Can belzona be used on plastic?
Applications for Belzona 1211 (E-Metal) include:
Repair of damaged shafts and hydraulic rams. Repair of plastic and metal joints.
What is belzona used for?
Repair of cracks and holes on engine and pump casings, pipes, tanks and other equipment. Resurface of pitted metal surfaces. Repair of damaged shafts and hydraulic rams.
What is belzona epoxy?
Belzona 1311 (Ceramic R-Metal) A 2-part epoxy-based repair composite designed for metal repair and protection against the effects of erosion and corrosion. This solvent-free repair composite has excellent chemical resistance and will bond to all metals and most other rigid surfaces.
How do I apply Belzona 1511?
a) Apply the Belzona® 1511 directly on to the prepared surface with the plastic applicator or spatula provided. b) Press down firmly to fill all cracks, remove entrapped air, and ensure maximum contact with the surface. c) Contour the Belzona® 1511 to the correct profile with the plastic applicator.
How long does belzona last?
In fact, Belzona repairs can last for 20 or more years depending on service conditions and have been known to outlast the original design life of the shaft. Equipment commonly suffering from mechanical damage.
How strong is belzona?
The bonding strength of Belzona 5811 has been measured by a tensile shear adhesion test. In the case of bonding a 1m2 plate, the results demonstrate that Belzona 5811 will be able to sustain up to 7000kN in pure shear. An equivalent 7mm weld along the edges of the plate will be able to support up to 2000kN.
What temperature is Belzona 1111 Good For?
Store between 5°C (41°F) and 30°C (86°F) unless otherwise stated in a dry, well ventilated place away from sources of heat, ignition and direct sunlight. No smoking.
What temperature is belzona good for?
This high temperature repair system is designed for metal repair and rebuilding equipment and provides excellent corrosion protection. Under immersion, Belzona 1511 (Super HT-Metal) is suitable for applications up to 150 °C (302 °F).
How long does it take for Belzona 1111 to cure?
2 – 4 hours
The mechanical properties, heat resistance and chemical resistance of Belzona® 1111 will be improved by post curing. After 2 – 4 hours of applying Belzona® 1111, post cure the material using forced air heaters, heat lamps, etc. for a mini- mum of 4 hours at 140-212°F (60-100°C).
Is belzona heat resistant?
A 2-part hand-applied epoxy coating designed to provide long-term corrosion and chemical resistance to equipment operating in continuous immersion at temperatures up to 160°C (320°F).