Are there different sizes of grease Zerks?
The most common standard grease zerk size is 1/4″‑28 SAE‑LT and is often used in automotive applications. They can also be found in agricultural environments as well as other various standard duty applications. For heavy-duty applications, larger 1/8″‑27 PTF grease zerk fitting sizes can be found.
Does a 2013 f150 have grease fittings?
Confirmed. There are no grease fittings on our trucks.
How often should you grease zerk fittings?
I usually grease every every 3000 miles.
How do you grease a ball joint without grease fitting?
Instruction to Grease a Ball Joint Without Fitting
- Check the Boot. At first, get the tire off.
- Prepare the Grease Gun.
- Inject Your Needle into the Boot.
- Start Pumping with the Grease Gun.
- Eject the Needle.
- Driving Test.
What is chassis grease?
Mobil Chassis Grease LBZ is a semi-fluid grease based on synthetic oils in the consistency group NLGI 00-000. It was specifically developed for central lubrication systems for commercial vehicles. The product contains anti-oxidants, corrosion inhibitors, extreme pressure and anti-wear additives.
Do they make metric grease Zerks?
Metric Grease Fittings are available in both regular and stainless steel. Metric Grease Fittings are also referred to as Metric Zerk Fittings, Metric Lubrication Fittings, Metric Hydraulic Fittings, and Metric Zerks.
What does Zerks mean?
(zɜrk ) noun. a small metal fitting through which grease can be inserted into a mechanical joint that requires periodic lubrication.
What is a Zerks?
Simply put, a zerk is a fitting that lets you inject grease lubricant into wear points on cars or trucks. This allows smooth, steady movement and better overall handling.
How often should you lubricate your chassis?
every six months
Lubricating your chassis every six months is the best way to keep it functioning and to ensure it is working with other vital structural components to deliver the smoothest ride possible.
Should you lubricate the chassis?
Most suspensions linkages and pivot points are lubricated with grease. Chassis components are exposed to the elements, including dust, water and extreme temperatures, so lubricants need to provide adequate protection. In general, the lubricating grease should provide: Wear protection.
Can you grease sealed U-joints?
Greaseable u-joints have been around longer than permanently sealed u-joints. Older u-joints were always greaseable. So if you’re asking, “Should I grease older u-joints?” the answer is yes. The common rule of thumb is to grease a greaseable u-joint every 5,000 miles.
What are grease fittings for suspension parts?
Touch device users, explore by touch or with swipe gestures. Grease fittings, otherwise known as Zerk fittings, allow your suspension parts to be greased. They are commonly found on ball joints, tie rod ends, pitman arms, and sway bar bushings. Greasing these fittings regularly helps keep your suspension quiet and working smoothly.
What is a grease set?
Sets include dispensing tips for grease fittings and bare lubrication points. Dispense from grease guns into grease fittings and bare lubrication points. These rigid tip adapters penetrate gaskets, sealed bearings, and joints to deliver grease to precise locations.
Which is the best grease gun Extension Adapter for cars?
Lumax LX-1434 Silver 14″ Extension Adapter. for Far-to-Reach Grease Fittings on Cars, Trucks, Farm Equipment. Equipped with Hydraulic Coupler and Slide-on Locking Sleeve. . . LockNLube Grease Gun Coupler locks onto Zerk fittings.
What kind of Grease hose does Lumax LX 1404 use?
Lumax LX-1404 Silver 90 Degree Grease Coupler for Hard-to-Reach Grease Fittings on Cars, Trucks, Farm Equipment. Ideal for Lubrication of Front and All-Wheel Drive Vehicles. . . Lumax LX-1208 36″ Thermoplastic Grease Hose, 4500 PSI (310 Bar) 1/8″ NPT Threads. Fully Bonded Construction to Maximize Kink Resistance and Minimize Bend Radius . . . . . .