Who makes Torrington bearings?

Who makes Torrington bearings?

the Timken Company

Torrington Bearings
The Torrington Company is a division of the Timken Company. Torrington produces a wide assortment of radial and thrust needle roller bearings as well as bearings assemblies for particular applications.

How do you read a bearing part number?

The first digit indicates the width or height series (dimensions B, T or H). The second digit identifies the diameter series (dimension D). The last two digits of the basic designation identify the size code of the bearing bore. The size code multiplied by 5 gives the bore diameter (d) in mm.

How do you match bearings?

Select a bearing that matches the dimensions of the shaft or housing from the bearing boundary dimensions table. Check that the type of bearing you have selected is appropriate by using the “Performance comparison of bearing type” with the bearing usage criteria.

What does NTN mean in bearings?

Part number system

Did Timken buy Torrington?

The Timken Company today completed its acquisition of The Torrington Company that it announced last October 16. Timken acquired Torrington from Ingersoll-Rand for $840 million — $700 million in cash and Timken shares valued at $140 million.

What happened to The Torrington Company?

In 1968 the management sold the company to Ingersoll Rand. It was later purchased in 2003 by the Timken Company. The Timken company utilized its Heavy Bearing plants and later Needle Bearing plants along with Torrington brand name was sold to JTEKT in 2009.

Are bearing part numbers universal?

Developed in 1917 as an industry trade group by a committee of the world’s leading bearing manufacturers, the American Bearing Manufacturers Association (ABMA) developed a standard numbering code as a universal identifier of bearing size and attributes.

What do bearing numbers indicate?

A bearing number is composed of a basic number and a supplementary code, denoting bearing specifications including bearing type, boundary dimensions, running accuracy, and internal clearance.

How is bearing size measured?

This can be measured in the same way as the outer diameter. Simply place the jaws of your vernier caliper around the width of the outer ring of the bearing and close it until it meets the ring. Again, it should feel snug but not tight. The value which is displayed on the caliper is the width of the bearing.

Are spacers necessary for bearings?

Bearing spacers are totally optional; longboarders and casual skaters likely won’t put enough pressure on their boards to ever need them, though they are definitely a good investment if you want to slide, do a lot of tricks, and generally skate hard.

What does LLB mean on a bearing?

better for hubs
On most other bearings 2RS means that the seal is made from rubber and has one sealing lip rubbing on any flat part of the inner race. Enduro’s seals are usually either LLU (usually the MAX type bearings) or LLB (better for hubs).

What does UC mean in bearings?

The SKF insert bearing units – UC range achieves this and more.

When did Timken buy Torrington?

February 2003
A leading global manufacturer of highly engineered needle roller bearings for automotive and mobile applications, the Needle Roller Bearings business was originally formed in 1912, and acquired by Timken through its acquisition of The Torrington Company in February 2003.

What is a Torrington bearing?

Torrington Needle Roller Bearings– Torrington needle roller bearings are a special type of roller bearing that uses long, thin cylindrical rollers that look like needles. They are used to reduce the friction of a rotating surface.

Did Koyo buy Torrington?

Koyo bought the Torrington needle bearing division from Timken in 2011, which acquired Torrington in 2003.

What size is a 6203 bearing?

Dimensions

What does DD mean on a bearing?

Other suffixes from various brands

How do you find the bearing number from OD and ID?

Measuring your bearing: Most bearings are measured in three ways, the inside diameter or (ID), the outside diameter or (OD) and the width or (W). It is important to note that our bearing measurements are all done in the following order: Inside diameter (ID) x Outside diameter (OD) x Width (W).

What are the three rules of bearings?

There are 3 rules to follow when measuring a bearing: Always measure the angle in a clockwise direction.
…
To find a bearing from a given angle, use the following angle facts:

• Co-interior ‘c’ angles add to 180°.
• Alternate ‘z’ angles are equal.
• Angles on a straight line add to 180°.
• Angles in a full turn add to 360°.

Which side of the bearing faces out?

Correct Installation/ Orientation of a Press in Wheel Bearing – YouTube

Do pros use bearing spacers?

What is difference between LLU and LLB bearings?

For our purposes, LLU is a full contact seal system, while LLB is non-contact. Some hubs (White Industries is one) come with “2RS” seals, which literally means 2 Rubber Seals.

What does LH mean on a bearing?

Non-contact rubber seal. LU, LLU: Double-lip contact rubber seal. LH,LLH: Light contact rubber seal.

What does P4 mean in bearings?

Comparing ANSI, DIN & ISO Bearing Standards

Does Timken own Torrington?