Is the KTM 690 Duke reliable?

Is the KTM 690 Duke reliable?

13 owners have reviewed their KTM 690 DUKE (2016 – 2019) and rated it in a number of areas. Read what they have to say and what they like and dislike about the bike below.
…

Is a 2008 KTM 690 fuel injected?

The fuel injection is spot-on and makes for crazy-good throttle response. This bike is quiet and sounds good, too!

How long do KTM 690 engines last?

The 690/701 engines are good and can reach very high mileages. Sure there are some that claim they use a lot of oil or needed a new engine within 10,000km… but there are also quite a lot of them that have covered well over 100,000 km without issues.

Is Duke 690 discontinued?

KTM will not launch the Duke 690 in India and the company will discontinue the model in the future, replacing it with a twin-cylinder bike. The said information was revealed by KTM CEO Stefan Pierer at the RC 200 and RC 390 launch event earlier today.

How fast does the KTM 690 Duke go?

KTM 690 Duke top speed is 120 mph.

How fast is a KTM 690 Duke?

KTM 690 Duke

What year did KTM become fuel injected?

What many people don’t realise is that the evolution of KTM’s fuel-injection R&D program kicked off in 2004 in collaboration with Australian company, Orbital; that a ‘Direction Injection’ system almost went into production a few years ago; and that the breakthrough ‘Transfer Port Injection’ system was discovered almost …

What is high mileage for a KTM 690?

Doing some research on the LC4 engines, seems like they can last 50-60k miles before needing head work.

Is KTM engine long lasting?

You can expect 50000kms. In case of 690 Duke, technically there is difference in engines as 690 have claw shifted transmission, hydraulically operated clutch and different lubrication type; you can expect the same.

Is the KTM Duke 690 fast?

Where are KTM engines made?

The heart of each and every KTM is created within the engine plant in Munderfing in Austria, a short distance from Mattighofen. Nearly 200 people work here every day and produce 300 to 400 engines.

How much does a KTM Duke 690 weight?

KTM 690 Duke Specs. The KTM 690 Duke model is a Naked bike manufactured by KTM . In this version sold from year 2018 , the dry weight is 148.5 kg (327.4 pounds) and it is equipped with a Single cylinder, four-stroke motor.

How much horsepower does a KTM 690 have?

74 HP

The 2021 KTM 690 Enduro R: At Home On The Road Or Off It
On the other hand, that engine has a displacement of 693cc, and produces 74 HP and 54 lb-ft of torque.

When did KTM start using TPI?

For 2019 KTM began offering U.S. customers the 300 XC-W model with (TPI) and oil injection. The fuel injected 300’s were previously available only in the international market.

Is the 2010 KTM 690 fuel injected?

All 690s are fuel injected, biggest changes were suspension travel (and the resulting seat height) and the headlight/instruments setup.

How long will a KTM engine last?

How many miles will a Husqvarna 701 last?

The Husqvarna 701 Long Range is aptly named. Few motorcycles can go as far, street or dirt. The increase in capacity gives the bike well over 300 miles of range. That’s more than anything in the combined KTM/Husqvarna product lines.

Are KTM Dukes reliable?

Overall, the KTM Duke 390 is a really reliable bike. It can last up to 100,000 miles with adequate maintenance. But, this doesn’t mean you should try overtaxing the drivetrain and engine. It’s a well-known fact that this bike is prone to suffering from particular issues, such as engine failure from overheating.

Is KTM as reliable as Yamaha?

Some brands, like Yamaha and Honda, are almost synonymous with reliability. With other brands, like KTM, the opinions are more varied. So are KTM adventure bikes reliable? Based on a survey of more than 10 000 bike owners, Consumer Reports ranks KTM in 8th place in terms of reliability.

Are KTM bikes reliable?

The results shows that KTM is ranked in 8th position in terms of most reliable brand. According to owners, parts are readily available and most owners are satisfied with their KTM experience. The survey has also found that KTM’s dirt bike reliability is similar to the top Japanese brands.

What does KTM stand for?

Kronreif & Trunkenpolz Mattighofen
December 25, 2020. With a name like KTM, which stands for Kronreif & Trunkenpolz Mattighofen, it’s not surprising that the company likes to rely on initials for model naming. It would be easy to say that dirt bikes have letter model names, while the street bikes have traditional names.

How fast can a KTM 690?

KTM 690 Duke top speed is 120 mph

Why did KTM stop TPI?

WHY DID KTM DECIDE TO NOT USE A DIRECT INJECTION DESIGN? KTM did a lot of testing using direct injection systems, but decided they were too complex and changed the behaviour of the bike too much.

What year did KTM go fuel Injected?

The air and fuel was mixed in a pre-chamber and then, under high pressure, injected into the combustion chamber directly. The project kicked off in 2004, developed by KTM in conjunction with an Australian company called Orbital, and the first running prototype came in 2006.

What year did KTM start fuel-injection?