What is sp20 PAG oil?

What is sp20 PAG oil?

Planetelf PAG SP 20 is a folyalkylene glycol lubricant (PAG) specially formulated for car air conditionning compressors using R134a as refrigerant. Planetelf PAG SP 20 is a high viscosity PAG oil for fixed displacement compressors, where SANDEN SP 20 is recommended.

Is there a universal PAG oil?

Universal PAG oil can be used in most applications. Always refer to your vehicle manual to determine the correct oil for your vehicle.

What can I use instead of PAG oil?

Polyalphaolefin (PAO) oil

Polyalphaolefin (PAO) oil can be used as a replacement for some PAG oils, and is sometimes preferred because it doesn’t absorb moisture from the air like other oils do.

What kind of oil is PAG oil?

synthetic oil
PAG is actually an acronym for Polyalkylene Glycol, and it is a synthetic oil used in A/C systems to lubricate the compressor. Most all newer model cars use PAG as the lubricant in the A/C system. When people refer to PAG oil they typically refer to it in the following terms: PAG 46, PAG 100, or PAG 150.

How much refrigerant oil should I add?

An average car might use a bit of oil (4 oz. ) and two cans of refrigerant R-134a (12 oz.)
…
Application of Adequate Amount of Lubricant in Different Cases of Compressor.

Is PAG 46 and PAG 100 Compatible?

Vehicle and manufacturer-specific information must therefore be observed accordingly. ➔ PAG oils are highly miscible with R134a (PAG oils 46 YF and 100 YF also with R1234yf) and are suitable for lubricating the air conditioning systems of most passenger and commercial vehicles.

Is it OK to mix PAG oils?

The two oils do not mix completely and cannot create a long-lasting homogenous mixture, which is needed to ensure the correct lubrication of the mechanical parts within the compressor.

Are all PAG oils the same?

PAG oils are harsher than mineral oils, and may cause skin irritation and damage O-rings and seals. There are different viscosities of PAG oil being used by OEMs: PAG 46, which is the most popular; PAG 100, which is also common; and PAG 150, which is more rarely used.

Can I use ATF for compressor oil?

Compressors can produce a lot of heat when running, so ATF can ensure the compressor works efficiently without any shutdowns due to overheating. However, most ATFs do not work with compressors and may even cause damage.

What kind of oil do you use with R134a?

polyolester oil
You will find the R134A refrigerant (tetrafluoroethane or R134A is an HCF refrigerant) in a lot of car air conditioning systems. The best type of oil for R134A system is polyolester oil (POE). Alternatively, you can also use polyalpha olefin (PAO).

Is all PAG oil the same?

Can you mix different PAG oils?

What happens if you add too much PAG oil?

If you add too much oil to the system, it may pool in various places of the system and can coat the inner walls of the evaporator and condenser coils. This will diminish their ability to absorb or dissipate heat, thereby bringing down the overall cooling performance.

How much PAG oil do I add to a new compressor?

Lets add oil back to the new compressor in an amount equal to the amount drained from the old compressor. 3 oz. Old Compressor 2 oz. Old Dryer 5 oz needed in new compressor Typically you’ll want to change the receiver dryer along with the compressor.

What oil is used with 134a refrigerant?

PAG oil
The best type of oil for R134A system is polyolester oil (POE). Alternatively, you can also use polyalpha olefin (PAO). It is essential that you don’t use mineral oil, PAG oil, or ABK oil with R134A refrigerant. Mineral oil is less hygroscopic than POE oil, for example.

Can you mix PAG 46 and PAG 100 oil?

➔ PAG oils are highly miscible with R134a (PAG oils 46 YF and 100 YF also with R1234yf) and are suitable for lubricating the air conditioning systems of most passenger and commercial vehicles.

Which oil is best for air compressor?

There are two main types of compressor oil: standard oil (also called mineral oil) and synthetic oil. Standard (Mineral) Compressor Oil. Standard compressor oil is made by using a mineral base and are cheaper than synthetic compressor oil. Mineral oil is more volatile and is more likely to evaporate than synthetic oil.

What oil should I use in my air compressor?

Most compressors use SAE 30 or SAE 20 oil. The former is ideal for warmer temperatures, while the latter is better for colder temperatures (SAE 20 is thinner, so makes startup easier in cold environments).

Does R134a have PAG oil in it?

Summary: PAG Oil is used on R-134a systems from about 1995-2015.

What is the difference in PAG oils?

what is the differance between ester and pag oils fo air conditioners and which one applies to what vehicle? As a general rule, ester oils are only currently used with R12 or retrofitted AC systems. PAG, in various viscosities, is the recommended refrigerant oil for most R134a vehicles since the mid-nineties.

Does vacuum remove PAG oil?

Now that I’ve learned that the vacuum typically will not remove the PAG oil, I have a better understanding of what is going on.

How do I check my PAG oil level?

How to easily check your car A/C system for lubrication – YouTube

Should I add PAG oil after vacuum?

Absolutely not. You don’t need to add any oil and there will be some oil in the refrigerant when you charge the system. Pull a good vacuum with a Micron gauge to 500 microns. This will ensure all the moisture is out of the system.

Can I use SAE 30 oil in my air compressor?

Can I use engine oil in air compressor?

While you could technically use motor oil to operate an air compressor, that oil type typically contains detergents which will cause carbon build-up within a compressor unit. Instead, oil manufacturers have created oil specifically for air compressors that don’t include detergents.