What is Ont password?

What is Ont password?

The default user name and password for common users are Epuser and userEp, respectively. The default user name and password for common users are: V300R016C10 and before: root and admin, respectively.

How do I log into Huawei ont?

Log in to the web configuration page.

1. Open a browser. In the address bar, enter the web address (printed on the nameplate of the Huawei ONT). Press Enter.
2. Enter the login user name and password (printed on the nameplate of the Huawei ONT). Click Log In.

How do I reset my hg8145v5?

You need to hold down the button for 10 seconds to reset the device. If you cannot log in to the local PC, use any of the following methods: 1. Press and hold this button for more than 10 seconds to restore the device to its factory settings.

How do I access my Huawei fibre router?

Open your Internet browser and enter the device’s IP address to access the router. Enter 192.168. 3.1 in the browser search bar….The next page will require you to set your Wi-Fi network name & password.

1. Activate ‘Priortitze 5 GHz’.
2. Enter your desired WiFi network name and WiFi network password.
3. Select ‘Next’.

What is ONT IP address?

The ONT device uses a default IP address, 192.168. 1.1, with a subnet of /24.

What is Huawei default PIN?

If you forgot the SIM lock on your Huawei phone, the default PIN code is 1234 which is provided by T-Mobile.

How do I factory reset my hg8145v?

To perform a factory reset, please follow Below steps.

1. Power on the Huawei Router, place a paper clip or Pin into the hole on the back of the Router labeled Reset.
2. Hold paper clip or pin down for 10 to 15 seconds and release.
3. The Router will reboot on its own.

What is Huawei router IP address?

The router’s default IP address is 192.168. Connect your computer or phone to your router’s Wi-Fi network.

Does my ONT have an IP address?

The ONT is a layer 2 device, only data links your home network to Verizon’s network. All layer 2 devices are not required to have an IP address.

How do I reset my Huawei admin password?

Change the login password

1. Connect your computer to the CPE’s Wi-Fi (or to the CPE’s LAN port using an Ethernet cable). Enter 192.168.
2. Go to Advanced > System > Modify Password, enter the Current password, New password, and Confirm password, and click Save.

Can ONT reset?

To do a simple reset on your ONT, please perform a power cycle where you power the ONT off and wait about 5 minutes for its internal cache to clear.

How do I configure the ONT service profile (hg8240/hg8245)?

Parameter values vary with terminal types. Assume that the HG8240 or HG8245 is used. Set the parameters as follows: l Set Name to srvprofile-gpon. l Set Number of Pots Ports to 2. l Set Number of ETH Ports to 4. Figure 4-12 shows how to configure the ONT service profile (HG8240/HG8245).

What is the hg8240/hg8245/hg8247?

The HG8240/HG8245/HG8247 is an indoor optical network terminal (ONT) designed for home users and small office and home office (SOHO) users. Its upper shell adopts the natural heat dissipation material, and its optical port adopts the dust-proof design with a rubber plug.

How do I connect my hg8240h to Openserve?

Do not try to log into the HG8240H GPON Terminal. Connect your wireless router’s WAN port to port 1 on the Huawei HG8240H. Log in to your wireless router. Setup a PPPoE connection, using your ISP username and password. This should then allow you to connect to your ISP network via the Openserve fibre router. Click to expand…

How do I connect the hg8240h GPON terminal to my router?

Do not try to log into the HG8240H GPON Terminal. Connect your wireless router’s WAN port to port 1 on the Huawei HG8240H. Log in to your wireless router. Setup a PPPoE connection, using your ISP username and password.