How do I install HP Laserjet 1010 printer?
Select “Control Panel.” Click on “Devices and Printers.” Click on “Add a Printer.” This is found on the upper-left corner of the window. Choose “Add a Local Printer.” Click on “Next” to proceed. Select “Use an existing port.” A drop-down list will show; select “DOT4_001” from the options.
How do I install HP 1010 on Windows 11?
Type control panel click on the control panel click on the devices. And printers. Here just click on add a printer at the top in control panel click on add a printer.
How do I connect my HP Laserjet 1010 to Windows 10?
Here just click on the add a printer at the top. Click on the printer i want isn’t listed. Click on the add a local printer click on next click on the ports.
How do I reset my HP Deskjet 1010 printer?
Follow these steps to reset the printer. Without turning off the printer, disconnect the power cord from the rear of the printer. Wait 30 seconds, and then reconnect the power cord to the rear of the printer. Press the Power button to turn on the printer.
How do I install HP 1010 on Windows 10 64 bit?
How to install HP 1010 Printer on Windows 10 OS – YouTube
How do I connect my HP Laserjet printer to my computer?
Plug the cable into your printer and your computer’s USB port. The direct linking should trigger your computer to recognize the printer and start up the software needed to complete the installation. If your computer is still unresponsive, make sure you have enabled automatic device installations.
How do I reset my printer to factory settings?
1. On the printer display home screen, select the “set up” button (it looks like a gear). 2. Select “settings” > “device settings” > “reset settings” > “reset all” > “OK” and then “Yes.”
How do I manually reset my HP printer?
Turn the product on while you press and hold the Resume button for 10-20 seconds. The Attention light turns on. Release the Resume button. The Attention and Ready lights cycle while the product restores factory defaults.
How do I add a DOT4 port in Windows 10?
Configure the installed driver by changing the port from parallel to a DOT4 port.
- In the Devices and Printers window, right-click the name of the printer and then click Printer Properties.
- Click the Ports tab.
- Click the drop down menu, and then change the port from LPT1 to USB or DOT4.
- Click OK.
What is dot4_001 port?
Dot4 is basically USB. 001 is port 1.
How do I install my HP printer to my computer?
In Windows, search for and open Add a printer or scanner . Click Add a printer or scanner, and then wait for Windows to locate available printers. If your printer is found, click it, and then click Add device to complete the driver installation.
How do I get my computer to recognize my printer?
Simply plug the USB cable from your printer into an available USB port on your PC, and turn the printer on. Select the Start button, then select Settings >Devices >Printers & scanners. Select Add a printer or scanner. Wait for it to find nearby printers, then choose the one you want to use, and select Add device.
How do I reset my HP Deskjet printer?
How to Reset your HP Printer | HP Printers | HPSupport – YouTube
Can you reset HP printer to factory settings?
What is DOT4 printer port?
DOT4 is a protocol that allows a device that is part of a multifunction peripheral ( MFP ) to send and receive multiple data packets simultaneously across a single physical channel to other devices on the MFP.
How do I install DOT 4 ports?
How do I install a port for my DOT4 printer?
How do I remove the port from my DOT4 printer?
Right-click on the DOT4 port you want to remove and select “Uninstall.”
Can you install a printer without the CD?
The process for installing a printer without a disc will vary slightly depending on whether your computer operates on Windows or macOS. However, the first step will be to connect your printer via a USB. The majority of modern printers contain USB connectivity which helps to install the relevant drivers.
How do I install my HP printer without the CD?
Solution: 1 – Installation of HP Printer Via USB Cable
- Plug the printer’s USB cable into your computer.
- Turn on the HP Printer.
- Now click on the computer’s start button.
- Now click on settings.
- Then type Printers & Scanners and click on that.
- Now click on add a printer or scanner option.
How do I get my computer to recognize my HP printer?
Why is my HP printer not being found?
Restart the printer and the computer or mobile device to clear possible error conditions. Restore Wi-Fi setup mode. Most printers with a touchscreen display or menu: Open the Wireless or Setup menu, select Network setup or Settings, and then select Restore Network Settings.
How do you hard reset a printer?
It’s a pretty simple process:
- With the printer turned on, pull out the power cable from the back of the printer.
- Unplug the power cable from the wall outlet.
- Wait 15 seconds.
- Plug the power cable into the back of the printer.
- Plug the printer back into the wall outlet.
- Turn the printer back on.
- Run a test print.
How do I restore my HP to factory settings?
Turn on the laptop and immediately press the F11 key repeatedly until System Recovery starts. On the Choose an option screen, click “Troubleshoot.” Click “Reset this PC.” Click either “Keep my files” or “Remove everything” depending on which you prefer.
How do I put my HP printer in setup mode?
Restore Setup Mode on HP Printers Without a Touchscreen Display