Why are some of my DStv channels not working?
If some channels are not playing on DStv, your decoder is not receiving enough signal strength to play them out. The signal strength and quality are low because of the misalignment of your dish. In some cases, poor signal quality results from misaligned LNB also.
How do I refresh my DStv decoder?
Simply press and hold the standby button on the remote. Remember to keep your smart card inserted. Throughout the reboot process or the decoder will be unable to reboot promptly.
What causes DStv to lose signal on some channels?
The reason your DStv says no signal is because there is an error in the DStv installation. This is caused by either a misaligned satellite dish, a faulty LNB, an improperly connected F-connector plug, loose cables or incorrect decoder settings on the LNB type.
Why some channels are not working?
First check that your TV is set to the correct Source or Input, try changing the Source or Input to AV, TV, Digital TV or DTV if you haven’t already. If your “No Signal” message is not due to incorrect Source or Input being selected, then it’s most likely caused by a set up or antenna fault.
How do I resolve DStv issues?
Here are steps to follow:
- Visit the www.dstv.com self service portal.
- Click Fix Errors.
- Enter your surname or mobile number and DStv smartcard number.
- Click on Sign in.
- Click Fix Errors.
- Enter your DStv smartcard number in the dialogue box provided.
- Select the DStv reset code “E16” from the displayed error codes.
What happens when you reset your DStv decoder?
What Happens When You Reset Your DStv Decoder? When you reset your DStv decoder, all the previous setup on your receiver are restored to the default settings. This means if you have made any changes to your decoder menu, then all those settings will be deleted and restored to the factory settings.
How do I know if my DStv LNB is faulty?
Check LNB cable for damage
Indeed, you need to switch off the satellite receiver and turn it on again after waiting for 30 or more seconds. If there are no signals even after restarting the receiver, you need to check your LNB cable. Importantly, if the cable is not damaged, check the LNB connection.
How do you fix my TV when it says no signal?
No Signal on TV – Fix it Now – YouTube
Why have I lost some of my TV channels?
It’s normal that the digital signals for the channels you have lost were stronger when you initially scanned than it is currently. There are several reasons why this could happen, including weather conditions, electrical interference, weak signal, and atmospheric pressure.
How do I get my TV channels back?
Press the “Menu” button on your remote control. If you don’t have a remote, your TV should have a built-in “Menu” button. Find and select the “Channel Scan” option in your TV’s menu. This option is sometimes labeled “Rescan,” “Tune,” or “Auto-tune.”
How do I restore missing channels on DStv?
How to Load Missing DSTV channels after scan – YouTube
What causes the DStv to lose signal?
Why your DStv says no signal? The reason your DStv says no signal is because there is an error in the DStv installation. This is caused by either a misaligned satellite dish, a faulty LNB, an improperly connected F-connector plug, loose cables or incorrect decoder settings on the LNB type.
How do I restore my DStv now channels?
One of the ways you can restore your channels is by rescanning your DStv decoder. Click on the quick setup option and begin the process. Many professionals advise you to use the manual setup process since it will give you more control, and you can select some aspects of the process you want.
How do you check if your LNB is working?
Read the signal level on the signal meter. Displays vary by signal meter type, including dial displays, LED signal level indicators and LCD digital read-outs. No signal or a low signal strength/quality reading indicates that the LNB is not functioning correctly and you will need to replace the device.
Why has my TV suddenly lost signal?
Check the cable connections between the TV and your video device or receiver. Change the channel or try a different input device or movie. The received signal may be weak. If your TV uses a cable or satellite box, you may need to contact your service provider for further assistance in improving the signal strength.
Why did one of my channels disappear?
Your TV channels might be disappearing because of a poor strength signal, or it can also be caused by a faulty receiver, especially in the case of cable TV. Keep reading to find out how to fix your TV and get your missing channels back on both antenna-based TVs and cable TVs.
Why has my TV suddenly lost all channels?
Why do TV channels disappear?
Why is my DStv channels blocked?
If you want to watch a channel on your DStv decoder and get a PG blocked response, it means parental control block has been put on that channel, and you can only watch if you unblock that channel. See this: How To Rescan Your DStv Decoder.
How do I activate DStv channels?
How To Activate & Create Account For Your New DStv Decoder
- Make sure you have checked your DStv smart card or IUC number.
- Write down the decoder serial number.
- Now, switch on your DStv decoder.
- Scan your DStv decoder to get all the channels.
- After scanning your DStv Digibox, you will see channel 100 working.
How do I know if my LNB cable is faulty?
LNBs can degrade over time, particularly in locations exposed to extreme weather conditions; signs of a faulty LNB include missing channels, video pixilation, signal drop-out during heavy rain or a complete loss of signal.
How can I fix my DStv signal?
How To Fix Signal Strength On DStv?
- Try rebooting the decoder.
- Check F-type connectors.
- Correct the LNB alignment.
- Adjust satellite dish alignment.
- Replace a faulty LNB.
- Move your satellite dish.
- Cut down or prune trees that may obstruct the signal.
How do I rescan TV channels?
Press “set-up” or “menu” on the TV remote control or converter box. Select “channels,” “antenna,” or other similar terminology. Click “scan,” “auto-tune,” “channel search,” “auto-program,” or other similar terminology. The TV will do the rest.
Why is my auto scan not finding channels?
First, check the obvious. Make sure you are plugging the cable into the correct antenna socket on the SKIPPA (the one marked IN). Also make sure that the other end of the cable is plugged into an antenna wall socket and not your TV.