How do you unlock Fisher Paykel DishDrawer?
Closed drawer auto-lock is on
Unlock by powering your DishDrawer™ back on (unless Keylock is activated, see above). Press any button and open drawer within 30 seconds.
How do I reset my Fisher Paykel dishwasher drawer?
Reset Procedures for the Fisher & Paykel Dishwasher
- Press and hold the button decorated with the key and lock image for five seconds.
- Press the power button to turn off power to the Fisher & Paykel dishwasher.
- Wait a few minutes and then press the power button to restore power.
How do I unlock Fisher and Paykel?
If Keylock mode is activated and the machine is powered off:
- To turn your washer on, press ‘POWER’ button, then touch and hold the button for 3 seconds to deactivate ‘Keylock’.
- To turn the washer off at anytime when ‘Keylock’ is activated simply press the ‘POWER’ button.
Why is my Fisher and Paykel dishwasher not turning on?
Ensure the dishwasher is plugged in and the power supply is turned on at the wall. Ensure the door is firmly closed. Ensure water is connected and turned on. Check the strainer and clean if necessary, it is located where the water inlet hose screws into the tap.
How do you unlock a dishwasher?
Dishwasher Controls – Lock and Unlock – YouTube
How do I turn off the child lock on my Fisher Paykel dishwasher drawer?
Keylock
- Keylock disables all the buttons – helpful when cleaning the dishwasher.
- To activate: press and hold and together until you hear one tone. The keylock indicator. will come on.
- To cancel: press and hold and together until you hear another tone and the keylock indicator stops flashing and goes out.
How do I reset my Fisher Paykel washing machine?
You can reset your washer to the default settings it left the factory with:
- Turn the dial to select ‘Spin’.
- Touch and hold the ‘Delay Start’ ‘More’ , the ‘Delay Start’ ‘Less’ and ‘Options’ buttons together for 3 seconds.
- Your washer will now be reset to the default settings.
Why is my DishDrawer beeping?
Drawer cannot drain. The drainage hose may be blocked or kinked, or the connection to drainage pipe may be blocked. Ensure the drainage hose and connection to pipes are not blocked. once to stop the beeping, and then again to clear the fault.
What does key lock mean on a Fisher and Paykel washing machine?
The Key Lock mode disables the control panel so that the storage environment cannot accidentally be changed. The display will automatically lock after 15 seconds of the display not being used or when the drawer is closed.
How do I reset my Fisher and Paykel washing machine?
How do you run a diagnostic on a Fisher & Paykel dishwasher?
Diagnostic Mode. With Power off, press/hold Keylock, then press Start/Pause at the same time for 5 seconds. Release the buttons when it powers-on. Press Power once.
Why is my dishwasher stuck on lock?
This is a sign of a child lock is on. You should press and hold the start button for five seconds. Then, release the button, disengaging the child lock. This is one of the most common reasons why this dishwasher will not open, so it should be enough to fix the issue.
How do I get my dishwasher out of Control Lock?
KitchenAid Control Lock function on your dishwasher – YouTube
What does key lock mean on Fisher and Paykel washing machine?
Keylock can be used to lock the buttons on your washer when not in use. This will avoid accidental button pushes from items left on the lid of the washer and also from any little fingers.
Is there a reset button on a Fisher and Paykel washing machine?
Touch and hold the ‘Start/Pause’ button for 3 seconds to reset the factory settings.
How do you unlock a locked washing machine?
How to open a stuck washing machine door – YouTube
How do you reset the beeping on a Fisher and Paykel dishwasher?
To attempt to Clear the Fault Code
- Press to stop the beeping. Press. again to turn the dishwasher off.
- Wait a few seconds. Press. again to turn the dishwasher back on.
What does red light on Fisher and Paykel dishwasher mean?
The red ECO light will indicate the feature is on. If your dishes are heavily soiled or you require enhanced dry performance, we do not recommend ECO programmes. If the DishDrawer® is operating and a power failure occurs, it will stop. The DishDrawer® may be unable to be opened during this time.
How do I turn off key lock on Fisher and Paykel?
To turn Keylock mode ON or OFF:
Touch and hold the KEYLOCK button for 2 seconds.
How do you unlock the door on Fisher and Paykel Wash smart?
To unlock the door during the cycle
Simply touch , the machine will pause and the door will automatically unlock if the conditions inside the washer are safe. The button and time to go will flash on the screen while the washer is paused. Open the door and remove or add garments.
How do you run a diagnostic on a Fisher & Paykel washing machine?
Reading Fault Codes and Diagnostics on Fisher Paykel Smart Drives.
Why is my dishwasher tablet door not opening?
The most common cause is that your detergent dispenser has become clogged up with old, dried-up detergent, but it could also be caused by one of several mechanical failures.
How do I turn off the child lock on my dishwasher?
LG Dishwasher Child Lock Feature – YouTube
Why does my dishwasher say it’s locked?
Contemporary Kenmore dishwashers come equipped with a Lock mode, which is a safety feature that prevents the unit from operating between cycles. You can use this feature to prevent children from inadvertently turning on the dishwasher when you aren’t around.
How do I reset my Fisher and Paykel machine?
Factory Reset
- Turn the dial to select ‘Spin’.
- Touch and hold the ‘Delay Start’ ‘More’ , the ‘Delay Start’ ‘Less’ and ‘Options’ buttons together for 3 seconds. will appear on the screen and the machine will beep.
- Your washer will now be reset to the default settings.