Is Revell going out of business?
On January 10, 2018, Hobbico, Inc. filed for bankruptcy protection. On April 13, 2018, Revell USA temporarily ceased operations while they reorganized.
Is Revell Germany still in business?
Estes, the model rocket division, was sold to The Langford Group for 7 millian dollars. Another auction was held on April 13, 2018, to sell off the remaining brands including Revell USA and Revell Germany. Both companies were sold to a German firm identified as Blitz in court documents.
How do you seal plastic model decals?
If it’s really bad you can apply brief pressure to the décor with a paper towel. Once. This is done apply a clear coat to seal the decals.
How do you use Revell decal soft?
After the decal has been positioned on a painted part of the model, using the brush in the bottle cap, apply Revell Decal Soft evenly over the decal. Due to its softening effect the decal can be adjusted to the contours of the model with a firm brush.
Should you prime plastic models?
It’s not necessary, but some model enthusiasts prefer to prime their projects before painting them. Use a thin coat so you don’t obscure any details. The primer will slightly roughen the surface of the model, making it easier for paint to stick.
Should I paint my model before assembling?
You can paint your model after it’s fully assembled, or you can paint the parts individually before assembly. The choice is yours, and these steps can help you achieve the results you want: Gather your tools: Be sure to have all the tools you’ll need ready to go before you start painting.
What happened to Monogram models?
Monogram (company)
| Formerly | Revell-Monogram (1986–2007) |
|---|---|
| Defunct | 2007 |
| Fate | Company defunct, “Monogram” brand logo disappeared from products since Hobbico acquired it |
| Headquarters | Elk Grove, United States |
| Products | Plastic model cars, aircraft, spacecraft, ships, military vehicles |
Is Revell German?
Revell is the undisputed market leader in model building in Germany with a market share of 70% – and not without reason. The Revell kits set quality standards in plastic model making. The models are characterized by high accuracy of fit and attention to detail, indispensable for every model builder.
Can you clear coat over model decals?
(HOW TO) use 2K clear on model cars/clear over decals – YouTube
How long do you soak model decals?
Cut the decals out from the sheet one at a time and submerge them in tepid (luke-warm) water for 30 seconds, or until the decal can be moved on the backing paper. Be careful not to over-soak the decals or use water that is too warm as this can cause them to leaved the backing paper whilst still in the bath!
What does decal softener do?
It completely softens the decal to allow it to adapt and be perfectly fixed to the surface of the model in order to avoid the appearance of wrinkles, and in this way, you can obtain perfect results that otherwise would be impossible.
How do you apply decals to soapy water?
You can apply most smaller decals without using water, but for large and very large stickers, this trick is a life-saver. After cleaning your surface area, wet the area again using a spray bottle and a solution of about 5% soap / 95% water. Apply the sticker while the area is still wet.
What paint is best for plastic models?
To paint plastic models, you should use either acrylic or enamel paint. Acrylics dry fast and are non-toxic, but they can leave brushstroke marks. Enamels can achieve an airbrushed effect, but they are toxic, so they must be used in well-ventilated areas.
How do you avoid brush strokes when painting models?
To avoid brush strokes:
- Use thin paint! Your paint should go on wet so it can self-level, and not so thick that it holds the stroke.
- Use a long-bristle SOFT brush.
- Vary direction – work roughly perpendicular to the coat beneath.
- If necessary, gently sand with very fine sandpaper.
Is acrylic or enamel better for models?
With the correct application, curing time and prolonged care, enamel paint can maintain its rich color and beautiful finish for many years. It may take longer to cure than acrylic paint, but many model car enthusiasts trust enamel paint as the best choice for longevity.
Are Revell and Monogram the same?
Mattel acquired Monogram in 1968, and the firm passed through various owners and was merged with Revell, the combined company being bought by Hobbico in 2007. Along with Revell, AMT, and MPC, Monogram is sometimes called one of the traditional “Big 4” in plastic modeling.
Are Revell and Monogram the same company?
Revell was founded in California in 1943 and in 1986 merged with chief rival Monogram.
What is Scalemates?
Scalemates are dragon plush dolls, most commonly associated with Terezi Pyrope. She often enjoys hanging them. It is possible that the word scalemate is a portmanteau of palemate. —another way of saying Moirallegiance—and scale, referring to the scales of a dragon.
Should I lacquer over decals?
Most people consider that the decals will last longer because of having a coat of clear paint or lacquer applied over them. Is it true? Well based on our experience, unless it’s absolutely necessary, we see there is no reason to clear over the top of vinyl decals.
How many coats of clear coat does a model car have?
two
Clear coats on Scale Models
There are generally two type of clear coats used for models, Gloss and Matt. There is also a semi-gloss coat, between these two type, but this is not hardly ever used for scale model work. Gloss coats would suit racing cars, where the actual vehicle is highly polished.
How do you make a decal setting solution?
How to Make a Home Brew Decal Setting Solution – YouTube
How do you soften model decals?
The Process:
- Paint the model as normal but don’t weather it.
- Brush a thin, flat layer of gloss varnish to where the decal will go, and allow to dry.
- Apply the waterslide decal as normal.
- Before it has completely set, gently brush on a layer of Micro Sol, covering the decal without saturating it.
Can I use Windex to apply decals?
If you’re applying the decal to glass, DO NOT use Windex or other ammonia-based cleaners; the ammonia interferes with the adhesive. For small decals like the “Objects In Mirror” one, smooth the decal down onto the glass with your finger.
Will air bubbles in decals go away?
Stubborn bubbles can be removed using a hairdryer as the adhesive on the decal will soften upon heating. Apply heat to the decal for a minute by switching on and aiming the hairdryer towards it. Iron out the bubbles toward the sides of the decal to eliminate them.
Do I need to prime plastic models before painting?
Do I Need to Prime Plastic, Metal, or Resin Miniatures? Priming a model helps paint stick and gives any paint job long-term durability. This is especially important if you’re handling and moving your painted miniatures during gameplay.