Can wireless access point have same SSID?
You will be able to assign a single SSID and password to all of your access points instead of having to join different networks every time you move between rooms or floors.
What happens if two networks have the same SSID?
3 Answers. Show activity on this post. Two identically named SSIDs with the same password will allow your device to connect to either, without having to add any extra networks on your devices. If both routers are broadcasting from the same location, the expected behaviour will vary depending on device.
How do I configure multiple SSID for same access point?
Creating one WiFi network with multiple access points
- Connect two access points to the same network.
- Make sure that there is only 1 DHCP server.
- Use the same wireless network name (SSID) for both AP’s.
- Use the same password and encryption settings for both AP’s.
- Enjoy!
Can I name my access point the same as my router?
Yes, you can set them the same, but it will not work seamlessly whether you do or not. Plus if you have connection issues you won’t know which one you were connected to when you had them. I advise that you set a unique identifier for each band, on each device. Then just connect to each of them from your devices.
Should I use the same SSID for my access point?
Your advice about a separate AP is wrong. As long as it has the same SSID, password and auth mechanism and different (ideally non overlapping) channels you can roam between the 2 with a barely noticeable outage when you lose signal from one and go to the second.
Can I have 2 Wi-Fi routers with the same SSID?
You can run two routers with the same SSID to increase the range of your Wi-Fi network, but you must set up one router to handle the network administration and the other to act as a bridge back to the primary router.
Can I have 2 WiFi routers with the same SSID?
Can 2.4 GHz and 5ghz same SSID?
When setting up a Wi-Fi connection in the 2.4 GHz and 5 GHz dual-band Keenetic models, the same network name (SSID) and password are used by default. This feature was made for the convenience of users. With the same SSID in 2.4 GHz and 5 GHz bands, client devices will not need to reconnect.
Should I name my 2.4 GHz and 5ghz same SSID?
If you are working with just a lone Wi-Fi router, then using the same SSID on both bands can help devices stay connected, especially in areas where 5 GHz can’t reach but 2.4 GHz can.
Is it better to combine or separate 2.4Ghz and 5Ghz?
So, if you want to experience the best speeds and signals, we highly recommend separating the 2.4 GHz and 5 GHz bands by putting them on different SSID. Then, you’ll be able to decide on which band to connect to for each device.
Is it better to split SSID?
For general home use, separating your SSIDs by band is probably the way to go. Relying on imperfect band steering can often get you stuck on slower networks, though your mileage may vary across devices.
Is it better to combine or separate 2.4GHz and 5GHz?
Can I give two routers the same SSID?
Should I combine my 2.4 and 5GHz same SSID?
Can you have the same SSID for 2.4 and 5GHz?
Should 2.4GHz and 5GHz have same SSID?