How do I reset my Vera controller?

How do I reset my Vera controller?

The Vera Edge controllers can be reset to factory defaults by holding the reset button for 20 seconds and releasing it. This will reset the Z-Wave network and change it’s House ID, and clear your account and user configuration data from your controller.

How do you set up a Vera light?

Installation

1. Plug the Vera Lite into your mains supply and connect it with an Ethernet cable to the internet via router or home network.
2. Simply switch on the Vera Lite and wait about 2 minutes until the LEDs at the front light up continuously.
3. Select the tab “Support” and then click on “Setup” and chose “VeraLite”.

How do I reset my Vera 2?

You can hold down that button there and then it should trigger the watch to restart.

How do I reset my Vera 3?

Reset to factory default

Alternatively you can reset the Vera 3 by pushing the reset button for at least 10 seconds.

Why is my Vera controller offline?

To fix the problem:
Make sure that the internet cable is connected to an internet source and/or try a different ethernet patch cord. Also, if your Vera controller is connected to the router via a switch (a network distribution box), try connecting the controller directly to the router. Also, try resetting the router.

How do you use Vera 3?

Vera 3 Set Up Instructions – YouTube

How do you manually reset a Fitbit?

Press and hold the back and bottom buttons until you see the Fitbit logo on the screen. Let go of the buttons. If you still have issues with your device, turn it off and turn it back on.
…
Restart.

1. Connect your device to the charging cable.
2. Press and hold the buttons on your tracker for 10 seconds.
3. Release the buttons.

How do I reset my Fitbit to factory settings?

On your Fitbit device, open the Settings app. Clear User Data. When prompted, press the screen for 3 seconds and release. When your tracker vibrates and the clock screen appears, your data is erased.

How do I pair my Vera controller?

1. Open your Vera UI7 Dashboard.
2. Open the Settings tab on the left menu.
3. Press Net & Wifi.
4. Select “Through a Wi-Fi access point”
5. Press “Scan and connect to a wifi network”
6. Wait for the nearby hotspots to appear on the list.
7. Type in your passphrase and press “Connect”

What happened to Vera controller?

As a result, we currently have no plans to manufacture more of them, but as noted, our new controllers will have all the same capabilities, along with faster processors, new features, and a state-of-the-art platform. We will, however, continue to support the Vera platform as we have done over the last ten years.

How do I add a device to Vera?

Step-by-step guide

1. Go to the Devices section.
2. Click Add Device.
3. Choose a Generic Z-wave device from the list.
4. Click Next.
5. Click Next.
6. Follow the inclusion process as described in the users manual.
7. Enter the name of the added device and choose a room it will be placed in.

How do I connect to Vera edge?

How do I reset an unresponsive Fitbit?

Press and hold the button or buttons on your tracker for 5 seconds. Release the button. When you see a smile icon and the tracker vibrates, the tracker restarted.

Where is the reset button on my Fitbit?

Reset and Factory Reset Fitbit Charge 3 (Quick & Easy) – YouTube

How do I delete Fitbit and start again?

From your mobile app:

1. Open your Fitbit app and tap on the “Today” icon at the bottom of the screen.
2. Tap on your account icon (usually your photo) at the top left corner.
3. Scroll down until you see “Manage Data” and select it.
4. Tap on “Delete Account.”
5. Once again, tap on “Delete Account”

How do I reset my Fitbit charge for a new user?

Fitbit factory reset

1. From your tracker, swipe across to the ‘Settings’ menu.
2. Once in the ‘Settings’ section, find the ‘About’ tab and tap it.
3. From here, scroll to the section that’s labelled ‘Factory Reset’ or ‘Clear User Data’.
4. You’ll then be prompted to confirm the decision to clear your Fitbit to its box settings.

How do I reset Vera Plus?

VeraPlus is extremely easy to factory reset. With the VeraPlus fully booted and plugged, locate the recessed reset button next to the Select and Sync buttons. Then take and paper clip and press the reset button 6 times within 6 seconds.

How do I add a device to my Vera Lite?

Vera UI7 How to add Z-Wave Device to Vera system – YouTube

How do I put my Z-wave device in pairing mode?

Z-Wave / Zigbee Device Pairing Guide

1. Click on “add device”
2. Click on Other Devices. This will open the paring screen and the gateway will search for the new device.
3. Follow the steps below to complete the pairing of the device with the gateway.
4. Click on Add Device.
5. Click on Other Devices.
6. Power up the Z-Wave device.

What port does Vera use?

You’ll need to know the IP address for your Vera controller. The port number should be 3480 or 49451.

How do you reset a frozen Fitbit?

Fitbit Sense: Frozen or Unresponsive or Can’t Reboot? Easy Fix! – YouTube

How do I get my Fitbit back to factory settings?

How to factory reset your Fitbit

1. Swipe left on your Sense’s home screen until you find the Settings icon. It will be a little gear. Tap it to open it.
2. Scroll vertically until you come to the About option. Tap it.
3. Select the Factory Reset option.

How do I reboot Vera?

Press and hold the reset button, on the side, for 30 seconds. Release the reset button and unplug the power cord from VeraSecure. The power light will blink for a few seconds and then the unit will turn off. Reapply power to start the unit again.

How do I put my Z wave device in pairing mode?

How do I reset my Z-Wave light switch?

Resetting GE Z-Wave in wall paddle switches to factory defaults – YouTube