Who manufactures HDPE pipe?
WL Plastics
WL Plastics is the premiere North American manufacturer of high performance, high density polyethylene pipe for the energy, industrial, and municipal water markets. Used since the 1970s, HDPE pipe is the fastest growing material used for transporting drinking water due to its tough, resilient properties.
What are the sizes of HDPE pipe?
The standard length of HDPE pipe is 50 feet, in sizes above 2” in diameter with longer lengths available on request. Coiled pipe is available in diameters up to 3” and is available in 250 and 500 foot lengths. Larger pipe sizes and coil lengths are available on special request.
What is PN 4 in HDPE pipe?
The PN abbreviation used after the size of the polyethylene pipe represents the maximum pressure that the pipe can withstand; just like PN 16 PE100 DN63 that is a HDPE Pipe made of PE100 material and 63 mm in diameter, and should withstand a pressure of 16 bar.
What is the difference between PE and HDPE pipe?
The Difference Between HDPE and PE Pipes
HDPE is a type of PE pipe. However, HDPE pipes are more durable than other PE pipes because they come with high melting and impact points. HDPE pipe is tough, resistant to chemicals, resistant to corrosion, and light in weight.
What is the largest HDPE pipe?
The AGRU XXL PIPE PRODUCTION FACILITY allows the extrusion of the world’s largest high-density polyethylene pressure pipe. AGRU extrudes solid-walled pipe strings made from high-density polyethylene in continuous lengths and outside diameter of up to 610 m (2,000 feet) and 3.500 mm (138 inches), respectively.
Who owns ISCO Industries?
JIMMY KIRCHDORFER, JR.
JIMMY KIRCHDORFER, JR.
Mr. James Kirchdorfer, Jr. (Jimmy) is the chairman and chief executive officer (CEO) of ISCO Industries. Prior to becoming CEO, he also served as president for 10 years (2000-2010) and general manager from 1995-2000.
What is PE 100 in HDPE pipe?
PE100 is the third generation of pipe grade PE.
It has an optimum balance of three key properties: Minimum Required Strength (MRS) – this provides long-term strength and creep resistance. Stress crack resistance (sometimes referred to as slow crack growth resistance). Rapid crack propagation resistance.
How many types of HDPE pipe are there?
Types of HDPE Pipes
PE 63 – medium pressure piping systems. PE 80 – gas pipe for natural gas distribution network with pressure rate up to 4 bars or drinking water pipe with pressure rate up to 16 bar – sewers, outfall pipes, industrial pipes. PE 100 – high demands piping applications.
What is PN16 pressure rating?
Nominal pressure 16 bar; maximum internal allowable pressure (in bar) of a mechanical component, considering a temperature of 20 °C.
Is HDPE expensive?
In 2020, the average global price of high-density polyethylene (HDPE) stood at 837 U.S. dollars per metric ton. As of May 2022, the price of HDPE reached 1,216 U.S. dollars per metric ton.
What does Dr mean in HDPE pipe?
Dimension Ratio
Dimension Ratio (DR): The Dimension Ratio (DR) is the ratio of the pipe outside diameter to the pipe minimum wall thickness. As diameters change, the pressure rating remains the same for the same material, dimension ratio and application.
What is DN in HDPE pipe?
DSD Polyethylene Outside Diameter (OD) conversion to Nominal Diameter (DN) PE pipe size is defined by its outside diameter (DN/OD for pipes and dn for fittings), whereas Ductile Iron and other pressure wastewater pipe materials are defined by their nominal Bore (DN).
Can you drill and tap HDPE pipe?
No. Tapped threads are not recommended for use on HDPE piping products.
Who is Jimmy kirchdorfer?
James Kirchdorfer, Jr. (Jimmy) is the chairman and chief executive officer (CEO) of ISCO Industries, Inc. Prior to becoming CEO, he served as president for 10 years (2000-2010) and general manager from 1995-2000. Jimmy began his career at ISCO in the early 90s, working summers during college.
What is difference between PE 80 and PE 100?
PE100 offers additional long term strength and performance over PE80 while allowing for thinner pipe walls for the same operating pressure. PE100 uses less polymer and provides for a larger bore and increased flow capacity.
What is difference between PE 63 and PE80?
PE 63 – medium pressure piping systems – irrigation system – drinking water connections. PE 80 – gas pipe for natural gas distribution network with pressure rate up to 4 bars – drinking water pipe with pressure rate up to 16 bar – sewers, outfall pipes, industrial pipes.
What does PE mean in HDPE pipe?
Polyethylene pipe
Polyethylene pipe (PE & HDPE) : Properties and Types of PE100 pipe.
Which is better PVC or HDPE?
Durability. PVC is a durable vinyl polymer whereas HDPE is a polyethylene thermoplastic made from petroleum. Both pipes are strong through high temperatures. When comparing failure ratings when exposed to events like rain, stress, wind, heat or cold, HDPE is proven to be more durable.
What is DN and PN?
Nominal diameter (DN) and nominal pressure (PN)
What is PN means in pipe?
Notes: PN Is the nominal working pressure rating. The number used to describe PN is 10 times the value of the maximum allowable operating pressure (MAOP) at 20°C (MPa x10) based on a design factor of 1.25. SDR Nominal ratio of outside diameter to wall thickness.
What is stronger than HDPE?
HDPE is easy to fabricate and weld using thermoplastic welding equipment. It is an excellent choice for fabricated water tanks and chemical tanks. UHMW (ultra high molecular weight polyethylene) is an extremely tough, abrasion-resistant, low-cost plastic, used for a wide range of wear applications.
Is HDPE stronger than steel?
Simply put, steel is stronger than HDPE in almost every way. The one advantage of working with HDPE is that it is a bit softer than steel, making it less likely to mar parts during a wash cycle.
Which is stronger SDR 26 or SDR 35?
SDR 26 and SDR 35 both categorize under the SDR rating system for pipe. At 5% deflection, the SDR 26 pipe can undergo pressurization of 115psi vs the SDR 35 pipe’s rating of 46psi. Despite that, neither pipe is pressure rated as applications should be restricted to drainage.
Which is thicker SDR11 or SDR 17?
Wall Thickness
The strength of SDR 11 is higher than SDR 17.
What is PN rating?
PN Is the nominal working pressure rating. The number used to describe PN is 10 times the value of the maximum allowable operating pressure (MAOP) at 20°C (MPa x10) based on a design factor of 1.25. SDR Nominal ratio of outside diameter to wall thickness.