Can I connect a subwoofer to my PC?
Plug a 3.5mm to dual RCA cable into the yellow output. This is a center / subwoofer dual output, so either the white or the red RCA is now the subwoofer out. Set the computer up to output 2.1 sound, plug the white and red RCA plug in one at a time and see which one makes the sub put out sound.
What cable do I use for subwoofer?
A subwoofer cable is typically a mono analogue audio cable with a strong shielding, as it is most often routed for long distances and with other cables and cannot be too sensitive to low-frequency noise.
Is a subwoofer cable A special cable?
Subwoofer cables are basically the longer and more powerful versions of RCA cables. They have thicker insulating material and more shielding to protect them from interference and noise, which can degrade your audio quality. They also use heavier-gauge wire to prevent power loss.
Is a subwoofer cable just an RCA cable?
Subwoofer cables contain RCA connectors on both ends. Subwoofer cables produce a deep, intense sound and the quality is far superior to that of typical RCA sound. Subwoofers transmit bass in addition to regular sound signals, so that when you listen to it in your home theater, TV shows and moves can really come alive.
How do I connect my subwoofer to my motherboard?
You need a cable that has a stereo 3.5mm mini plug at the PC end and two RCA plugs at the sub end. Set the PC to 2,1. That should turn on the subwoofer output but not the center dhannel output of the orange jack. Only one of the RCA plugs at the sub end will be active.
How do you connect subwoofer to computer speakers?
How To Connect Speakers To A Computer (Tutorial) – YouTube
Why do subwoofers have 2 inputs?
Dual input allows the subwoofer an extra sensitivity adjustment. Normally, it would be enough to use a mono LFE subwoofer signal from its processor. If you have a processor with very low output so you can use a Y-splitter. By using both inputs with the same mono signal doubles the subwoofer sensitivity.
Why do subwoofers use RCA?
An RCA cable connects a subwoofer to a receiver with an audio signal sent to the standard left, right, and center channels with a coaxial connection. A subwoofer cable typically contains the same wiring but has additional shielding added to reduce the speaker hum and provide greater sound clarity.
Do sub cables make a difference?
But, will a subwoofer cable matter or make a difference? Subwoofer cables do matter as they enhance sound quality through increased shielding added to the cable that serves to improve the analog signal sent through the wires and reduce audio hum that would otherwise be produced.
Can I use a single RCA cable for subwoofer?
Any single, standard RCA or subwoofer cable should do just fine. However, if the sub is exhibiting a hum with the RCA/sub cable plugged into it, then maybe try using a “shielded” subwoofer cable. One end of the subwoofer/RCA cable will be plugged into the Subwoofer Output on the back of your receiver.
How do you hook up a subwoofer cable?
Using a subwoofer cable (RCA cable), connect the subwoofer to the AV receiver by running the cable from the receiver’s subwoofer output to the subwoofer’s line input. Klipsch subwoofers can be connected via the LFE channel, the white RCA connection, or in a stereo pair by using both the white and red RCA connections.
Which port is for speakers on PC?
Connecting speakers or headphones to a 3.5 mm mini jack
One of these wires should connect to the left speaker, and another should have a 3.5 mm mini plug that connects to your computer’s audio output jack. If your speakers require a power source to amplify the audio, there should also be a power cord.
How do I connect a subwoofer to my laptop?
A subwoofer can improve the audio of your laptop.
…
How to Connect a Subwoofer to a Laptop
- Plug the mini-jack end of the mini-jack-to-dual-female RCA adapter into the headphones output of the laptop.
- Plug the male plugs of the dual-male-RCA-to-single-female-RCA adapter into the female jacks of the first cable.
Is a subwoofer mono or stereo?
Sub-outputs are usually only 1 Phono RCA connector, as the signal is mono, also called the LFE channel, which makes up X. 1 in the naming of a 5.1 or 7.1 surround setup. If there are more subwoofer outputs on the surround receiver, these are also in mono, it is possible to connect multiple subwoofers.
Can I connect subwoofer to line out?
If you are using your subwoofer with a computer speaker system, your speaker system may have a subwoofer output or a set of line outputs that can be connected to a subwoofer. If neither is present, get a Y-adapter like this one.
Does subwoofer need left and right?
Hooking Up Your Subwoofer
Most subwoofers have both a left & right input. It usually doesn’t matter which one you use. Some people will buy a “Y adapter” or “splitter” so that a single cable can feed both subwoofer inputs.
Does length of subwoofer cable matter?
A Not completely. While you could connect a subwoofer to your receiver using a coaxial cable longer than 20 feet and not experience problems, an RCA cable run that long is susceptible to electromagnetic interference (EMI) — especially if it crosses household electrical wires.
Does speaker cable length affect sound quality?
When long runs (of either interconnects or speaker cables) are used, cable quality becomes extra important. Due to the additional signal losses longer runs impose, the better the cable is at “protecting” the signal, the better will be the sound.
Do I need special RCA cables for subwoofer?
In order to hook up a powered subwoofer properly, an RCA “splitter” cable (“Y” cable) is not needed. Any single, standard RCA or subwoofer cable should do just fine. However, if the sub is exhibiting a hum with the RCA/sub cable plugged into it, then maybe try using a “shielded” subwoofer cable.
Why do subwoofers have 2 RCA inputs?
Can I install subwoofer without amp?
In nearly all cases, the answer is yes. Unless you have a system in your car or boat that is already powering a subwoofer, you’ll need to find an amplifier that will power your sub. Your head unit will typically provide a low-power signal (RCA output) that can be used for an amplifier to power your subwoofer.
What are the 3 audio ports on my PC?
The color-coded jacks on the sound card
The pink port is normally the microphone input, and is usually mono but might be stereo. The light blue port is normally the line input port and is usually stereo. The green port is normally the headphone output port, also usually stereo. Check your computer manual to be sure.
Which port do I plug my speakers into?
Are 2 subs louder than 1?
No. Unless the larger sub-woofer starts distorting when it gets louder or something then one is all you need, and two is usually worse unless placed in the room using math.
Can you use aux out for subwoofer?
Honorable. americanaudiophile : Yes you can hook it up that way. If you had non powered speakers they would connect to the sub.