How do I know what turbonetics turbo I have?
Please note that Turbonetics turbochargers do not have a P/N listed on the unit. You may notice a 5-digit number tag on the backplate? this is the serial number. Most serial numbers greater than T-20000 can be deciphered through the Turbonetics Owners Club and Turbonetics.
How big is a gt30 turbo?
Compressor Size | ——- |
---|---|
* Trim: | 84 |
* Inducer Diameter: | 58mm |
* Exducer Diameter: | 76mm |
* A/R | 0.6 |
How big is a 7675 Turbo?
Featuring a 76mm cast compressor wheel and a 75mm turbine wheel, this turbocharger is an excellent match for the widely-popular LS family of engines.
What size is a gt28 turbo?
Compressor Size | ——- |
---|---|
* Outlet: | 2″(51.2mm) |
* Trim: | 48 |
* Inducer Diameter: | 49.20mm |
* Exducer Diameter: | 71mm |
What size is a GT35 turbo?
GT35 Turbo | GT2871 Turbo | |
---|---|---|
Application: | for all 4/6 cylinder 2.5L-6.0L engines | for 1.5-2.0L engine |
Horse Power: | Up to 600HP | Up to 350HP |
Exhaust (Turbo Manifold) Flange: | T3 Flange | Standard T25 |
Exhaust (Downpipe) Flange: | 4 Bolt Flange | 5-Bolt |
How much HP does a gt35r have?
GT35-R Ball Bearing Turbo Charger
It can Produce 300 to 500 HP, Depends on Your Application and Setup.
How big is a 72mm turbo?
Additional information
Weight | 50 lbs |
---|---|
Dimensions | 12 × 12 × 17 in |
Turbine Inlet | T4, T6, V-Band |
Turbine Wheel Size | 83×74, 87×80, 96×88, 112×102 |
Turbine Housing A/R | 0.90, 1.00, 1.10, 1.15, 1.25, 1.30, 1.32, 1.40, 1.45, 1.58, 1.65 |
How much HP can a 76mm turbo make?
Duttweiler spec’d a 72 or 76mm turbo: “At full boost (25 to 28 psi), the 72 is good for about 800 to 950 hp and the 76 for 950 to 1,150 hp–so either would do the job and make the needed power at 8 psi.
What size turbo is a K04?
On the turbine side, the OEM K04 uses a 50.1mm inducer and a 44.5mm exducer 12-blade cast wheel.
What MM is a gt28 turbo?
Product Specifications: Compressor Wheel Inducer: 53.1mm.
How many MM is a gt3582 turbo?
Part of Garrett’s GT Series, the GT3582R uses the high flow 82mm GT compressor wheel.
What size is a gt40 turbo?
The GT4088R dual ball bearing turbo has a 800HP potential flow. Specs: Compressor Wheel Inducer: 67.8mm. Compressor Wheel Exducer: 94.0mm.
How much boost can a GT35 turbo handle?
GT35 Turbo | GT45 Turbo | |
---|---|---|
Horse Power: | Up to 600HP | Up to 600HP |
Exhaust (Turbo Manifold) Flange: | T3 Flange | T4 4 Bolt |
Exhaust (Downpipe) Flange: | 4 Bolt Flange | 3.5 ” V-Band |
Cooling Type: | Water + Oil | Oil Cooled |
How much horsepower does a 70mm turbo have?
For a moderate V-8 Twin Turbo setup, you can expect up to 900-1000hp. As far as the single turbo applications go, 350-600hp.
What size turbo should I run?
The calculation is simple: Divide the absolute outlet pressure that you think you want (14.7 + boost pressure) by the absolute inlet pressure that the Earth says you can have (14.7) and you’ve got your pressure ratio. Limiting yourself to a reasonable number is the hardest part.
Is K04 bigger than K03?
K04 is thicker compressor wheel is about 1.5mm bigger but what counts is the pitch of the blades. the pitch which is the A/R is more agressive than the K03.
How much psi can a ko4 handle?
I did some research on the net, and found that Warner (the KKK turbo distributor in the USA) says that the K04 can safely sustain a peak of 15 psi, while the K03 can safely sustain a peak of about 10-12.
What is a disco potato Turbo?
The GT2860RS is one of Garrett’s most legendary GT ball-bearing turbos. Nicknamed the ‘Disco Potato’ after the car that first used it—a B15 Nissan Sentra with a wild paint job—this turbo has become a staple in the tuner world and for good reason. It’s a reliable platform that delivers good power.
What size is disco potato?
64 or A/R 0.86(casing) , Inducer: 47mm/53,9mm, trim: 76.
What size is a GT45 turbo?
The cold side of DNA’s GT45 clone turbo featured a 0.66 A/R, a 69mm inducer, and a 98mm exducer. The hot side included an 88mm inducer, a 77.5mm exducer, and 1.05 A/R.
How many gt40s are left?
three
Of the five initial GT40 prototypes, only three remain today, and the other two are currently in the Shelby Heritage Center in Las Vegas.
Who owns the Number 1 GT40?
Current owner Rex Myers had the GT40 meticulously restored over a 15-year period, and it was completed just in time for the 2019 Pebble Beach Concours d’Elegance, where it placed second in the Postwar Sports Class. “The timing couldn’t have been any better,” Myers says in a video produced by Gooding.
What size turbo is GT35?
How much HP can a GT35 turbo make?