone is often the cheapest option and will give you acceptable results. A condenser microphone, however, will offer greater clarity and is usually the mic of choice for professionals recording acoustic guitar, although more expensive than its dynamic counterpart.
What does XLR stand for?
External Line Return
The XLR Connector, which stands for External Line Return, is a type of electrical connector found primarily in professional audio, video, and stage lighting equipment.
What can I plug a XLR cable into?
How To Connect an XLR Mic to Computer for Beginners – YouTube
Is the spark SL USB?
Featuring an XLR connector that integrates with USB audio interfaces and mixers, the Blackout Spark SL microphone has a 20 Hz to 20 kHz frequency response, a 100 Hz low-cut filter that increases clarity, and a -20 dB pad, which keeps your audio free of distortion when things get intense.