What does F21 mean on a Maytag Epic Z washer?
The Maytag washer code F21 means there is a long drain problem. The symptoms are that the washer stops in mid-cycle, the door won’t open and the drum won’t drain.
How do I fix F21 on my washing machine?
Sometimes your washer might display the F21 error code when it shouldn’t, and a simple reset will get your washer working again. To reset your washer, you simply need to press “Pause/Cancel” to cancel the current wash cycle.
Why is my washer throwing a F21 code?
If your Whirlpool washer has an F21 error code, it indicates that your washer has a drainage problem. The good news is the issue can usually be resolved by simply clearing the drain filter or drain hose.
How do I reset my Maytag Epic Z washer?
Power/cancel reset
Another method for resetting your Maytag washer is to press the Pause/Cancel button, then select the appropriate cycle, and then press the Start/Pause button. This method works best when trying to move the washer onto the next cycle or when trying to clear an error code.
How do I fix error code f21 on Maytag?
Possible Causes and Action:
- Disconnect power to the washer.
- Turn off both hot and cold water faucets.
- Make sure the drain hose is free from kinks and obstructions.
- Clean the drain pump filter.
- Plugin the washer.
- Try to restart the machine.
How do I clear the error code on my Maytag washer?
To remove the code, press pause or cancel button twice and the power button once. If the code is still displayed, unplug the washer or disconnect the power for one minute. Items were detected in the washer during the Clean Washer cycle. Remove items from the drum and restart the Clean Washer cycle.
How do I fix error f21 on Maytag?
Possible Causes and Action:
- Turn the washer ON to verify the pump operates.
- Check the drain hose and make sure it is not plugged or kinked.
- Unplug the washer or disconnect power.
- Check the electrical connections at the pump and make sure the pump is running.
- Check the drain pump filter for foreign objects.
How do you clear the error code on a Maytag washer?
How do I unlock my Maytag Epic Z washer?
How to Unlock the Controls for an Epic Maytag Washer
- Place your finger on the “Cycle End Signal” button on your Maytag Epic washer control panel.
- Hold your finger in place for at least three seconds until the “Control Locked” status LED light on the control panel goes off.
Do Maytag washers have a reset button?
Press power/cancel then start/pause
Maytag washers do not have a reset button, but it is possible to reset them by pressing certain buttons in a particular combination. This is the simplest method to try: Press power/cancel first. Next, pick a fresh cycle to run.
How do I fix error F21 on Maytag?
What does F21 mean?
F21” is a Long Drain error. If the drain time exceeds 8 minutes this error code will be displayed. In addition, a “SUDS” error may also be displayed. This may be an indication of a drain pump problem and/or clog in the drain line.
How do you reset the sensor on a Maytag washer?
Press and hold the Start/Pause button for 3 seconds. All indicator lights should be off at this point. Reset the Washer: To reset (clear) the washer, rotate the Cycle Selector Knob counter-clockwise (left) to clear any sequence.
How do I fix my Maytag F21 code?