Who is the owner of Carter Lumber?
Neil Sackett –
Neil Sackett – President/CEO – Carter Lumber | LinkedIn.
How many Carter Lumber locations are there?
About Carter Lumber
Carter Lumber, the nation’s 5th largest lumber and building materials supplier, is headquartered in Kent, Ohio. The privately held, family-owned company was founded in 1932 and has 142 locations across 12 states in the Midwest, Mid-Atlantic and the Southeast.
How many employees does Carter Lumber have?
1,210 employees
Based in Ohio, Carter Lumber is a key player in the construction industry with 1,210 employees and an annual revenue of $106.8M. To provide builders and do-it-yourselfers with a broad range of quality building materials and exceptional customer service.
Is Carter Lumber publicly traded?
Common Stock (CRI)
Is timber a lumber?
In the US and Canada, timber is typically used to collectively refer to trees—or the wood of such trees—that have yet to be cut or processed, while lumber typically refers to wood that has been processed as a building material (boards and planks).
When did a 2×4 get smaller?
Size standards, maximum moisture content, and nomenclature were agreed upon only as recently as 1964. The nominal 2×4 thus became the actual 1½ x 3½, imperceptibly, a fraction of an inch at a time. It was a 34 percent reduction in actual volume; as those in the trade would say, it’s “selling air.”
What is a bundle of lumber called?
What Is a Stack of Lumber Called? A unit of lumber is called a package. Another term for a stack of lumber is a charge, which refers to a stack that had been processed in a dry kiln. Otherwise, a stack of lumber is simply called a stack.
Why is it called a 2 by 4?
DIMENSIONAL LUMBER:
In the past, when a timber was called a 2×4 [or “two-by-four”], it actually measured 2 inches by 4 inches. Now, most timber is milled and planed to give it a little more of a finished look, and a little more of a consistent size and profile.
What is a 2×4 slang?
A two by four is a common format for a piece of wood: A length of sawn wood of cross section 2 inches by 4 inches, most often employed as structural framing lumber (dimension or dimensional lumber). “It hit me like a two-by-four” means that you’ve been hit pretty hard.
What is the first cut off a log called?
butt log
What Is the First Cut Off a Log Called? The first log cut above the stump is called a butt log or butt cut. Butt off refers to cutting a piece of a log due to a defect. Most of a tree’s value is in the butt log.
What is a thick piece of wood called?
log. noun. a thick piece of wood cut from a tree.
When did 2×4 stop being 2×4?
Why are wood measurements not accurate?
Maybe you’ve noticed that lumber sizes are often misleading. The “nominal” cross-section dimensions of a piece of lumber, such as 2 X 4 or 1 X 6, are always somewhat larger than the actual, or dressed, dimensions. The reason is that dressed lumber has been surfaced or planed smooth on four sides (called S4S).
What is a 2×4 guy?
Two men, one in a Hawaiian shirt and one holding a plank of wood, chased him into a Starbucks and tackled him to the ground in a citizen’s arrest. They subsequently became known as “Hawaiian shirt guy” and “2×4 guy.” “2×4 guy” has been identified as Jeff Halaby.
What is a 2/4 of beer?
Two-Four
Yes, we buy our beer at the Beer Store in Canada and a box of 24 beers is simply shortened to the words “two four.”
What tree is worth the most money?
The 5 Most Expensive Trees in the World
- Sandalwood– $20,000 per tree.
- African Blackwood– $10,000 per kilogram.
- Agar Wood– $10,000 per kilogram.
- Bocote– $30 per board.
- Pink Ivory– $8 per board.
Why do lumber yards spray water on logs?
The sprinkling of logs (with the equivalent of about 2 inches of rain daily) for several weeks prior to sawing into lumber can prevent fungal damage by preventing the wood from drying out. If there is no oxygen, the fungi cannot become active.
What is the hardest wood in America?
What is the hardest wood in North America? Of locally available woods, Black Ironwood is typically the strongest type of wood you can find in America. It’s found in Florida and has a 3,660 lbf (16,280 N) Janka rating.
What is the cheapest wood to buy?
Pound for pound, the cheapest wood to buy is maple. Poplar, Alder, white oak and beech are also quite inexpensive. Maple, specifically, is one of the most common woods among entry-level woodworkers and general-purpose woodworks because of its affordability and availability.
What do they call a 2×4 in Europe?
If you go to a lumberyard, you buy 48×98 as everything is measured in metric, but in the daily speach most people still use the term 2×4, 2×8 aso. The Inch measurement is in use as long as we speak about size on TV(40″) and cartyres (15″).
What size wood is actually 1 thick?
Hardwood lumber is often sized by the thickness of the board, which is measured in quarters rather than inches. Quarters refer to the number of quarters of an inch of board thickness. For example, a 1” thick board is referred to as 4/4.
What is a 2 by 4 slang?
Two-by-four definition
(slang) Small in size; boxed in or cramped.
What do Canadians call Americans?
What Do Canadians Call Americans? Even though Canada and the United States are both part of North America, Canadians still call residents of the United States “Americans.” They don’t really have a slang term for their neighbors to the south. However, older generations sometimes call U.S. residents “Yankees.”
How do Canadians say sorry?
In other words, where many US speakers will pronounce “sorry” like “sari”, (i.e. in the lot Lexical Set), Canadians make the first syllable like “sore.” In fact, when Canadian actors learn that US speakers say “sorry/sari” in the same manner, they often remark “where’s the pain in that?” For us, “sorry,” the word many …
What trees do Loggers want?
Some of the most recognized hardwoods include maple, oak, ash, beech, sycamore, alder and cherry. Another important factor in product value is tree size. Trees that are taller and larger in diameter will bring higher sale prices because they have more usable volume.