Is HP ProCurve a managed switch?
The HP ProCurve 1700 Switch series consists of two 10/100, fanless, web-managed switches that are ideal for open offices that require silent operation or businesses making the transition from unmanaged to managed networks.
Are HP switches now Aruba?
Yes, As part of HPE’s (HP at the time) acquisition of Aruba, Aruba reverse acquired HP Networking. 16. X releases of ArubaOS-Switch have many new Aruba-centric features but will run on most of the older HP branded switches (ProVision).
How do I configure my HP switch?
How to: Configure a HP ProCurve switch
- Step 1: Connect your serial connection.
- Step 2: Conenct PuTTY.
- Step 3: Get the IP address.
- Step 4: Set time server.
- Step 5: Set SNMP community info.
- Step 6: Launch the web GUI.
- Step 7: Configure basic info.
- Step 8: Create VLANs.
How do I enable spanning tree on HP switch?
To set the spanning tree mode, follow the steps given below:
- Enter system view and use the command: system-view.
- Set the spanning tree mode and use the command: stp mode { stp | rstp | mstp | pvst } Specify the MSTI or VLAN for the spanning tree configuration varies with the spanning tree modes:
Does HP still make ProCurve switches?
HP ProCurve was the name of the networking division of Hewlett-Packard from 1998 to 2010 and associated with the products that it sold.
What is the default IP of HP switch?
The HP ProCurve Switch 1700 Series has a default IP address of 192.168. 2.10 with a subnet mask of 255.255.
What OS does HP ProCurve use?
ProCurve is a product brand, ProVision was and is the operating system that product brand runs (and ran) on. Aruba is now the actual product brand name of some of old ProCurve, ArubaOS-Switch is the operating system that actual product brand runs on.
How do I create a VLAN on an HP switch?
Configuring basic VLAN settings
- Enter system view, use the command: system view.
- Create VLANs, use the command: vlan { vlan-id1 [ to vlan-id2 ] | all }
- Enter VLAN view, use the command: vlan vlan-id.
- Configure a name for the VLAN, use the command: name text.
- Configure the description of the VLAN, use the command:
How do I check logs on HP switch?
To display the Event Log from the Main Menu, select Event Log . An event log display shows a sample event log display.
What is BPDU protection?
BPDU protection is a security feature designed to protect the active MSTP topology by preventing spoofed BPDU packets from entering the MSTP domain. In a typical implementation, BPDU protection would be applied to edge ports connected to end user devices that do not run MSTP.
What is difference between MSTP and RSTP?
RSTP provides rapid convergence of the spanning tree. MSTP, which uses RSTP to provide rapid convergence, enables VLANs to be grouped into a spanning-tree instance, provides for multiple forwarding paths for data traffic, and enables load balancing.
What does a ProCurve switch do?
The HP ProCurve 1410-8G, 1410-16G, and 1410-24G Switches are multiport switches that can be used to build high-performance switched workgroup networks. These switches are store-and-forward devices that offer low latency for high-speed networking.
Do HP switches have a lifetime warranty?
HP is offering a lifetime warranty on the device, which the company defines this way: “For as long as a product is owned, with next-business-day advance replacement (available in most countries).” Switch owners will be entitled to “standard next business day advanced-replacement (availability varies by location) with …
What is the default password for HP ProCurve Switch?
In the factory default configuration, the switch has no IP (Internet Protocol)address and subnet mask, and no passwords.
How do I check fan status on HP switch?
To check the state of the fans in the enclosure use the CLI command walkmib. fan state.” DESCRIPTION “An indication that the switch fan entity is faulty. DESCRIPTION “The number of times the fan has failed.”
How many VLAN we can create on switch?
4096 VLANs
A switch supports a maximum of 4096 VLANs, among which VLANs 0 and 4095 are reserved for system use, and VLAN 1 is the default VLAN. Therefore, you can only create VLANs 2 to 4094. You can repeat the vlan command multiple times.
What’s the difference between tagged and untagged VLAN?
VLAN-enabled ports are generally categorized in one of two ways, tagged or untagged. These may also be referred to as “trunk” or “access” respectively. The purpose of a tagged or “trunked” port is to pass traffic for multiple VLAN’s, whereas an untagged or “access” port accepts traffic for only a single VLAN.
What is the default password for HP switch?
The default username for first time configuration is admin, no password is required.
How do I filter my HP switch?
Select the static filter type(s). For inbound traffic matching the filter type, determine the filter action you want for each outbound (destination) port on the switch (forward or drop). The default action for a new filter is to forward traffic of the specified type to all outbound ports. Configure the filter.
How many types of BPDU are there?
two types
There are mainly two types of Bridge Protocol Data Units:
Configuration BPDU. Topology Change Notification (TCN) BPDU.
What is PortFast and BPDU guard?
The PortFast and BPDU. A BPDU is a data message transmitted across a local area network to detect loops in network topologies. Guard features enhance network reliability, manageability, and security for Layer-2 STP. STP is a network protocol that builds a logical loop-free topology for Ethernet networks. .
What is Bpdu guard?
BPDU Guard is a feature that defends the Layer 2 Spanning Tree Protocol (STP) topology against BPDU-related threats and is designed to protect the switching network. The BPDU guard feature must be activated on ports that should not receive BPDUs from connected devices.
Is STP better than RSTP?
Rapid Spanning Tree Protocol (RSTP) Rapid spanning tree protocol (RSTP) is as its name suggests, a faster transition to a port-forwarding state. Unlike STP, which has five switchport states, RSTP has only three: discarding, learning, and forwarding.
What is HPE parts Exchange support?
HPE Parts Exchange Service provides replacement parts that are either shipped to your location in advance of, or following your return of, defective parts to HPE. The service includes shipping charges for standard delivery, with options available for predetermined time and place of delivery and return pickup by HPE.
How do I reset my HP ProCurve switch?
To execute the factory default reset on the switch, perform these steps: Using pointed objects, simultaneously press both the Reset and Clear buttons on the front of the switch. Continue to press the Clear button while releasing the Reset button. When the Self Test LED begins to blink, release the Clear button.