Is the SR Suntour XCR a good fork?
Excellent fork, saved a few ounces from the factory one. Very smooth ride and takes a beating. I don’t do any hardcore trails but do ride off road quite a bit and for a big guy (260lbs) this shock works perfectly! Good product, well made and easy to set up.
Is the Suntour XCR 32 an air fork?
The XCR 32 LO R AIR is SR SUNTOUR’s first offering of an air sprung fork in our XC category of suspension forks. It features externally adjustable rebound, and air spring for a more precise set up and a hydraulic lockout that can be used on the fly.
What is the difference between Suntour XCM and Xcr?
Registered. XCR is really similar to the XCM but is a lighter build, which, given the coil, functionally makes them very close. The XCT is almost a hybrid fork. The build is much less dialed, and it isn’t really meant for riding where the front wheel spends much time off the ground.
How are mountain bike forks measured?
The length of the fork is usually measured parallel to the steerer tube from the bottom of the lower bearing race to the center of the front wheel axle.
How do you adjust the Suntour XCR fork?
Suntour XCT Fork Adjustment – YouTube
Is Suntour XCM good?
4.0 out of 5 stars Budget fork offering good quality, just don’t expect Rox Shocks and you’ll be satisfied. Great product at a budget price. I wasn’t expecting a top end fork at this price however I was pleasantly surprised with the quality and ride that this fork has.
How do you adjust the SunTour XCR fork?
Who owns SR SunTour?
Mori Industries Inc.
SR-SunTour
(with manufacturing plants in Taiwan) bought Sakae Ringyo Company. In 1988 the SunTour name was purchased and revived by Sakae Ringyo Company, (now owned by Mori Industries Inc.) with a capital investment of 45,000,000 NT$ in Tokyo, Japan, thus becoming SR-SunTour.
Is SunTour XCM air fork?
This XCM 20 Air has all the important features of our adult forks just in a pint sized package. Top quality fit and finish that you expect with SR SUNTOUR products in a light weight chassis. Air adjustment allows to custom set the fork for riders of any weight or skill.
How do I know what size my fork is?
Fork Length (Axle-to-Crown)
The more common method of specifying fork length on modern bikes, measured in a direct line from the fork crown to the axle. Length-on-Axis is the less common method of specifying fork length on modern bikes, measured from the fork crown to the axle along the steering/head tube axis.
How do I know what size fork will fit my bike?
Take your existing front wheel out and measure the current axle diameter to work out further narrow down what fork your bike can accommodate.
Can you adjust SR Suntour forks?
The spring rate of the Suntour NEX suspension fork can be adjusted for a softer or firmer ride. The adjustment knob is located on the left side of the suspension fork. First, remove the cap that covers the adjustment knob. Use a flathead screwdriver and be careful to not remove the cap with excessive force.
What does preload do on a mountain bike?
The preload refers to the amount of sag the shock will allow when the bike is at rest with the rider’s weight bearing down on it. Determining the correct preload is important because if it’s too high, it takes more energy to move the shock and compress the springs, resulting in a harder and desensitized shock system.
Is the SR Suntour XCM an air fork?
Does Suntour XCM have lockout?
Coil springs 120mm travel the Suntour XCM-LO 27.5 is an ideal suspension fork for the rider looking to upgrade their ride. Featuring manual lockout technology allows the rider to stiffen the suspension when riding on firmer ground making it flexible for multiple trails and more efficient too.
Does suntour make good shocks?
The higher-level Suntour forks and shocks are very good. Don’t judge them by the bottom budget forks.
Which is better air fork or coil?
If you ride cross country, stick with air forks – they are easier to use, and provide good performance across all but the extremes. If your bike takes some big hits and impacts, use a coil fork – they are stronger and you cannot beat the coil setup for bigger hits.
How do you service a SunTour XCR forks?
Suntour XCR Fork Service – Disassemble/Clean/Lube/Re …
What size are my bike forks?
The traditional standard has long been 1 1/8” but some modern bikes feature larger 1.5” head tubes or even tapered versions, where the diameter of the tube at the bottom (1.5”) is larger than at the top (1 1/8”) , so you’ll need a fork with a tapered steerer tube to match.
Can you put a 130mm fork on a 100mm bike?
at 130mm you’ll probably be fine, I wouldn’t put anything bigger on there. The kona frames are pretty strong, I used to run a 130mm fork on my 100mm jump bike for AM and a lottle more FR riding, I was fine.
Can I put a 29er fork on a 26 bike?
It would work, but there would be no benefit to it at all. It would probably just mess up the bikes geometry and add weight. You would only get more travel if the fork you put on has more travel than the one its replacing.
How do you soften a fork on a suntour?
Use a flathead screwdriver and be careful to not remove the cap with excessive force. Then use a 5mm HEX key to adjust the knob; some models use a slotted head that can be adjusted with a coin. For a firmer ride, adjust the screw clockwise a few clicks; for a softer ride, adjust the knob counter-clockwise a few clicks.
Can you use WD40 on bike suspension?
Please don’t use WD40, GT85 or any similar products! Instead of cleaning your seals, they will wash away the grease under the seals, letting dirt in much more easily– even if you’re careful you will also risk contamination of brake rotors/pads and these products can also dry out seals.
Does increasing preload increase ride height?
The suspension may feel stiffer when preload is increased, but that’s because adding preload compresses the spring, so it takes more pressure to move the suspension any further. Adjusting preload simply determines the motorcycle’s ride height.
Can I use 27.5 fork on a 26 frame?
Condensed answer: A 26-inch wheel can be easily installed on a 27.5 fork if both are disc brake ready. If the fork uses rim brakes, however, the braze-ons would be a bit higher, and the calipers won’t catch the rim.