What is a Panhard on a car?
A Panhard rod (also called Panhard bar, track bar, or track rod) is a suspension link that provides lateral location of the axle. Originally invented by the Panhard automobile company of France in the early twentieth century, this device has been widely used ever since.
What kind of car is a Panhard?
Panhard was a French motor vehicle manufacturer that began as one of the first makers of automobiles. It was a manufacturer of light tactical and military vehicles. Its final incarnation, now owned by Renault Trucks Defense, was formed by the acquisition of Panhard by Auverland in 2005, and then by Renault in 2012.
In which year was the Panhard car designed?
René Panhard and Emilé Levassor built their first car in 1890, a mid-engined, back-to-back horseless carriage. The following year, they built what many consider to be the first modern car, in terms of architecture: front mounted engine, clutch mounted between the engine and gearbox, and a driven rear axle.
Where was the Panhard car made?
Panhard Levassor 4hp motor car, France, 1894-5. Panhard & Levassor were pre-eminent among early French car makers and boosted their reputation through a number of successes in long-distance road races on the Continent in the 1890s.
What is a rear Panhard?
Panhard bars are one device that can be used to locate a solid rear axle under a vehicle. The bar is mounted across the vehicle, with one end connected to the rear axle housing and the other end connected to the body.
Why is it called a Panhard bar?
Lateral Location Methods
The Panhard bar, named after the early 20th century French car company, is a single link attached between the chassis and the axle assembly.
Do I need a Panhard rod?
A panhard rod should be considered mandatory on all four-bar systems, and recommended on all cross-steer systems. The bar is normally mounted to the frame on the driver’s side and to the axle/batwing on the passenger side. It should run parallel to the drag link so as not to induce bump steer.
Is a Panhard bar the same as a sway bar?
They do two differnet things, a sway bar reduces body roll under hard cornering, and a panhard bar, watts link, mumford link, wishbone or any other such device, is a lateral support device, that keep the rear end housing from moving side to side under hard cornering.
Does a Panhard bar move?
All panhard bars swing in arcs, which means that the roll center moves up and down with suspension travel, including chassis roll. If the panhard bar is mounted to the right side of the chassis (as shown in Figure 2), then the rear roll center will become lower as the chassis rolls to the right in a left-hand turn.
Is a track bar the same as a Panhard bar?
A track bar, also known as a panhard rod or panhard bar, laterally locates the front axle in a link suspension system.
What does lowering the Panhard bar do?
Adjusting it downward moves the rear axle to the left, and therefore both rear tires. Raising the track bar makes the car looser (oversteer) and lowering the track bar makes the car tighter (understeer).