What do my RPO codes mean?
Usually composed of a combination of three alphanumeric characters (like LS3), an RPO code designates how a vehicle is built during production. As such, an RPO code furnishes the distinct configuration of a particular vehicle as it leaves the factory.
What is the RPO code for 4L60E transmission?
RPO M30
The TH700R4 was renamed “4L60” (RPO MD8) following the new General Motors naming convention when the electronic version, 4L60E (RPO M30), was phased in as the 4L60 was being phased out.
What RPO code is transfer case?
Look for the RPO code on your build sheet,or in your glovebox at the SPID label. If you have RPO code “NP1” you have the NP263 transfer case. If you have RPO code “NP8” you have the NVG246 transfer case.
What is RPO code d07?
And it’s a system that GM uses to identify all the options on their vehicles.
How do you decode a RPO code?
Decoding GM RPO Codes for Your Differential – YouTube
Which RPO code is for rear differential?
GM RPO Codes – Factory Identification Labels and Interpretation
| RPO Code | Description | Ratio |
|---|---|---|
| GT1 | Axle Rear | 2.56 |
| GT2 | Axle Rear | 2.29 |
| GT4 | Axle Rear (Dup of 5X1) | 3.73 |
| GT5 | Axle Rear (Dup of GT8) | 4.10 |
How do I know if I have 4L60 or 4l80?
Appearance. The 4L80E can be told apart from the 4L60E by looking at their transmission fluid pan. This is because the 4L80E has a pan that is oval in shape whereas a rectangular pan is featured by the 4L60E. Another disparity between both devices is the number of bolts used to secure the transmission to the engine.
What year 4L60E are the same?
The key distinction of the Later 4L60-E (1996-2010) from the Early 4L60-E (1992-1997), 4L60 (1990-1992), or 700R4 (1982-1989) is the six-bolt “hex” rear output or tailhousing / adapter pattern. The previous versions featured a four-bolt square bolt pattern at the adapter or tailhousing.
How do I know which transfer case I have?
How to Identify Your Transfer Case – YouTube
What does RPO Z95 mean?
MagneRide magnetorheological damper system
Z95: MagneRide magnetorheological damper system, utilizing magnetically controlled shocks and struts. ZW7: Premium Smooth Ride suspension, using conventional shocks in the front and self-leveling Nivomat shocks in the rear.
Where are Dodge RPO codes located?
Your vehicle’s RPO codes can be found on a sticker in the vehicle’s glove box or compartment.
How do I identify my differential?
Differential Identification using Tags & Stampings
The most accurate differential identification is provided by the bottom line of the tag number or axle tube stamp. Differential tags can easily be used to identify Dana and Ford differentials.
What rear differential do I have?
Stamped Number on the Axle
To figure out exactly what axle you have, you can look for the Dana stamped bill of materials number. This stamped number can usually be found on the righthand side or on the longer axletube on the same side of the tube as the differential cover, facing the rear of the truck.
How much HP can a 4L80E handle?
In short, Performance Automatic yields a 4L80E engineered to handle 700+ horsepower and comparable torque.
Can I swap my 4L60E with a 4L80E?
Upgrading from the 4L60E to the 4L80E is akin to going from a Dana 44 axle to a Dana 60–you’ll add some weight, but also add durability. According to GM Powertrain information, the 4L60E has a maximum engine torque rating of 360 lb-ft and a maximum gearbox torque rating of 610 lb-ft.
Can you make a 4L60E without a computer?
Externally, all it needs is a 12-volt source and an engine-vacuum reference. However, if your trans is, in fact, a 4L60E, running it off a computer is mandatory. On “E” transmissions, the computer controls everything: TCC lockup, gear changes, shift quality and firmness, and line pressure.
How much HP can a 4L60E handle?
Their Stage 2 Pro Race transmission can handle gobs of power while their Invincible Black Edition 4L60E trans can support over 1,000 ponies.
Can I identify my transfer case by VIN number?
How much does it cost to rebuild transfer case?
The average cost for transfer case replacement is between $2,640 and $2,756. Labor costs are estimated between $441 and $556 while parts are priced at $2,199. This range does not include taxes and fees, and does not factor in your specific vehicle or unique location. Related repairs may also be needed.
What is Premium Smooth Ride suspension?
Premium Smooth Ride: indicated by the RPO code ZW7. This suspension uses a conventional suspension in the front, but the rear uses a self-contained, self-leveling Nivomat shock in the rear.
How do you read a RPO code?
What is RPO code Z95?
Z95: MagneRide magnetorheological damper system, utilizing magnetically controlled shocks and struts.
How do you know what rear end you have?
How to Identify Your Differential & Axle Type – YouTube
How can I tell what gear ratio I have without pulling cover?
With the transmission in neutral, rotate the rear driveshaft by hand. Count the number of driveshaft revolutions required for one revolution of the tire. If the driveshaft turns approximately 3-1/2 times, you have a 3.54 ratio, etc.
How do I know what gear ratio my rear differential is?
Count the number of teeth on the pinion gear and count the number of teeth on the ring gear. Divide the ring gear teeth number by the number of teeth on the pinion. The result is your gear ratio.