What is a post driver called?
A post pounder, post driver, post rammer, post knocker or fence driver is a tool used for driving fence posts and similar items into land surfaces. It consists of a heavy steel pipe which is closed at one end and has handles welded onto the sides. It is normally used by one person, but larger versions may require two.
How does a post driver work?
There are no moving parts, nothing that requires maintenance or fuel—it’s just a solid piece of steel. You lift it up, you drive it downward onto a post, and the post inches its way into the ground. Repeat the process until the post has reached the correct depth, and you’re good to go.
How does a Montana Post driver work?
Through our hydraulic concrete breaker-based design, posts are driven by jackhammering them into the ground. You maintain full control of the post while driving at a rate of 800 blows per minute.
How do you use a post pounder?
This. Like that now you can do this however the most effective way to use this T post pounder is to raise it up and then slam it down but let go right as it impacts.
How long is a post driver?
Product Size: 600mm (23.6 inches) overall length. 156mm (6.14 inches) inside diameter. Heavy steel construction: 34 pound drive weight. Heavy-wall pipe and sturdy thick rod handles.
What weight t-post driver do I need?
What T-Post Weight Should I Use? Most commonly, t-posts come in two weights: 1.25 and 1.33 pounds per foot. For most applications, a t-post weighing 1.25 pounds per foot is ideal. When looking for something to withstand high-pressure, it’s best to use a 1.33 pound per foot t-post.
How does a gas powered post driver work?
Gas Post Drivers – These post drivers use a combustion motor to drive posts into the ground. The motion of a gas-powered post driver is similar to that of a jackhammer as it taps extremely fast. Rather than smashing a weight against a post, gas post drivers vibrate it into the ground.
What weight t post driver do I need?
Can you drive at post with a hammer?
How To Hand Drive A T-Post Into Hard Packed Stone Or Just Normal Soil
How far should t post go in ground?
T-posts are available in a variety of heights. When it comes to selecting the proper t-post for your project, choose a post that is 24″-36″ taller than your finished fence. That’s because the post will need to be buried at least 2′-2-1/2′ feet deep to prevent weather changes or determined animals from pulling them out.
How far apart should T posts be?
The Recommended T post Fence Spacing is 8 – 12 feet.
Can you pound in chain link fence posts?
Never pound the posts into the ground, especially if you have hard clay or rocky soil, because you’ll bend the tops. The hole should be slightly bigger than the posts, so you can back fill it with dirt packed tightly around the post.
Can chain link fence post be driven vs concrete?
Conclusion. If you want to install a fence that will last a long time, with less labor and time, you will want to drive the post and not concrete them in place. In all climates and soil condition except rolling sand a properly driven post will be easier to install, stronger, and last longer than a concreted post.
How deep should a post be driven?
Dig post hole so diameter of the hole is 3 times the width of the post (i.e., the hole for a 4” wood post should be about 12 inches wide). The depth of the hole should be 1/3-1/2 the post height above ground (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet).
Do T post go on the inside or outside?
Fence posts should be on the outside of the fence
The correct installation of ag fencing is to place it on the inside of the posts. This way, animals in the enclosure brush against the wire, not the posts. Fence posts that have been placed outside of the fence material will take nearly all of the animal’s force.
Does fence go on inside or outside of posts?
Which way should T posts face?
How to Install T Posts – YouTube
Which side of the fence should be your post?
Many customers are concerned about ‘Which side of the fence do the posts go on?’ or ‘What side of my fence should face the neighbor?’ , and understandably so. The ‘quick’ answer is that the finished, or good side of the fence faces the outside of your property, visible to neighbors and the outside world.
Is it better to drive fence post or concrete?
If you want to install a fence that will last a long time, with less labor and time, you will want to drive the post and not concrete them in place. In all climates and soil condition except rolling sand a properly driven post will be easier to install, stronger, and last longer than a concreted post.
Can you bury bottom of chain link fence?
The bottom of the fence with or without bottom rail should be installed no greater than 2″ above grade. Bury the chain link fabric – Burying the fabric 12″ or more will also eliminate the possibility of forcing the mesh up.
How deep should a fence post be driven?
The general rule of thumb when setting a post is that the depth of the post’s hole needs to be one-third to one-half of the actual above-ground height of the post. So, a six-foot-high finished post ideally needs to be buried three feet into the ground.
Is driving posts better than concrete fence?
Can you put dry concrete in a post hole?
How to Set Posts in Concrete (without mixing) – YouTube
How deep do t post need to be?
Who gets the good side of the fence?
The finished side should face toward your neighbor. Not only is this more polite, but it’s the standard. Your property will look a lot nicer with the “good” side facing the outside world. Otherwise, your fence will look like it was installed backward.