Are drum mowers any good?
Durability. Drum mowers are easily the most rugged of the hay mower types. They rarely sustain damage even from striking an unmovable object. This makes them a great choice for contract cutting in unfamiliar fields or for mowing unruly pastures.
What is the largest drum mower?
The Ibex TM67 drum mower is a sturdy, low maintenance machine designed for larger compact tractors. Simple and durable, it is easy to use and will give you years of trouble-free service.
…
DIMENSIONS AND WEIGHT.
| Weight | 814 lbs |
|---|---|
| Cutting Width | 5 ft 7 in (67 in) |
What is a drum hay mower?
What is a drum mower. Basically it’s a simple design hay mower. It could be an alternative to a disc mower or even a sickle mower. This side drum mower has no belts that might come off or need
How does a drum cutter work?
Rich Elliott: A drum cutter is a hydraulic attachment on which drums equipped with numerous picks spin around at up to 110 revolutions per minute to cut rock, concrete or frozen ground. The picks that perform the cutting job are wear-resistant, exchangeable teeth.
Which is better disc mower or drum mower?
Drum mowers are lighter and smaller than disc mowers, and they can be driven with less horsepower. Disc motors require hydraulic lifting, and hydraulic lift capabilities can be very handy in cases where you’re moving between several small fields. Disc mowers can cut more grass with each path.
Does a drum mower ride on the ground?
5) Very easy to maneuver, it rides the ground so your height adjustment is actually the tilt so get a hydraulic top link, makes it a breeze to adjust. Yes a hydraulic top link would make changing cutting height a snap.
What is a Discbine mower?
How does a discbine or mower conditioner work? – YouTube
What does a Haybine do?
Haybine is the brand name of the first mower-conditioner. It combined the sickle bar mower and the hay conditioner to promote faster drying hay all in one process. The current versions produced by New Holland are branded the Discbine, since they now feature faster disc mowers.
Can you top with a drum mower?
The only issue with a drum mower is it won’t be able to float as well as a disc mower or floating topper. No issues with a topper here – most must not keep the blades sharp enough…. Toppers have their place, certainly would seem a better bet on rough ground. Blades are kept as sharp as a knife.
What is a drum cutter?
A drum cutter is an attachment where rotating drums equipped with picks, strategically positioned around the outer diameter, are rotated by a hydraulic motor at several hundred revolutions per minute to cut rock, concrete or frozen ground.
How fast can you mow with a drum mower?
10 mph – easily achievable by a mid-sized utility tractor with a disc or drum mower, assuming it has the horsepower. 15 mph – Possible with a large tractor (category 2 or larger) and drum mower.
How much horsepower does it take to run a Discbine?
The 540-rpm drive and low horsepower requirement mean you can mow and condition your crop for fast drying with as little as 65 PTO horsepower. A straight tongue with a clevis hitch is featured on both models. These two models make a 10′ 4” cut and require only 80 PTO horsepower for operation.
How much horsepower is needed for a Haybine?
Specifications
| Haybine® 488 | |
|---|---|
| Minimum Tractor Req | |
| Minimum Tractor Req | 35-hp (26.1 kw) |
| One remote hydraulic circuit required, capable of 1500 psi (10342 kpa) | |
| Operating Speed |
What’s the difference between Haybine and Discbine?
How much horsepower do you need to run a Discbine?
Is 25 hp enough for a tractor?
We wouldn’t recommend going below 25 engine hp, but aside from that, you need to assess your land and your needs. If you need to do basic mowing on flat terrain, find a compact tractor with 25 to 30 hp. If you need something more substantial for plowing, invest in the 45 to 85 hp range.
How much PTO HP do I need?
Remember, you need to match the tractor to the job you want to do. If you want to operate a five-foot cutter (shredder), a good rule of thumb is 20 PTO horsepower (not engine horsepower). A six-foot cutter requires roughly 30 PTO horsepower.
What is the difference between a Haybine and an Discbine?
Does a Haybine cut hay?
How does a haybine or hay cutter work? How I cut hay on – YouTube
What is a Discbine used for?
In fact, New Holland coined the term “Discbine,” which has become the popular name that’s loosely used to refer to any disc mower-conditioner, regardless of brand. It’s no surprise, because even in tough conditions, a genuine Discbine disc mower-conditioner swiftly turns heavy crop into fast-drying windrows or swaths.
What is the smallest Discbine?
The smallest models of the Discbine family, the H7220 and H7320, provide a 9′ 2” cutting width and narrow transport, which is ideal for mowing tight spaces and passing through narrow entrances.
How much HP do you need to run a Haybine?
What is the most reliable tractor brand?
John Deere ranks highest among tractor brands for Overall Loyalty. John Deere won the highest marks for Best Ownership Experience (midsize and full-size tractors); for Most Durable (full-size tractor); and for Highest Owner Loyalty (compact, mid-size and full-size tractors).
Which tractor engine is best?
What Are the Top 10 Most Fuel-efficient Tractors?
- John Deere 5050 D. (Source: deere.com)
- Swaraj 855. (Source: pinimg.com)
- Powertrac Euro 50. (Source: ytimg.com)
- Sonalika 745 DI III Sikander. (Source: imimg.com)
- Farmtrac 45 Smart. (Source: tractorsinfo.in)
- Mahindra 475 DI.
- Massey Ferguson 1035 DI.
- Mahindra 275 DI TU.
What size tractor do I need for 10 acres?
If you have 10 acres, and/or moderate chores
A compact tractor that’s making between 30–60 horsepower is a good fit for mowing 10 acres and managing moderate chores. The stronger horsepower and torque reserve allows you to deliver more power to larger and heavier implements and attachments.