What axle is in a Ram 3500 dually?

What axle is in a Ram 3500 dually?

The 3500 Dodge Ram rear axle of this generation was made with a Dana 80 differential. The third generation Dodge Ram 3500 rear axle options for the 2500 and 3500 were the AAM 10.5″ and 11.5″ with 30-spline rear-axle shafts. The rear 11.5″ has a gear ratio “carrier split” at 3.73 and numerically higher.

What is a 2006 Dodge Ram 3500 worth?

2006 Dodge Ram Pickup 3500 Value – $3,439-$24,475 | Edmunds.

How much horsepower does a 2006 Dodge Ram 3500 have?

325 to 330 hp2006 Dodge Ram Pickup 3500 / Horsepower

What did a Dana 80 come in?

Dana 80 Rear Axles have been in production since the 1988 Model Year. They have been used in Chevy/GMC 1992-2002 , Dodge(1994-2002), and Ford (1988-current) trucks vans, and motorhome chassis.

What is the difference between a 3.73 and 4.10 axle?

4.10s are going to accelerate faster and decelerate faster on lift. However the trade off is greater fuel consumption per mile driven and higher engine speed per given road speed. In basic terms the 4.10s will feel quicker and 3.73 will feel faster.

What rear end is best for towing?

The higher the ratio, the more revolutions per minute. Towing: For pickup trucks released after 2010, the best axle ratio for towing falls somewhere between 3.55 and 3.73. This range provides good acceleration for V8 gas and diesel engines.

How much weight can a 2006 Dodge Ram 3500 tow?

9,800 to 16,150 lbs2006 Dodge Ram Pickup 3500 / Towing capacity

How many gallons does a 2006 Ram 3500 hold?

34.0 gal
SLT 4×2 Mega Cab 160.5 in. WB SRW 2006 Dodge Ram 3500 Specs

Fuel
Fuel tank capacity 34.0 gal.

What year 5.9 Cummins is best?

1994-1998 2500 & 3500

As far as performance potential goes, it doesn’t get any better than the mechanical P7100 equipped versions of the 12-valve 5.9L Cummins. They’re simple, rock-solid reliable, and can easily tick off a half a million miles if properly maintained.

Is a 5.9 or 6.7 Cummins better?

To sum up, the more simplistic 5.9 fixed geometry turbo means that while it tends to be more reliable, the more advanced 6.7 variable geometry turbo gives better performance. The Exhaust Brake is a big part of why the 6.7 Cummins is such a powerful towing machine.

Which is stronger 14-bolt or Dana 80?

By the numbers, the load-carrying and therefore torque capacity of the three axles from weakest to strongest is: 14-bolt, Dana 70, and Dana 80. Even so, reality and experience says 14-bolt axles are more than adequate for all but the most extreme off-road uses.

How strong is a Dana 80 rear end?

The Dana 80 has a GAWR up to 11,000 pounds (5,000 kg), however it is common practice among manufacturers to derate Dana 80’s. Gross axle weight ratings are lowered by the vehicle manufacturer for safety and tire reasons.

Is a 4.10 axle good for towing?

FACT: A 4.10 axle ratio is ideal for towing heavy loads in a mix of city and highway driving and when towing on varied or steep grades. A 4.10 axle ratio will provide improved acceleration in stop and go city traffic.

Are 3.73 or 4.10 gears better?

3.73 VS 4.10 Ratio

3.73 Ratio 4.10 Ratio
Not as fast off of the line Quicker Off The Line
Lower Torque Higher Torque
Better Gas Mileage Decreased Gas Mileage
Higher Top Speed Lower Top Speed

What is the best gear ratio for pulling heavy loads?

How much can a 6.7 Cummins tow?

With the available 6.7L Cummins® Turbo Diesel I6 engine, drivers can enjoy the off-the-chart performance and strong towing capabilities. Tow up to an astounding 19,680 pounds and take advantage of the maximum payload capacity of 3,160 pounds.

Does GVWR include load?

GVWR stands for Gross Vehicle Weight Rating
What does GVWR mean? It is the maximum loaded weight of your vehicle (or trailer), as determined by the manufacturer. GVWR isn’t just the weight of passengers and cargo but also the vehicle itself.

How many miles per gallon does a Dodge 3500 Diesel get?

Based on data from 73 vehicles, 3,072 fuel-ups and 1,154,577 miles of driving, the 2021 Ram 3500 gets a combined Avg MPG of 11.68 with a 0.15 MPG margin of error.

How long does DEF fluid last in Cummins?

2 years
It is recommended that DEF be stored between 12°F and 86°F, but when stored below 65°F, shelf life is extended to 2 years.

What year Dodge Cummins to stay away from?

The Dodge Cummins engine has been around since 1989, providing power to the Dodge Ram. That’s three decades of hard work – there are bound to be Dodge Cummins years to avoid after all that time. We recommend staying away from the 1991, 1992, 1993, 1999, 2001, 2003, 2006, 2007, 2008, and 2011 models.

How many MPG does a 5.9 Cummins get?

We own five Dodge 4×4 pickups with the 5.9L Cummins, and we are thrilled with all the trucks. All five trucks we own average 29 MPG highway, and 24 MPG in town. Cummins 5.9L has the fuel economy, speed, and the power to pull.

Is the 6.7 Cummins a million mile engine?

Ram claims the Cummins 6.7 engine to be good for 350,000 miles. The mileage is guaranteed if the scheduled services have been carried out timeously and no performance modifications have been done to the engine.

How long will a 2006 Cummins last?

We’ve gone through forums and the Cummins website to find out for you. The Cummins brand is extremely reliable and prides itself on long-lasting engines. The 5.9-liter engine can expect to churn out 300,000 to 400,000 miles.

Is a 14 bolt A 1 ton axle?

The 14-Bolt Is The Ford 9-Inch Of 1-Ton Trucks
Every diesel-powered pickup sold in the United States for the last 10 years has a full-floating rear axle.

How much weight can a Dana 80 handle?

11,000 pounds
The Dana 80 has a GAWR up to 11,000 pounds (5,000 kg), however it is common practice among manufacturers to derate Dana 80’s.

Related Post