How high does Max Jack lift?
Specs
| Lifting Capacity | 6,000 lbs. (2,722 kg) |
|---|---|
| A Height Overall | 89.5″ (2,273 mm) |
| B Height of Column | 64″ (1,626 mm) |
| C Min. Pad Height | 4.5″ (114 mm) |
| D Max Lift Height (Pad Only) | 47.5″ (1,207 mm) |
Where is MaxJax manufactured?
MaxJax is Manufactured in BendPak’s State-of-the-Art Facility.
How thick should a concrete lift be?
4 inches
The recommended thickness for a car lift concrete slab is 4 inches minimum for most two-post lifts and four-post lifts. Additional thickness may be required for specific applications or different car hoist models.
How high do quick Jacks go?
24.5″
The QuickJack doesn’t lift high enough.
Super low to the ground (down to 3 inches, in fact) for frames to slide under performance vehicles, yet lift up to 7,000-lbs. to a 24.5″ lifting height (with stacked blocks). That’s high enough to perform all common maintenance tasks.
Are Max Jacks safe?
Question: Is the MaxJax really safe? Answer: Absolutely. Compared to floor jacks or jack stands, the MaxJax provides increased safety when installed and operated properly.
How much is Max Jax?
Compare Similar Car Lifts
| current product | ||
|---|---|---|
| MAX JAX | Dannmar | Dannmar |
| 6,000 lbs. Capacity Portable Mid-Rise 2 Post Car Lift | 4-Post Car Lift 9,000 lbs. Capacity | Symmetric Heavy-Duty 2-Post Lift 12,000 lbs. Lifting Capacity |
| $377000 /pallet | $556400 /pallet | $763900 /pallet |
| (42) | (1) | (0) |
Is MaxJax safe?
When did BendPak buy MaxJax?
Answer. In April of 2020, during the midst of the Covid-19 crisis, certain assets of GES, including the Max Jax patent and trademark were sold to BendPak Holdings LLC under an Assignment for the Benefit of Creditors proceeding.
Is 4 inches of concrete enough for a 2 post lift?
Here are our tips for making sure your installation is an uplifting experience. Some of manufacturers standards for a 2-Post and 4-Post Lifts require a minimum 4 inches of reinforced concrete slab to be safely installed.
How much weight can a 4 inch concrete slab hold?
A 4-inch thick concrete can support upto 40 pounds of weight. Weight should not exceed 40 lbs/sq ft on an undetermined 4-inch slab. 80 lb/sq ft in isolated areas is fine, but unless you know what the soil bearing and reinforcing is for that slab, you might be looking at cracking.
Is it safe to work under QuickJack?
QuickJack is much safer to operate than conventional floor jacks and stands. Once you get used to lifting your vehicle with the touch of a button, and you watch as both frames automatically lock in place, you’ll never want to return to a pre-QuickJack lifestyle.
How long do QuickJack cars last?
indefinitely
As long as QuickJack’s mechanical safety locks are engaged, vehicles can be raised and stored indefinitely.
Can a max jack lift a truck?
The MaxJax M6K’s 6,000-pound lifting capacity can handle most cars, light trucks, and SUVs.
Who makes MaxJax?
BendPak
Introducing The All New MaxJax® MaxJax has been redesigned from the ground up by BendPak. We’ve made 10 enhancements over the previous version that are featured below.
Are Max jacks safe?
Who makes the Max Jax?
How thick should a slab be for a 2-post lift?
4‐1/4″
Pre-Existing Minimum Floor Requirements:
| TWO‐POST MODELS | MIN. THICKNESS | MIN. COMP. STRENGTH |
|---|---|---|
| XPR‐10 SERIES MODELS | 4‐1/4″ | 3000 PSI / 28 Day Aging |
| XPR‐12 SERIES MODELS | 6 1/2″ | 3000 PSI / 28 Day Aging |
| XPR‐15 SERIES MODELS | 8″ | 3000 PSI / 28 Day Aging |
| XPR‐18 SERIES MODELS | 8″ | 3000 PSI / 28 Day Aging |
How thick should a garage floor be for a lift?
The manufacturer recommends slab thickness of 4 inches. We’re pouring 5 inches for the entire floor.
Do you need rebar for 4 inch slab?
Generally, you do not need rebar for a 4-inch slab. But if one should choose to reinforce their concrete patio, the reinforcement bar they should use should be a size #3, which is 3/8 in diameter. Generally, rebar has an immense impact on concrete.
What weight will 5 thick concrete hold?
5 = 72.5 pounds per cubic foot or 72.5 pounds per cubic meter. A 6-inch thick slab weighs 72.5 pounds per square foot, the maximum allowable weight. Do you know the weight of a 4-inch-thick slab of concrete?
How long can you leave car on QuickJack?
#7 Can I leave my vehicle stored on QuickJack? As long as QuickJack’s mechanical safety locks are engaged, vehicles can be raised and stored indefinitely.
Can you drive over quick jacks?
You can drive “over” the QuickJack frames (a recommended method), but do NOT drive on top of the frames. Driving on the frames could cause damage and void your warranty.
Is QuickJack safe to work under?
Can you work under QuickJack?
With the Quickjack, additional jack stands or bracing aren’t necessary. The system is designed to be completely safe to work under and has dual lock bars (one on each side) that lock the system in place, just like a traditional two- or four-post lift. It has a mid-rise locking position and a full-rise locking position.
Where is BendPak manufactured?
BendPak has automotive lift manufacturing facilities overseas, specifically in China. They manufacture their lifts in a modern factory that meets and exceeds all safety ANSI standards. You can be sure that any BendPak lift you buy is of the highest quality and will last for years.