Can you install travertine on top of concrete?
Travertine pavers can be laid mud-set (wet-set) on top of an existing concrete surface just like other paver or tile products.
Can you lay travertine on cement?
Travertine pavers should be laid on a concrete base. Before you lay your travertine pavers: Have the concrete ready first- Sweep off any loose pieces so that the surface is completely smooth. Any mould or mildew present must be removed.
What goes under travertine?
Add a crushed limestone base (4” – 5” is sufficient). Crushed limestone creates a solid base which will keep the travertine in place over time (without shifting) and allow for proper drainage.
Can you mortar travertine?
Travertine Pavers can be laid mud-set on top of an existing concrete surface. It is also called thick-set installation as the mortar bed is typically 1-1/4″ to 2″ thick. Here is the mud-set installation process: 1.
Is it a good idea to put pavers over concrete?
While it may seem like a good idea to install pavers right to the concrete, it may not be the best way to go about it. Pavers are great because of their flexibility. They are able to move and shift with the ground as it heats and cools. Concrete, on the other hand, can crack under the constant shifting.
Do travertine pavers need grout?
As the stone is a natural product, the holes will also attract mould and mildew. As such, we recommend grouting both the paver joints and the entire paver. Filling all the holes with a proper fine grout will make cleaning and general maintenance a lot easier for you.
Can you dry lay travertine?
Travertine paving can either be dry-set or mud set. If you are contemplating which option to go for before undertaking a travertine paver installation, you can never go wrong with the dry set method.
What Thinset do you use for travertine?
Use a white thinset with Travertine tile.
Using a white thinset is especially true with lighter Travertine. Remember that Travertine is porous; a gray or dark thinset can darken or tint the stone. By the way, be sure to mix the thinset to a sticky peanut butter consistency.
Should travertine be grouted?
Applying clear sealer or enhancer is recommended on travertine before grouting, so that the grout color does not penetrate the travertine tiles. Use clear sealer or enhancer as a grout release to insure a clean surface.
What type of mortar do you use on travertine?
FlexBond is among the leading brand name thin-set mortars and works well with the travertine tiles and pavers you’ll get from Travertine Mart. Other top-quality brands include MegaFlex, VersaBond Flex and VersaSet.
How do you tile over outdoor concrete?
How to Install Tile on a Concrete Patio or Porch – YouTube
How do you lay pavers on a concrete slab?
Mortar Set
- Step 1: Clean the concrete surface of all dirt, oil, and debris with a pressure washer and let it dry.
- Step 2: Place ½ inch of latex modified mortar underneath each paver, adhering it to the concrete.
- Step 3: Place the same latex modified mortar into the joints around each paver.
Should travertine holes be filled?
Classic Travertine Tumbled – left unfilled
More often than not, customers choose to fill the holes with grout after installation rather than see those holes fill with dust and organic matter such as leaves or grass clippings. In areas prone to damp, mould can quickly develop in the unfilled holes.”
What causes holes in travertine tile?
ANSWER – Travertine stone naturally has open holes within it as it is a fresh water sedimentary stone where naturally water runs through it. Although sometimes people install this stone without filling those holes if they like that look; particularly on walls in dry areas.
What adhesive do you use for travertine tile?
Either LTP Mattstone or LTP Colour Intensifier are ideal for sealing Travertine. We recommend LTP MPG for Polished Travertine. Adhesive and the way it is used is a very important stage during the fixing of Natural Stone.
What is the best adhesive for travertine?
What do you use to set travertine tile?
By the way, be sure to mix the thinset to a sticky peanut butter consistency.
Do I need to seal travertine tile before grouting?
Do you seal travertine tile before installing?
The sealing process of travertine tile is very easy. It should be done before or during installation and periodically afterwards. Sealing the travertine is required approximately after every three to five years.
Do you grout the holes in travertine?
These holes help to give travertine its characteristic look and finish. The holes can be filled with grout during the grouting process to help stabilize the stone, help keep it clean and give it a finished appearance, or left unfilled to provide a more natural look.
Can you lay tile directly on concrete?
You can install the tile directly on the concrete. You can install a CBU or cement board on the concrete, then the tile on top of that. Finally, you can use an uncoupling membrane between the tile and the concrete.
Do I need underlayment for tile on concrete?
Tiling on concrete does not always need an underlayment, but it is a good idea for extra strength and stability on uneven or rough substrates. Cracks may form on tile because of uneven concrete and changes in temperature or humidity.
Can pavers be glued to concrete?
Can You Glue Pavers To Concrete? Yes, not only you can, but you also should consider gluing pavers, especially in the border areas. As mentioned earlier, the sand can cause a certain level of shifting. Adding mortar or glue to the perimeter pavers will minimize that issue.
Why is my travertine tile cracking?
ANSWER – Hairline cracks in the travertine could have developed for a number of reasons. There could be cracks in the slab that have telegraphed through the stone, or there may be voids under the stone that isn’t providing enough support, or the tiles could be loose to some degree and can be susceptible to cracking.
Why is my travertine tile getting holes in it?
Travertine tiles are often sold filled and honed. This means that the holes have been filled with a resin in the factory and then ground down flat to a smooth honed finish. Over time the factory filled resin can also pop out and this can create holes in the travertine tiles.