How do you install a LOC converter?
Goes to ground. And then the blue/white. Which is on your output. Side is your 12-volt remote output the blue-white cable is going to be spliced and ran all the way to your amplifier.
Is a line out converter necessary?
If you plan to have an amplifier added to a factory-installed audio system, chances are you’ll need a line output converter. It’s even more likely that you’ll need one that can provide a remote turn-on signal for that new amp.
What is an adjustable line out converter?
Line output converter converts speaker level or high level amplified signals into low level signals those that you can actually feed an amplifier with your issue is on most stock stereos.
How do I tap my rear speakers into subs?
Some (many) powered subs have high level inputs, so you can just tap into the rear speaker wires. If your car has a factory sub, use its speaker wire instead. If it doesn’t have high level inputs, you can use a basic line out converter that ties into the speaker wires and turns them into a rca output.
What is a SNI 35 used for?
The SNI-35 Adjustable 2-Channel Line-Out Converter from PAC Audio is a line-out converter for factory radios with 2 to 50 watts per channel, accepts speaker level input and provides stereo RCA output signal for adding an aftermarket amplified audio system.
How do you hook up a powered subwoofer to a factory radio?
How to install a powered subwoofer in your car | Crutchfield video
What’s the brown wire on line out converter?
There are usually 1 or 2 extra wires on a line output converter (often brown in color). These wires are used to ground the shield of the RCA output cables to the head unit.
Can you use a line output converter on a home stereo?
Yes, they work, with the usual disclaimer that going through a power amp stage will create some distortion that you wouldn’t have [as much of] with normal preouts.
Do aftermarket radios need line-out converters?
A: Line output converters are sometimes also needed to install a new stereo in a vehicle with a separate factory amplifier. They’re used in conjunction with vehicle-specific wiring adapters to make the new high-powered stereo work with the factory amp.
Can you wire SUBS to a stock radio?
Adding a subwoofer to a factory stereo is an excellent method to boost your sound while retaining your factory controls. The nifty devices can produce bass and sub-bass sounds at low frequencies. Thankfully, it’s pretty simple to wire one into an existing car stereo system.
Do I need to bypass factory amp?
By bypassing the factory amplifier, the music sounds more detailed and clear than it did when he used the amplifier integration harness. Whenever there’s one available, we recommend bypassing the factory amp to get better sound. If you’re considering a new stereo for your vehicle, keep this option in mind.
How do you use a line output converter?
Stock Radio & Speakers 4 Aftermarket SUB AMP Installation – YouTube
Can I install a subwoofer with a stock radio?
Can I install subwoofer without amp?
In nearly all cases, the answer is yes. Unless you have a system in your car or boat that is already powering a subwoofer, you’ll need to find an amplifier that will power your sub. Your head unit will typically provide a low-power signal (RCA output) that can be used for an amplifier to power your subwoofer.
Does a RCA converter need to be grounded?
No, the RCAs do not need to be grounded.
Do aftermarket radios need line out converters?
Can you hook up an amp and subs to a stock stereo?
What does a high low converter do?
The adapter converts high-level signal from the radio’s speaker line and transforms it into a safer low-level audio signal. This allows you to add a 4-channel amplifier to your system for higher power output and better sound quality.
Does Loc need power?
Active Line Out Converters
An Active Line Out Converter is a more advanced version of the standard passive line out converter. These require 12v power to output a signal. These converters also handle up to 400 watts per channel meaning OEM Amplified systems and high powered systems are not an issue.
How do I hook up amp and sub to factory radio?
The best way to connect it to a factory system is to tap into the stereo’s speaker outputs for the amp’s input signal. Then send the amp’s outputs back to the stereo’s harness, and on to the speakers through the factory wiring.
What does bypassing factory amp do?
How do I know if my factory amp is blown?
These are listed below: There is a noticeable distortion in the sound. There is no sound even if you have already turned on your audio system. Your stereo system starts making bizarre sounds such as farting sounds.
Do you need a new head unit for subs?
You’re Looking to Power a Subwoofer
If you want to install a subwoofer in your car audio system, you’ll need a way to power it. Most factory head units don’t have the ability to add a subwoofer and an external amp, which means that you’ll need an aftermarket one to make your system really come alive.
Can you wire a subwoofer to rear speakers?
Most speakers feature line-out connections on the back, making it easy to connect subwoofers via rear speaker wires or rear deck speakers. Another option is to connect both the speakers and the subwoofer to a dedicated preamp, channel amp, or factory head unit.
What is positive and negative on RCA cables?
There are no neg and pos in RCA cables. One is the left channel and the other is the right channel. Each cable contains its own positive and negative lead. Just plug the proper right channel or left channel plug into the appropriate socket.