What is H2S training?
This course is intended for anyone currently working or wanting to work in the Oil & Gas Industry. The goal of H2S Alive is to prepare workers to recognize H2S (hydrogen sulfide) hazards and protect themselves, as well as perform a basic rescue during an H2S incident.
Is H2S training required annually?
Refresher training on H2S safety must be repeated annually for all affected employees.
How long can you work in 10 ppm H2S?
NIOSH: The recommended airborne exposure limit (REL) is 10 ppm, which should not be exceeded during any 10-minute work period.
How long is H2S Alive training?
1-day
Duration. This is a 1-day course.
Who needs H2S training?
oil and gas workers
Training on the subject of Hydrogen Sulfide, or H2S, is essential for all oil and gas workers who could be exposed to H2S during the course of their work activities. This training helps fulfill the training requirements of OSHA 29 CFR 1910 and 1926, ANSI Z390.
When did H2S training start?
1978
What is H2S Alive? This course is the industry standard for hydrogen sulphide (H2S) training in the oil and gas industry, it is intended for all workers in the petroleum industry. It was developed by the Petroleum Industry Training Service in 1978 and is recognized worldwide.
Does H2S Awareness expire?
The H2S Alive® course may be required by employers in the oil and gas industry or other industries where H2S may be encountered. H2S Alive® certificates expire after 3 Years. Students must be 16 years of age.
What is Lel of H2S?
Lower explosive limit (LEL)
4.3%
What is TLV of H2S?
Other Exposure Limits for Hydrogen Sulfide
ACGIH® recommends a threshold limit value (TLV®) of 1 ppm as an 8-hour time weighted average (TWA) and a short-term exposure limit (STEL) of 5 ppm.
What does H2S Alive mean?
H2S Alive is a training session designed to make people aware of the dangers and properties of hydrogen sulfide gas. This instruction is targeted toward people who are working in industries that are more prone to hydrogen sulfide gas or sour gas hazards.
How do I get H2S Alive certificate?
Upon successful completion of the online theory exam with a minimum score of 70%, students will be eligible to complete the skills assessment through an Authorized Training Provider. Successful completion of the skills assessment will result in a Certificate of Completion that is valid for three years.
What is H2S safety?
It is highly flammable and toxic, even at low concentrations. It is heavier than air and may travel along the ground. It can build up in low-lying areas, and in confined spaces (including enclosed, poorly ventilated areas, such as manure pits, sewers, manholes, and underground vaults).
What gas is H2S?
Hydrogen sulfide
Hydrogen sulfide (H₂S) is a colorless gas with a strong odor of rotten eggs. Exposure to hydrogen sulfide may cause irritation to the eyes and respiratory system.
Can I do a H2S course online?
Select your H2S training
Our Online H2S Training is convenient, easy to use, and accepted everywhere! Once you select your course, you will have 24/7 access to it for 180 days.
Can you do H2S free online?
eSafetyFirst is the convenient, hassle-free online training solution for anyone who needs fast H2S Awareness training or re-training. This course isn’t your average, bland workplace safety course that workers quickly forget. Each module is engaging, memorable, and fun!
What is TLV for H2S?
How many ppm is 1 H2S?
Percent to ppm conversion table
| Percent VOL | ppm |
|---|---|
| 0.001% | 10 ppm |
| 0.01% | 100 ppm |
| 0.1% | 1000 ppm |
| 1% | 10000 ppm |
What is IDLH of H2S?
Basis for revised IDLH: The revised IDLH for hydrogen sulfide is 100 ppm based on acute inhalation toxicity data in humans [Henderson and Haggard 1943; Poda 1966; Yant 1930] and animals [Back et al. 1972; MacEwen and Vernot 1972; Tansey et al.
What is TWA and STEL?
A Time Weighted Average (TWA) is a TLV(R) based on a 8-hour workday and a 40-hour workweek. For example the TWA for carbon monoxide is 25 ppm. This means that an average of 25 ppm is considered to be the safe TLV(R) for an 8-hour workday. A Short Term Exposure Limit (STEL) is a TLV(R) based on a 15 minute average.
What is a safe H2S level?
The Occupational Safety and Health Administration (OSHA) defines Permissible Exposure Limits (PELs) to H2S gas as follows: General Industry Ceiling Limit: 20 ppm. General Industry Peak Limit: 50 ppm (up to 10 minutes if no other exposure during shift)
What is a safe level of H2S?
The Occupational Safety and Health Administration (OSHA) defines Permissible Exposure Limits (PELs) to H2S gas as follows: General Industry Ceiling Limit: 20 ppm. General Industry Peak Limit: 50 ppm (up to 10 minutes if no other exposure during shift) Construction 8-hour Limit: 10 ppm.
What are the hazards of H2S?
Hydrogen sulfide (H₂S) is a colorless gas with a strong odor of rotten eggs. Exposure to hydrogen sulfide may cause irritation to the eyes and respiratory system. It can also cause apnea, coma, convulsions; dizziness, headache, weakness, irritability, insomnia; stomach upset, and if liquid: frostbite.
How much does H2S cost?
How much does h2s Alive cost? The cost of this course is 150 dollars plus tax= $157.50 . Candidates receive their credit card receipt by email. They have the option of receiving their written receipt at the class or online.
What is LEL of H2S?