Does ToyTec install lifts?
We do have a large dealer network and can help you find a shop for installation in your area.
How do you lift a 5th generation 4Runner?
Side so we’re going to take our 14 millimeter wrench first and just secure it down here on the bottom. So that doesn’t want to spin then we’re going to take our 12 millimeter on the top.
Are ToyTec coilovers rebuildable?
Toytec “Aluma” shock absorbers and coilovers are rebuildable shocks. They carry a 1 year warranty against any manufacturer’s defects. If a shock fails within the initial year of ownership, the shock must be shipped back for inspection and service.
Does Toyota make a lift kit for 4Runner?
Push your vehicle’s capabilities even further with a Toyota 4Runner lift kit.
How do you adjust the Toytec ultimate lift?
Spray the adjustment collar and the threads on the coilover body with WD-40. This will help the collar move more freely. counter clockwise to raise your vehicle. If you are unable to turn the upper adjustment collar, a helper bar/pipe can be slipped over the end of the spanner wrench to gain more leverage.
How do you adjust Toytec struts?
Turn the preload ring COUNTER-CLOCKWISE (looking downward on the coilover) to unscrew it away from the springs to REDUCE THE PRELOAD (decrease ride height). Turn the preload ring CLOCKWISE (looking downward on the coilover) to screw it in toward the spring to INCREASE THE PRELOAD (increase ride height).
Do you need new control arms for a 3 inch lift 4Runner?
No, aftermarket up control arms are not required on 03-19 Toyota 4Runner. The 4Runner UCA’s provide enough alignment adjustment to set the vehicle within the factory alignment spec range.
Can I lift a 4Runner with KDSS?
Can you lift 4Runners with KDSS? KDSS equipped 4Runners can be lifted, however there are two common issues: KDSS lean and poor ride quality. Based on the limitations of the KDSS system we recommend lifting KDSS equipped 4Runners a maximum of 2.5” in front and 1” in rear.
Who makes ToyTec?
DPI Off-Road Brands has acquired ToyTec Lifts, the company announced. ToyTec Lifts, a developer and manufacturer of Toyota lift kits, was founded in 2004 in Denver, Colorado. ToyTec produces new products ranging from front coil overs, rear lift shackles and shock extenders, to rear LCA skids and coil springs.
Does lifting 4Runner void warranty?
The installation of a lift will not Void your 4Runner’s warranty. Coverage on any part that is proven to be damaged as the result of a lift or any condition caused by the install of a lift can be denied for coverage though.
How do you adjust coilover stiffness?
How To Adjust Coilovers | A Coilover Adjustment Guide – YouTube
How do you adjust height on Toytec coilovers?
Do I need upper control arms for a lift kit 4Runner?
All Toyota 4Runner models have independent front suspension and require replacement of factory upper control arms when lifted.
Do you need new UCA for 3 Lift?
Rule of thumb is getting above 2 or 2.5 inches puts you to needing new UCA’s for a proper alignment.
How do I deactivate KDSS?
For vehicles with KDSS – Locate the KDSS Shutter Control Valve (located mid-vehicle on the left side frame rail). Loosen both screws 3 full turns to deactivate the KDSS system before raising the front end.
How do I turn off KDSS?
Take the factory connector on the harness and plug it back into the KDSS module. The KDSS light will turn off. This is only to test your unit. If the KDSS light does not turn off, you may have a faulty unit.
Does Bilstein make lift kits?
We have teamed up with Bilstein, combing both our suspension expertise to create a range of reliable, comfortable, yet heavy duty 4×4 lift kits. Our Bilstein Lift kits are each designed and assembled for specific applications, all our lift kits are modifiable for specific vehicle use.
Does 2014 4Runner Limited have Kdss?
Vehicles. Models that have adopted the Kinetic Dynamic Suspension System to date include: 2010–2016 Toyota 4Runner Trail Edition.
Does aftermarket lift void Toyota warranty?
A lift kit will not void a Toyota warranty, but the parts that are modified will not be covered under warranty if you lift your Toyota vehicle more than two inches. A lift kit is designed to raise the suspension of your vehicle higher than what’s recommended by the factory that built your Toyota.
What voids a Toyota warranty?
Installation of Race or Off-Highway Use Parts may adversely affect the warranty coverage on your vehicle. The addition of Race or Off-Highway Use Parts on a vehicle is not covered by the vehicle warranty and any failure that they may cause is also not covered by the vehicle warranty.
Why do my coilovers feel bouncy?
bouncy either means too much dampening (car is going up and down over every bump) OR not enough dampening (car is not composed and jumps around). best to use the middle setting on your dampers and then either go up or down in small increments.
Do coilovers give a smooth ride?
Absolutely not. Since most coilovers are also going to allow you to lower the ride height, the spring and shock rate should be increased to avoid the suspension crashing and bottoming out. Doing so will offer a performance bump to most any vehicle.
How do you adjust Toytec boss coilovers?
- down to gain desired lift height. Looking down the coilover body, turn the upper collar clockwise to lower or counter clockwise to.
- raise your vehicle.
- BOSS Front Coilovers –Adjust the collar either up or down to gain desired lift height.
- upper collar clockwise to lower or counter clockwise to raise your vehicle.
Do you need new control arms for a 2 inch lift 4Runner?
Do I need UCA with 2 inch lift?
You don’t need the UCA. I did the 2.5” MotoFab level kit and worked great without issues.