How do I restore my HP 1910 to factory settings?

20/08/202220/08/2022 | Sarah HendricksonSarah Hendrickson | 0 Comment | 12:00 am

How do I restore my HP 1910 to factory settings?

Restore to factory default configuration.
…
HP V1910-48G JE009A Factory reset – Password recovery capability enabled.

  1. Connect switch cable to COM.
  2. Open Putty on COM 38400 – 8 – 1 – N.
  3. Powercycle the switch.
  4. Press Ctrl-B at boot to enter extended boot menu.
  5. Skip current system configuration.
  6. Reboot.

How do I show running config on HP switch?

To display the running configuration using the WebAgent: In the navigation pane, click Troubleshooting. Click Configuration Report. Use the right-side scroll bar to scroll through the configuration listing.

How do you set the default gateway on a HP switch?

Menu: configuring IP address, Gateway, and Time-To-Live (TTL)

  1. From the Main Menu, select:
  2. Press [E] (for Edit).
  3. If the switch needs to access a router, for example, to reach off-subnet destinations, select the Default Gateway field and enter the IP address of the gateway router.

What is the default password for HP switch?

The default username for first time configuration is admin, no password is required.

How do I reset my HP A5120 to factory settings?

Unable to restore HP A5120 switch to factory

  1. Download application file to flash.
  2. Select application file to boot.
  3. Display all files in flash.
  4. Delete file from flash.
  5. Restore to factory default configuration.
  6. Enter bootrom upgrade menu.
  7. Skip current configuration file.
  8. Reserved.

How do I reset my HP switch password?

If you lose or have forgotten a switch password: Solution: You can clear the switch password by pressing the recessed Clear button on the front of the switch. This action deletes all password and user name protection from all of the switch’s interfaces.

How do I enter HP Router in config mode?

Configuration commands and the context configuration modes

  1. HP Switch(config)# interface c3-c6. HP Switch(eth-C5-C8)# HP Switch(config)# interface trk1. HP Switch(eth-Trk1)#
  2. HP Switch(eth-C5-C8)# HP Switch(eth-Trk1)# HP Switch(eth-C5-C8)#?
  3. HP Switch(config)# vlan 100.
  4. HP Switch(vlan-100)#
  5. HP Switch(vlan-100)#?

How do I download config files from HP switch?

To copy a configuration file from a USB device to the switch:

  1. Insert a USB device into the switch’s USB port.
  2. Execute the following command: HP Switch# copy usb startup-config HP Switch-config.
  3. At the prompt, press [Enter] to reboot the switch and implement the newly downloaded software.

What is IP default gateway command?

In the Command Prompt window, type “ipconfig” and press “Enter/Return” on your keyboard. You will see a lot of information generated in this window. If you scroll up you should see “Default Gateway” with the device’s IP address listed to the right of it.

How do I find the IP address of my HP switch?

For me the only valid way to find out IP addresses that belong to your switch is console connection to the switch. And then you can do whatever you need – look for IP addresses by “display ip interface brief”, change configuration, whatever.

How do I reset my HP switch?

Solution:

  1. Using pointed objects, simultaneously press both the Reset and Clear buttons on the front of the switch. The power and fault lights come on.
  2. Continue to press the Clear button while releasing the Reset button.
  3. When the Self Test LED begins to blink, release the Clear button.

How do I factory reset my HP 1920 switch?

To execute the factory default reset on the switch, perform these steps: Using a small, thin tool with blunt ends (such as a paper clip), press the Reset button on the front of the switch. Continue to press the Reset button until the Fault LED light begins to flash. Release the Reset button.

What is the default IP for Aruba switch?

In the factory default configuration, the switch has no IP (Internet Protocol) address and subnet mask, and no passwords.

How do I reset my HP computer without a password?

On the sign-in screen, press and hold the shift key, click the power icon , select Restart, and continue pressing the shift key until the Choose an option screen displays. Click Troubleshoot. Click Reset this PC, and then click Remove everything.

How do you unlock a HP laptop if you forgot the password without a disk?

Steps are as follows.

  1. Disconnect all connected devices and cables.
  2. Turn on or restart the HP laptop and repeatedly press the F11 key until the Choose an option screen is displayed.
  3. On the Choose an option screen, click Troubleshoot.
  4. Click Recovery Manager.
  5. Click System Recovery from the Help section on the left pane.

How do you save config on HP switch?

The switch maintains two configuration files, the running-config file and the startup-config file. Controls switch operation.
There are three ways to save a new configuration:

  1. In the CLI: Use the write memory command.
  2. In the menu interface: Use the Save command.
  3. In the WebAgent: Click Save.

How do I enable Web interface on HP switch?

Tutorial HP Switch – Enable HTTPS

  1. Open a browser software, enter the IP address of your Switch and access the HP Switch web interface.
  2. On the Service configuration screen, you will have to: • Select the option Enable HTTPS service.
  3. To remote access the switch using HTTPS, you will have to open a browser software.

How do I copy a configuration from one switch to another?

Telnet the first switch, copy the configuration on a simple text file using the show run command and paste it in the text file. Then connect to the new switch using a serial connection, go to the global configuration mode and paste the configuration to it. Alternatively you can use a TFTP server.

How do I copy running config to startup config?

Use the copy nvram:startup-config {ftp: | rcp: | tftp:} command to copy the startup configuration file to a network server. The configuration file copy can serve as a backup copy. Use the copy system:running-config nvram:startup-config command to copy the running configuration to the startup configuration.

What is IPv4 default gateway?

The ipv4-default-gateway command designates the default IPv4 gateway that the interface can reach. If the interface supports both IP families, use the ipv6-default-gateway command to designate the default IPv6 gateway. Use the no ipv4-default-gateway command to delete the default IPv4 gateway.

What is gateway on IP settings?

A gateway IP refers to a device on a network which sends local network traffic to other networks. The subnet mask number helps to define the relationship between the host (computers, routers, switches, etc.) and the rest of the network.

What is the IP address of my switch?

Select the Wi-Fi network icon on the taskbar and then Network settings. Select Wi-Fi. Select Advanced options, located towards the bottom-right. Under Properties, look for your IP address listed next to IPv4 address.

How do I find the IP address of a switch on my computer?

Right click the windows button in the lower left of your screen. Select command prompt from the list. A black and white window will open where you will type ipconfig /all and press enter. There is a space between the command ipconfig and the switch of /all.

How do you reset a manageable switch?

If this happens, power cycle the switch or press the Reset button to reboot the device.
To reset a smart switch using the web management interface:

  1. In your web browser address field, enter your smart switch IP address.
  2. Enter your case-sensitive password and click Login.
  3. Select Maintenance > Reset > Factory Default.

How do you reset a HP 1920 16g?

Restoring to factory defaults

  1. Using a small, thin tool with blunt ends (such as a paper clip), press the Reset button on the front of the switch.
  2. Continue to press the Reset button until the Fault LED light begins to flash.
  3. Release the Reset button.

Related Post