How do I find the value of my outboard motor?

How do I find the value of my outboard motor?

Contact used outboard dealers in your area and ask if they can tell you a value for your motor. Some may only provide a valuation if you are selling the motor to them directly while others may charge a fee or choose not to offer prices at all.

How do I find out what year my older Mercury outboard motor is?

Every Mercury outboard has a serial number label located on the transom bracket area of the engine. The latest serial number labels display a 2-digit number in a box at the lower right portion of the label. These digits coincide with the last two digits of the year in which the outboard was manufactured.

What is Mercury Marine Worth?

A new study estimates Mercury Marine is worth more than five billion dollars to Fond du Lac.

How do I know what model outboard I have?

And over here on the port side you’re gonna see the tag we’re talking about sometimes that tag can be on the starboard side if you have an older two-stroke it may be covered in some sort of suit.

Are old outboards reliable?

The “good old” outboards—the ones that were built in the 1950s and later—are even better than those early, antique outboards. They are just as reliable, and a lot easier and cheaper to fix than state-of-the-art motors.

How much does a 350 hp outboard cost?

Mercury Marine 350XL Verado • $30,745

The 350 hp Verado, with supercharged torque that hits the instant you drop the digital throttle, unleashes pure marine muscle.

How do you tell what year an outboard motor is?

The serial number can help you determine the year of your engine. Your serial number or model number can be found on the engine’s mid-section. Often this plate is also marked with the engine’s year too.

How do I know if my Mercury outboard is 2 or 4 stroke?

Here are some easy ways to tell if your engine is two-cycle or four-cycle:

  1. Look at the fuel cap.
  2. Look for stickers labeling the equipment (e.g., “Four Cycle” or “No Fuel Mixing”).
  3. Look for an engine oil fill cap.
  4. The Operator’s Manual will have engine fuel and oil information in it.

How much is a Mercury 600hp worth?

$77,000
Retail pricing is said to be “in the $77,000 range.”

What Year Did Mercury start making 4-stroke outboards?

introduced their first four-stroke. outboards, in 9.9hp and 50hp. configurations.

What year is my boat motor?

Go to the motor and look on the motor’s swivel bracket for an embossed, metalized tag or plate that has the name of the motor’s manufacturer boldly stamped at its top. This manufacturer’s tag also shows the year the motor was built, or the model year on all motors except Honda. Lift the top cowling from the motor.

Will 2-stroke outboards be banned?

Two-stroke engines are not “banned” for use on all waterways in California, nor is there any plan to do so. Carbureted and electronic-injection two-stroke engines are considered high-emission engines.

What is the most dependable outboard motor?

Best Outboard Engines In 2021

  • Suzuki DF90A.
  • Yamaha F25.
  • Suzuki DF25A.
  • Mercury 90-150 FourStroke Lineup.
  • Mercury SeaPro 500HP.
  • Mercury Verado 600HP V12.
  • Torqeedo Deep Blue.
  • Yamaha V-Max SHO 115.

How much does a Mercury 400 hp outboard cost?

Mercury Marine 400XL Verado • $33,051
Created to power the largest boats for the boldest adventures, Verado delivers advanced engineering and refined operation to boat owners who don’t compromise; every feature is designed to deliver the ultimate on-water experience, greatest confidence and supreme comfort.

How do you tell the year of a boat motor by serial number?

  1. Locate the serial number on the mounting bracket of the outboard motor, or the silver plug on the top of the motor.
  2. Write the serial number down.
  3. Decipher the serial number using “INTRODUCES” as the key code.
  4. Locate the final three numbers to determine the year.

Where is the serial number on an old Mercury outboard?

For Mercury Outboard, your serial number will be located on a rectangular tag on the starboard (right) side of your motor on the transom mount. In engines 8HP and higher, the ESN is on starboard (right) side – halfway down the transom assembly, just below the engine’s powerhead.

When did Mercury stop making 2-strokes?

2005
Mercury actually quit building all of its traditional two-strokes, from 2.5 hp to 200 hp, following the 2005 model year.

How much does a 300 hp Mercury outboard cost?

Mercury Marine 300XL Pro XS • $25,994.

How much does a 400 horse Mercury outboard cost?

The Mercury Verado 400 will be available for shipping in the spring. In America, its price is expected to be about $ 35,000.

What year did Mercury stop making 2 strokes?

Mercury actually quit building all of its traditional two-strokes, from 2.5 hp to 200 hp, following the 2005 model year.

What lasts longer 2-stroke or 4-stroke?

Both engine types have their pros and cons, and the one that will work best for you depends on the needs of your application. While 4-stroke engines perform well and generally last longer than 2-stroke engines, 2-stroke engines are lighter and faster than 4-stroke engines.

How do you tell the year of a boat by its serial number?

How old is my boat? – Your HIN number explained ! – YouTube

Does anyone still make 2-stroke outboards?

Today, manufacturers like Mercury Marine have developed 4-stroke outboards that weigh and perform comparably with 2-storke outboards. And by using direct injection techniques, Mercury Marine is also making 2-stroke outboards that are as clean running, smooth and quiet as 4-stroke outboards.

Which is better Yamaha or Mercury outboard?

If you are interested in going green, then the Yamaha is a great choice. It offers two electric outboard motors, while Mercury currently offers none. If you are interested in a long-lasting warranty, Mercury might be the better choice because you can get an extended warranty for up to eight years.

Who sells the most outboard motors in the world?

Yamaha
Yamaha Yamaha is the global market leader with 40% market share and reported revenue of $2.6 Billion in Jan-Sep 2019 period, 4% up YOY.It has also said that sales of high margin 200hp outboard motors went up in US and well as Europe in 2019.

When was the last Johnson outboard motor made?

2007
It has been owned since 2001 by the Canadian firm Bombardier Recreational Products. Bombardier stopped selling outboards under the Johnson brand after 2007, and moved all sales entirely to Evinrude Outboard Motors until they were discontinued in June 2020.

How much does a 30 hp Johnson outboard weight?

Net weight of the motor only: 120 lbs.

How long do Johnson outboard motors last?

A typical estimate from the industry is that an outboards motor last around 1,500 hours of operation. Assuming the average owner uses their boat 200 hours a year, this would mean that the motor would last between seven and eight years.

How do you evaluate a used outboard motor?

Used boat buying checklist

  1. Check the condition of the transom. Make sure the wood where the outboard motor mounts on the boat is in good shape and isn’t rotten.
  2. Test the floor.
  3. Inspect the hull.
  4. Run the motor.
  5. Check the lower unit.
  6. Check motor tilt and trim.
  7. Check lights and other miscellaneous items.
  8. Look up the price.

What should I look for when buying a 2 stroke outboard?

Give the outboard motor a thorough visual inspection. Check out the cowl to make sure it’s undamaged and in good condition. If the cowl looks brand new, make sure to ask why. Inspect the propeller for damage and for debris around the shaft.

Are old Johnson outboards reliable?

“The Johnsons were by far the most reliable of all of the engines that we owned. They always started well, never, and I do mean never needed anything beyond routine maintenance…the 1976 70 hp Johnson I owned till last year, and it never gave problems.”

Can you still get parts for Johnson outboard motors?

To date, the company doesn’t manufacture outboards in the Johnson brand any longer. However, servicing and available parts can still be found and offered by reliable companies.

What is the lightest 30 hp 2 stroke outboard?

It has long been a Suzuki hallmark to engineer lightweight outboards, so in keeping with that, the DF30A is the lightest outboard in the 30hp class.

Who makes the lightest 30 hp outboard?

Mercury Marine introduces new 25 and 30hp four-stroke outboard platform – the lightest and fastest 3-cylinder engines in class.

How do you start an outboard that has been sitting for years?

Get some water to the engine via a garden hose. Then put on some ear muffs and let the water run for a couple of seconds. Prime up the fuel, turn the key, and hopefully, start and run the engine! If you are going to let the engine sit and run for a while, (which is a pretty good idea to do).

What should I look for in an old outboard motor?

7 TIPS FOR BUYING A USED OUTBOARD

  1. COMPRESSION TEST. Good compression generally means the rings and cylinder walls are in good order.
  2. RUN THE ENGINE.
  3. CHECK ENGINE OIL.
  4. CHECK THE GEARBOX OIL.
  5. CHECK TRIM AND TILT SEALS.
  6. CHECK SERVICE HISTORY.
  7. ENGINE HOURS.

Are Johnsons good motors?

They are very good engines. They are basically the same as the evinrude oceanPro engines produced through the 90’s. They are carbed 2 strokes that are pretty thirsty for gas and oil. However, if well maintained, they are very reliable.

How do you start an outboard motor after sitting for years?

What year is my Johnson outboard by model number?

To find out the year a Johnson Motor has been manufactured you have to look at the last three letters of the serial number. The last letter represents the model run, and the other two represent the year the motor has been manufactured.

Why did Johnson outboards go out of business?

Company president and CEO José Boisjoli said, “Our outboard engines business has been greatly impacted by COVID-19, obliging us to discontinue production of our outboard motors immediately. This business segment had already been facing some challenges and the impact from the current context has forced our hand.”

How much fuel does a 30HP outboard use?

Maximum output: 30HP (22.1 KW) Maximum operation range: 5250-6250 rpm. Fuel Consumption at W.O.T: 10.4 L/Hr.

How much does a 30 hp 2 stroke outboard weight?

51.0 Kg (112 lbs.)

How much is a 30 hp Honda outboard?

Our Price: $5,709.00
Type: 4-Stroke SOHC 3 Cylinder – 2 Valves/ Cyl. Dry Weight: 81 kg/174 lbs.

What to do with outboard motor that has been sitting?

What Should You Do If An Outboard Has Been Sitting For Awhile? Remove the Spark Plugs & Oil The Cylinders, Replace Plugs if Needed. Check the Condition of the Gear Lube. Disconnect the Fuel Line From the Boat & Check the Condition of the Fuel.

How often should you run an outboard motor?

A few hours every week keeps the motor in better shape than using it two or three full days every month. The more often it gets used, the better it will run, just like any vehicle. If it’s left sitting idle at the marina or in a garage for the majority of the time, parts tend to go bad faster.

How do you date a Johnson outboard motor?

The year is encrypted in the serial number or model number on almost any Johnson outboard. From 1980 to present the year is coded in the serial number.

Can you tell the year of an outboard motor by the serial number?

How much fuel does a 4 stroke outboard use?

On average, an in-tune four-stroke gasoline engine will burn about 0.50 pounds of fuel per hour for each unit of horsepower. Likewise, a well-maintained diesel engine burns about 0.4 pounds of fuel per hour for each unit of horsepower it produces.

How much fuel does a rib use?

It uses 900 Low-Grade Fuel per hour or 15 per minute.

Related Post