How much does it cost to Regear a transmission?
Some places charge $150/hour for labor. Find a local shop that charges $75 or so. $1500–maybe a little more–for all of that work. You should be able to find a quote in the $1200 range, but then they ask, “You don’t really want to keep them old bearings in there, do you?” That bumps it up into the $1500-1700 range.
What does it mean to Regear a Jeep?
Regearing is the process of changing your pinion gears and ring gears to a different ratio, which changes the balance of torque and speed. Regearing your Jeep is a crucial step in adjusting the size of your tires since improper gearing can result in more stress being transferred to the axle.
How much does it cost to Regear a JK?
Depending on your type of Jeep, what you want to be done, and where you get it done, it will cost anywhere from $1,200 on the low end to $3,000 on the high end. This price range typically includes parts and labor done by a professional.
Do you have to Regear both axles?
1- yeas you have to regear both front and rear axles, if you do not you will cause major damage to your drive line, because the wheels front and rear will not be turning at the same speeds.
How long does it take to Regear a Jeep Wrangler?
It shouldnt take longer than two days max if they have a lot of buisness. You should call back the reputable shop and ask them if there is a specific day you can drop you car off in the morning. That way you can pick it up later that day.
What gears are needed for 35 inch Jeep tires?
In most applications, with normal driving habits, you’ll usually want to back up the 35-inch tires with 4.88 gears. However, if you live in the mountains, frequent very hilly areas, or rarely run at top speed on the highway, you might be better off with 5.13:1 or even 5.38:1 ratio axle gears.
What is the best gear ratio for Jeep Wrangler?
What gear ratio is best for 33 inch tires?
While 4.56 is ideal for 33″ tires and 5-speed transmission, the 3-speed auto’s lack of an verdrive makes 4.10 the best all-around street and offroad ratio.
What gear ratio should I use for 35 inch tires?
That’s why I run a 4.56 gear ratio with 35″ tires. This gives me decent fuel efficiency at highway speeds, and enough low end power to throttle through difficult obstacles.
How long does it take to Regear a Jeep?
What gear ratio should I run with 35 inch tires?
Gear Ratio Chart
| Gear Ratio | ||
|---|---|---|
| Tire Size | 4.11 | |
| 34″ | 2640 | |
| 35″ | 2565 | |
| 36″ | 2493 |
What is the best gear ratio for 35 inch tires Jeep Wrangler?
Are 3.73 or 4.10 gears better?
4.10s are going to accelerate faster and decelerate faster on lift. However the trade off is greater fuel consumption per mile driven and higher engine speed per given road speed. In basic terms the 4.10s will feel quicker and 3.73 will feel faster.
What gear ratio do I need for 33 inch tires?
4.56 works well for the 3-speed automatic and 33’s, 4.88 is optimal for the 5-speed manual transmission. With the 4-speed automatic, 4.88 isn’t even enough for 35’s.
What gears go with 33s?
How hard is it to Regear your Jeep?
It’s not impossible and many take the time to learn how to do it but if you do decide to tackle the job, don’t plan on being able to regear both axles in a weekend. It’s going to take some time to figure it out because there’s a lot of trial-and-error work that needs to be done to get it done correctly.
What gear ratio is best for off roading?
50-60s Crawl Ratio – Backroads and light trail use. 80s Crawl Ratio – Intermediate trail use. 110-130s Crawl Ratio – Ideal for crawling, it allows taking obstacles at a slow, controlled speed without riding the brakes or applying constant throttle to avoid stalling.
Can I run 37s with 4.56 gears?
You will be permanently fine at 4.56’s, even on a heavy 37.
Are 410 gears good for highway?
Installing 4.10 gears improves the car’s performance on the track but with negligible effects to the highway driving. If your car is equipped with an overdrive, you may not even notice a difference in gas mileage with the new higher gearing.
What is a 4.10 axle ratio good for?
Pickups towing big 5th wheel trailers do well equipped with 4.10:1 axle ratios. The thinking behind the decision to stick with the base axle ratio, which is typically 3.08:1 or 3.42:1, is the ratio comes standard, so that’s what the vehicle manufacturer feels is the best setup.
What is the stock gear ratio in Jeep Wrangler TJ?
Standard were a Dana 44 rear axle with a 3.73 gear ratio and the Command-Trac NV231 transfer case.
What gears should I run with 40 inch tires?
For those huge 40 inch tires, 4.56 gears would be much better than 4.10. Actually, if you want to keep the RPM vs speed the same as the factory setting with those 40 inch tires, you would need something like a 4.90 gear ratio.
What is a good gear ratio for 35 inch tires?
What’s the best gear ratio for 37 inch tires?
Upgrading to 37-inch tires would calculate to about a 16 percent increase in tire diameter. Increasing the 4.10 axle ratio by 16 percent would dictate the need of a 4.75 axle ratio to match the 37-inch tires.