Are 10mm and 3/8 the same?
10mm = just over 3/8 inch. 11mm = almost 7/16 inch.
What can I use instead of a 10 mm wrench?
What to Use if You Don’t Have a Wrench
- Duck tape. Duct tape is useful in almost any situation but you may be surprised to learn that you can use it to loosen bolts.
- Two coins. Who would think that money can be used as a makeshift tool?
- Zip-tie.
- Another nut and bolt.
What is 3/8 as a decimal?
0.375
3/8 as a decimal is 0.375.
Is M10 the same as 10mm?
Steel bolt with M10 metric thread. Metric threads are designated with a capital M plus an indication to their nominal outer diameter and their pitch: This bolt is M10 x 1.5 – which means the outside diameter is 10mm and the threads are 1.5mm apart (the most common thread pitch for M10).
What size wrench fits a 10mm bolt?
| Metric Fasteners – Wrench size needed for Driving common Nuts | ||
|---|---|---|
| Screw Size | Wrench Size * | Alt Size, Acorn *** |
| M5 | 8mm | 8mm |
| M6 | 10mm | 10mm |
| M8 | 13mm | 13mm |
What size is 10mm in standard?
Orders may still be placed for processing when we re-open for business on the 27th of September.
| MM | Approximate Size In Inches | Exact Size In Inches |
|---|---|---|
| 10mm | Little over 3/8 Inch | 0.39370 Inches |
| 11mm | 7/16 Inch | 0.43307 Inches |
| 12mm | Just short of 1/2 Inch | 0.47244 Inches |
| 13mm | Little over 1/2 Inch | 0.51181 Inches |
What is 3/16 in a decimal?
0.1875
Hence the decimal form of the given fraction is 0.1875.
What is 3/5 as a decimal?
0.6
Answer: 3/5 as a decimal is 0.6.
What size socket fits an M10 bolt?
Resources
| WRENCH OR SOCKET SIZE ACROSS FLATS | HEX NUTS STYLE 1 | HEAVY HEX NUTS |
|---|---|---|
| 15.00 | M10 x 1.5 | |
| 16.00 | M10 x 1.5 | |
| 18.00 | M12 x 1.75 | |
| 21.00 | M14 x 2 | M12 x 1.75 |
What is M10 in mm?
Standard metric spanner and allen key sizes.
| Size | Spanner | Allen Key |
|---|---|---|
| M8 | 13 mm | 6 mm |
| M10 | 17 mm | 8 mm |
| M12 | 19 mm | 10 mm |
| M16 | 24 mm | 14 mm |
Is 13/32 The same as 10mm?
To convert 13/32 inch to mm, divide 13 by 32 to convert the fraction to a decimal.
…
SAE to Metric Conversion Chart.
| Standard (SAE) | Metric (mm) | Inches (decimal) |
|---|---|---|
| 9 mm | 0.354″ | |
| 3/8″ | 9.525 mm | 0.375″ |
| 10 mm | 0.394″ | |
| 13/32″ | 10.3188 mm | 0.406″ |
What size nut takes a 10mm socket?
What is the equivalent metric unit of 10 mm?
Linear Measure
| 10 millimeters (mm) = | 1 centimeter (cm) | |
|---|---|---|
| 10 centimeters = | 1 decimeter (dm) | = 100 millimeters |
| 10 decimeters = | 1 meter (m) | = 1,000 millimeters |
| 10 meters = | 1 dekameter (dam) | |
| 10 dekameters = | 1 hectometer (hm) | = 100 meters |
What size is a 10mm nut?
A: This product is 10mm in thread size, 0.4375 in (11mm) in height. Part# 801736, 1/4 in. -20 Zinc Plated Hex Nut, is about 5mm thick. Helpful?
What size is 3/16 in MM?
4.78 mm
Conversion table inches to mm
| Dimensions — Inches to Metric | ||
|---|---|---|
| 0.188” | 3/16” | 4.78 mm |
| 0.250” | 1/4” | 6.35 mm |
| 0.313” | 5/16” | 7.95 mm |
| 0.375” | 3/8” | 9.53 mm |
What is 3/4 as a decimal?
0.75
The decimal form is 0.75.
What is a 10 mm socket in standard?
3/8″
Metric / Standard Wrench Conversion Chart
| Bolt Diameter | Metric | Standard |
|---|---|---|
| 3/16″ | 10mm | 3/8″ |
| 1/4″ | 11mm | 7/16″ |
| 5/16″ | 13mm | 1/2″ |
| 3/8″ | 14mm | 9/16″ |
What is the same size as a 10 mm?
| MM | Approximate Size In Inches | Exact Size In Inches |
|---|---|---|
| 10mm | Little over 3/8 Inch | 0.39370 Inches |
| 11mm | 7/16 Inch | 0.43307 Inches |
| 12mm | Just short of 1/2 Inch | 0.47244 Inches |
| 13mm | Little over 1/2 Inch | 0.51181 Inches |
What size is M10 in standard?
Is 10mm bigger than 3 8?
Smaller items are usually measured in milimeters as it is a more accurate measurement.
| MM | Approximate Size In Inches | Exact Size In Inches |
|---|---|---|
| 9mm | Just short of 3/8 Inch | 0.35433 Inches |
| 10mm | Little over 3/8 Inch | 0.39370 Inches |
| 11mm | 7/16 Inch | 0.43307 Inches |
What is 13 32 as a decimal?
As you can see, in one quick calculation, we’ve converted the fraction 1332 into it’s decimal expression, 0.40625.
What size is a 3/8 bolt in metric?
9.5
US to Metric Conversion Table
| US (inches) | Metric (millimeters) |
|---|---|
| 3/8 | 9.5 |
| 7/16 | 11 |
| 1/2 | 13 |
| 9/16 | 14 |
What is a 15/16 socket in mm?
Metric / Standard Wrench Conversion Chart
| Bolt Diameter | Metric | Standard |
|---|---|---|
| 9/16″ | 21mm | 13/16″ |
| 22mm | 7/8″ | |
| 5/8″ | 24mm | 15/16″ |
| 25mm | 1″ |
What size is 10mm?
SAE to Metric Conversion Chart
| SAE | Metric | Inch |
|---|---|---|
| 10mm | 0.394 | |
| 13/32″ | 0.406 | |
| 11mm | 0.433 | |
| 7/16″ | 0.438 |
What MM is 3/16 socket?
That’s the formula that our calculator uses to find that 3/16 inch to millimeters is 4.7625 mm.
SAE to Metric Conversion Chart.
| Standard (SAE) | Metric (mm) | Inches (decimal) |
|---|---|---|
| 3/16″ | 4.7625 mm | 0.188″ |
| 5 mm | 0.197″ | |
| 5.5 mm | 0.216″ | |
| 7/32″ | 5.5563 mm | 0.219″ |