What is Froglube used for?
FrogLube is an anti-oxidant, which means it helps prevent rusting of all metal surfaces, so it’s a great treatment for all tools and other metal surfaces, especially those subject to friction and requiring lubrication.
What is Froglube made of?
They discovered that Froglube is coconut oil plus a small amount of additives. Aside from the obvious Froglube smell, forum users speculate it also contains additives to prevent the oil from solidifying in cooler weather. Coconut oil has a relatively high melting point of 76 degrees (24 celcius).
Is Frog Lube good for guns?
Frog Lube is great, but only if used the right way. When you get a new gun, or start out with Frog Lube it is best to use their spray solvent to completely clean the gun and remove any traces of petroleum based lubes.
Does FrogLube remove rust?
Apply drops or wipe on the surface as needed. Scrub if dirty, wipe off excess. The lube will remove carbon and rust.
Does FrogLube remove copper?
FrogLube cleaners have been specifically formulated to clean copper fouling, but even more impressive, is that they are designed to work in tandem with FrogLube lubricants. The lubricants form a protective barrier to copper build-ups and the cleaners remove the ‘excess’ copper as displayed in this 150 round test.
Is FrogLube extreme a CLP?
FrogLube Extreme CLP Bio-Based Cleaner Lubricant Preservative 1.5oz.
What is FrogLube solvent?
FrogLube is a cleaner, lubricant, and protectant (CLP).
Is FrogLube petroleum based?
FrogLube has replaced petroleum in the firearm operating continuum. Experimenting with Non-petroleum, Bio-based mixtures, FrogLube discovered the following shocking results during firearm testing: No burning. Cleans carbon, metals, fouling, lube, copper & lead.
What is the best copper solvent for gun cleaning?
Best for Copper Fouling: Barnes CR-10
Barnes CR-10 is one of the best gun cleaning solvents for removing copper fouling. This aggressive ammonia based solvent quickly breaks down and loosens fouling left by copper or copper coated ammunition, but it also comes with an aggressive smell.
Does FrogLube prevent rust?
This also applies to other loose fouling particles such as dirt, dust, and sand. FrogLube does not film, nor is it a coating. Instead, it is a treatment that is absorbed throughout the firearm. It is water-insoluble and will repel water and resist corrosion.
What gun cleaner does the military use?
CLP
Currently, when cleaning a weapon, warfighters use a conventional wet lubricant known as CLP (cleaner, lubricant, and preservative) that is continuously reapplied.
Does Hoppes 9 remove copper?
Hoppe’s No. 9 Bench Rest Solvent is an order of magnitude above Hoppe’s original No. 9 in removing copper fouling, and also takes care of all the other crud normally found in a bore.
What is the best gun oil to prevent rust?
Best Gun Oil to Prevent Rust: Break Free CLP
Since CLP is designed to clean, lubricate, and protect guns, it’ll take on any and all issues that rust may present. It’ll clean them to remove rust; it’ll lubricate them to prevent any function issues caused by rust; and it’ll protect them from rust in the future.
Should you oil the inside of a gun barrel?
Improper care of your rifle, shotgun, pistol, or other firearms may result in it malfunctioning and/or rusting. While cleaning the outside of a gun is routine knowledge among gun owners, you’re not alone in asking, “Should I oil the inside of my gun barrel?” The answer is, yes, but make sure you’re doing it correctly.
Does the military still use CLP?
Currently, when cleaning a weapon, warfighters use a conventional wet lubricant known as CLP (cleaner, lubricant, and preservative) that is continuously reapplied.
Does Hoppes 9 expire?
Answer: There is no expiration date on the bottle.
How long can a gun go without cleaning?
A gun can typically go about 6 months without cleaning if it is not being used regularly. If you use it frequently you will need to make a judgment call. Of course, anytime there is any potential for moisture coming in contact with the gun you should clean it before storing it away.
What gun oil does the military use?
RADCOLUBE CLP
Radco Industries has been supplying the U.S. Military with critical application fluids since 2002. Our RADCOLUBE CLP (GUN OIL) is currently being used in combat operations by the U.S. Military.
Is it OK to use wd40 on a gun?
WD-40 is NOT a protectant, cleaner, nor lubricant and should NOT be used on firearms.
Do you clean your gun every time you shoot?
As a general rule, it’s a good idea to clean your gun after every trip to the shooting range. Defensive firearms that don’t get used very frequently should also be cleaned on occasion. Try to give them a deep clean and inspection about once a month.
Can CLP be used as gun oil?
CLP is a product that performs like it says. It cleans, lubricates and protects. It is primarily used on metal firearm parts but also can be used satisfactorily on any metal tools, etc.
What brand of CLP does the military use?
Radco Industries has been supplying the U.S. Military with critical application fluids since 2002. Our RADCOLUBE CLP (GUN OIL) is currently being used in combat operations by the U.S. Military.
Does Hoppes 9 remove carbon?
Trusted throughout the years, Hoppe’s No. 9 Gun Bore Cleaner can be used to clean all pistol, rifle, and shotgun bores and penetrates deeply to remove carbon, powder, and lead fouling. It also loosens abrasive debris to prevent wear and tear on your firearm.
Does Hoppes 9 lubricating oil prevent rust?
Hoppe’s No. 9 Synthetic Blend Lubricating Oil: Formulated with synthetic additives, this oil protects your modern firearms from corrosion and rust.
Is it OK to clean guns with WD40?
Since WD-40 is primarily a solvent it seems to make sense that it would be ideal for cleaning guns. However, cleaning your guns with WD40 is NOT advisable. Solvents, such as WD40, don’t remove any gunk or slime. Solvents dissolve gunk, which then moves the dissolved goo to another area of your gun that you cannot see.