What should IntelliChlor be set at?
The IntelliChlor SCG is designed only to produce chlorine. The IntelliChlor SCG does not monitor or control chlorine levels in the pool or spa water. It is the pool ownerʼs responsibility for monitoring and maintaining free chlorine levels at the APSP recommended range of 2.0 to 4.0 parts per million (ppm).
How do I know if my Pentair salt cell is working?
The easiest way to ascertain if the chlorinator is working is to make sure the cell is clean by checking the needle or production lights. Ensure there is enough salt in the pool. On the chlorinator box there should be a light or dial that indicates it is working.
How often do you clean IntelliChlor?
The IntelliChlor and iChlor Electrolytic Cell must be acid cleaned if excessive scale forms between the plates or debris is present. For more information about cleaning the electrolytic cell, refer to the IntelliChlor User’s Guide (P/N 520589) or iChlor Installation and User’s Guide (P/N 522709). 1.
Why is my IntelliChlor not producing chlorine?
Water flow
The saltwater chlorinator needs a sufficient flow of water for effective operation. A dirty skimmer basket, clogged or dirty filter, and a clogged pump strainer, can cause insufficient water flow for the chlorinator to produce less chlorine.
What should the salt level be for Pentair Intellichlor?
What should the salt level be? The intellichlor is set to function when the salt level is between 2800 ppm and 4500 ppm. Too little, it cannot make chlorine. Too much salt and it also cannot (should not) make chlorine and can cause additional voltage issues with your pool and equipment.
How long do I run my salt chlorinator?
On average, most pools will need the saltwater generator to be on 8-12 hours per day. This will produce adequate levels of chlorine to properly sanitize the pool’s water.
How do I know if my Pentair salt cell needs replacing?
That said, here are solid indications the salt cell likely needs cleaning, repair, or replacement:
- The power center displays a Check Salt message.
- The Cell Warning light displays consistently, shutting off for only a short while after cleaning.
- The voltage is higher than normal.
How do I reset my Intellichlor salt cell?
Press the “More” button to cycle through each salt level, and then press the “Less” button to choose and save the display as the new salt level. The “PWR”, “Cell”, “Life”, and “Flow” lights will flash 4 times, then the mode exits to normal.
How do I know if my salt cell needs to be cleaned?
Saltwater cells should be cleaned when they have significant calcium scale buildup on them. This can take anything from 2 months to 3-4 years. Salt cell systems are usually designed with “clean cell” or “check cell” warning lights, which are an indication that the cell may need cleaning.
How do I know if my salt cell needs cleaning?
How long does it take a salt cell to make chlorine?
If you have your system set on 50% capacity and your pool pump is set to run 8 hours per day, then your salt cell will produce chlorine for 50% of that time – or 4 hours.
How long does a Pentair salt cell last?
They are good for about 10000 hours. They do let you know when they are at the end of life with a series of lights.
How often does intellichlor check salt level?
The salt level is checked daily and is displayed on this section of the unit. Green: Good salt. The water salt level is above 2900 ppm, the cell will produce chlorine. Flash green: Salt is above 4000 ppm.
How long should I run my salt chlorinator in winter?
Let the pump run as long as it takes for the water to cycle through the circulation system. This is known as the turnover rate. Generally, pumps need to be run for 6 to 8 hours at a time for proper circulation.
Is it OK to run pool pump 24 hours a day?
Some commercial properties require 24-hour a day pump circulation, but as a homeowner, this is not advisable. If you are lucky enough to own an Energy Efficient, Variable Speed swimming pool pump (VSP) then , yes, technically you could run your pump for 24 hours a day.
How long does a Pentair Intellichlor last?
about 10000 hours
They are good for about 10000 hours. They do let you know when they are at the end of life with a series of lights.
How much does it cost to replace a salt cell?
between $700 and $1,100
When it’s time to replace your salt chlorine generator cell, you can expect to pay between $700 and $1,100 for a new one. Most people find that they need to replace their cell every 3-7 years, depending on the quality of the salt used and how well they maintain their pool.
What should my Pentair salt cell be set at?
Can I use vinegar to clean my salt cell?
How to Clean your Pool Salt Cell with 5% Distilled White Vinegar – YouTube
How often should I clean my Pentair salt cell?
Most salt cells will need cleaning at least twice a year. Some may need it as often as every two months.
How many hours a day should you run a salt water pool pump?
Your pool system including chlorine generator should be operated often enough to completely turn your pool water over at least every 12 hours or twice a day.
How many years does a salt cell last?
about five years
This is all possible thanks to your pool’s salt chlorine generator cell. With proper care, a cell will last about five years. Eventually, though, it will need to be replaced. The trick is, it’s not always easy to know when it’s time.
How long does Pentair Intellichlor salt cell last?
How do I know if my salt cell needs replacing?
What Are Some Signs That Your Salt Cell May Need Replacing?
- Looking worse for wear, it’s lost a few plates and the acid baths just aren’t working.
- Your pool is starting to turn green or cloudy, even though your chlorinator is turned up to 100%.
What temperature should I keep my pool at?
between 77-82°F.
Despite this, the average pool temperature, which is said to be ideal for all, is between 77-82°F. These temperatures are low enough to prevent bacteria from growing, but also warm enough to take the chill off.