What is the difference between Nikon SB-900 and 910?
In the press release Nikon mentioned only two SB-910 improvements over the SB-900: the SB-910 provides more efficient battery usage as well as an enhanced Thermal Cut-Out function. the SB-910 uses new hard-type color compensation filters for fluorescent and incandescent color temperature balancing.
How do I reset my SB-900?
Now you know why Nikon pushes wireless flash. With all the ways you can screw up the settings, it’s a Godsend that you can reset the SB-900 to where yo need it simply by holding both green buttons. The 17-200mm zoom range is a crock.
Does the Nikon SB-800 have high speed sync?
Nikon has today announced the new SB-800 Speedlight. This new flash unit is designed to complement the D2H digital SLR and incorporates many new features associated with Nikon’s i-TTL ‘Creative Lighting System’ including Flash Value Lock, Auto FP High-Speed Sync and Flash Colour Information Communication.
How many watts is the Nikon SB-800?
SB-800 C is 1400 uf, and V is 325 volts, which computes 74 watt seconds. (tolerances are not tight on this).
How do I setup my Nikon Speedlight?
How to setup a Nikon Flash gun (Speedlight) & DSLR via – YouTube
How do I flash my SB 900 remote?
Here’s how to do it.
- Press the “OK” button until you see a custom function menu appear. Should take a couple of seconds.
- Using the command dial, scroll until you get to “SU-4” mode, and press “OK”.
- Use the same dial.
- Press “Exit” to get out of the menu.
- Set your selector switch to “Remote”.
Which Nikon supports high speed sync?
Using high speed sync mode with your Nikon DSLR (D7000 series and above) and Nikon Speedlight (SB-500 and up) allows you to synchronize the flash to shutter speeds all the way up to the highest speed the camera is capable of.
Is the Nikon SB-800 A good flash?
With the SB-800 Nikon is once again ahead of its competition when it comes to flash. The SB-800 is Nikon’s top of the line flash, which fully supports Nikon Creative Lighting System (CLS) (when used with compatible camera bodies and lenses).
What does SB mean on flash?
does the SB stand for? Thats the flash ready indicator. If it’s solid red, the flash is ready and will be used on the next exposure. If it’s blinking, the flash is still recycling from the last time it fired and needs a bit more time before it’s up to it’s full output level.
When did the Nikon SB-800 come out?
22 July 2003
The SB-800 was announced 22 July 2003. It was Nikon’s best flash until the complex SB-900 arrived in 2008. THe SB-800 works with every Nikon camera made for the past 40 years. It’s the only flash, along with the almost identical SB-600, that works properly with the D70 and the new i-TTL exposure system.
Should I use TTL or manual flash?
Using TTL automatically adjusts the flash output for you as the distance between you and the camera changes. Manual flash is best in scenarios where you want the most control over the light source. It’s also useful if the distance between the subject and the flash doesn’t change rapidly.
What is TTL in flash photography?
TTL means Through The Lens metering. When you focus your camera with that half push of the shutter, your camera is not only focusing, but its taking a reading (metering) of the scene. It is taking a measurement of how much ambient light is being returned Through The Lens to the sensor.
How do you use the Nikon Speedlight?
Nikon Learn & Explore – The Basics of Flash Photography – YouTube
How important is high speed sync?
High-Speed Sync (HSS) allows you to use your flash at a shutter speed that goes above 1/200 of a second, which is a normal flash sync speed on most digital cameras. HSS allows you to set the exposure for a dramatic sky and still get a good exposure on the model as well.
Does ISO matter with flash?
ISO Affects Flash And Ambient Equally
The ISO setting affects the “volume” of the signal coming from the digital sensor. It does not distinguish between flash and ambient light.
When did the Nikon SB-900 come out?
(GN 111 ft, 34 m @ 35 mm) SB-900 is a larger professional model released 30 June 2008, weighs approximately 415 g. It is a flash made by Nikon for their digital and film single-lens reflex cameras, released on June 30, 2008.
When did the Nikon SB 900 come out?
What is TTL mode Nikon?
The best part is that Nikon Speedlights are really easy to use, with a full automatic mode, called i-TTL, or Intelligent-Through-The-Lens metering. This means that the camera and flash will communicate with each other and figure out the best exposure that will balance both the subject and the ambient light.
Do I really need a TTL flash?
So is TTL flash necessary? The simple answer is yes. If you’re running and gunning all the time, you don’t want to be fidgeting with your Speedlite. TTL changes the flash output for you.
Does TTL use more battery?
Con: TTL Can Drain the Battery
While those pre-flashes are low power and nearly instantaneous, they do require some power, which means over time they’ll contribute to faster battery drain.
Is it better to use TTL or manual flash?
What is I TTL flash for Nikon?
What is TTL flash mean?
Through The Lens metering
TTL means Through The Lens metering. When you focus your camera with that half push of the shutter, your camera is not only focusing, but its taking a reading (metering) of the scene. It is taking a measurement of how much ambient light is being returned Through The Lens to the sensor.
When should you shoot high speed sync?
High-speed sync flash is used when you want to use a shutter speed that is faster than your camera’s native flash sync speed, or when you want to use a wider aperture setting that requires a higher shutter speed as is often the case with outdoor daylight shooting.
Why my shutter speed is 1 60 when I use a flash?
You’re probably set up for fill-flash, where the camera exposes for ambient light and the flash fires to fill in the shadows. So that’s going to default to a slow shutter speed.