What is Net2?

What is Net2?

Net2 is an advanced PC based access control solution. Our Net2 software offers centralised administration and control of sites with up to 1,000 doors and 50,000 users. Perfectly tailor access privileges to groups or individuals quickly and easily using our intuitive, user-friendly software.

How do I set up Net2 online?

How to access the online software:

1. Open Net2, sign in, and go to ‘Options’
2. Complete the registration process for Net2Online using a unique site name and a valid email address.
3. Click on the URL at the bottom of the registration page.

What ports does Paxton Net2 use?

Compatibility – Network

IP data traffic between the user interface software and the server software (where client server mode is used) and between the Server software and the I/O boards use ports in the range 6474 to 6485 inclusive. When using a TCP/IP RS485 adaptor, ports 10001 and 30718 are used.

How do I reset my Net2 plus?

First stop the net 2 server. Do this via the net 2 pc software by doing a right click to the green triangle located at the bottom of your screen. And select stop net 2 server.

How do I install Net2?

Open the Control Panel. Select Add/Remove Programs. Highlight Microsoft.NET Framework 2.0 and click Change/Remove. Select Repair or Uninstall.

What is a Paxton switch 2?

Switch2 is a standalone system with a seperate control unit. This means it is suitable for high security doors and general external use. The system consists of a control unit, reader, tokens, power supply and an electric lock.

How does Paxton key work?

Once the Paxton Key app has been registered using your unique registration code, simply open the app and present your device to the reader at a door or gate. Once the Paxton Key app has been installed to your WearOS watch, open the app on both your Android phone and WearOS watch to complete the setup.

How do you reinstate a Net2 door?

The Reinstate button is found in the Doors screen. Select the ACU’s you wish to reinstate and then click OK. The door control units should show a Tick alongside each one. If any control units show a Cross, they are off-line and will not receive any card updates.

What is a Paxton ACU?

Paxton Net2 is a PC based networked access control system, which gives users the advantages of event reporting, central control and flexible control over users access. Each Net2 control unit can be run independently or as part of a network making its own decisions and remembering events.

How do I make my ACU Paxton Net2 default?

To do a Paxton Net2 reset, you need to follow these 8 steps: Stop the Server. Power down ACU.
…

1. Stop the Server.
2. Power down ACU.
3. Insert a link.
4. Power up the Paxton ACU.
5. Remove link.
6. Restart the Server.
7. Leave 2 mins for firmware update.
8. Check ‘Green Tick’

How do I reset my Paxton switch 2?

Enter programming mode and hold down “9” for 3 seconds. Re-enter the programming code and hold down “9” for a further 3 seconds. The keypad will now be reset.

How do I reset my Paxton compact?

Only use one method to reset the system.

1. Power down the unit.
2. Press and hold the exit button.
3. Power up the unit. It will beep several times.
4. Wait for a further beep and then release and press. the exit button twice more while it beeps 3 times.
5. The reader will beep 6 times.

What frequency does Paxton use?

It operates at 2.4GHz and can co-exist with wireless LAN networks and other devices using this Qfrequency such as DECT phones. All Paxton Access products employ AES128 encryption technology to ensure Qthat all communication remains secure.

What is Paxton fob used for?

With Paxton Access Control Systems, you simply provide each authorised individual with a Proximity card or key fob, which allows them to open doors that are locked using the Paxton Net2 system.

Can’t connect to Net2 server?

2. When opening the Net2 software it is displaying a ‘cannot connect to server’ error. This issue is normally caused by the Net2 service stopping or failing to start, which can be a result of a corrupt installation or database.

How do I reset my ACU?

HARD RESET

1. Disconnect power from the ACU.
2. Hold down the ADMIN button for 15 seconds.
3. While still holding down the ADMIN button, reconnect the power, and continue to hold the button for another 15 seconds.
4. Wait 15 minutes before provisioning the ACU.

How do I reset my Paxton keypad?

What can I do if it all goes wrong? – The keypad can be reset back to factory defaults with the exception of the programming code. Enter programming mode and hold down “9” for 3 seconds. Re-enter the programming code and hold down “9” for a further 3 seconds. The keypad will now be reset.

How do I make Paxton my default reader?

How do I change the code on my Paxton switch 2?

How can I change the programming code? – Enter programming mode and hold down “6” for 3 seconds. Enter the new programming code followed by the bell button. Re-enter the new code to confirm the change followed by the bell button. The new code is now programmed; the old programming code will no longer work.

Can Paxton fobs be cloned?

How To clone Paxton fobs: Simply drop the fob to be copied into the reader, press the button to read, remove the fob and place a blank fob into the reader and press the button again. It’s that quick.

Are Paxton fobs RFID?

Paxton fobs generally run on a frequency of 125kHz which is the standard frequency for basics RFID fobs.

Can you clone a Paxton fob?

With the new Paxton Fob Copier, you will be able to quickly and easily clone Paxton. Al you have to do is, drop the fob to be copied into the reader, press the button to read, remove the fob and place a blank fob into the reader and press the button again.

How do I make my Paxton Net2 controller default?

How do I reset my switch 2?

How to reset a Nintendo Switch

1. Press the small circular power button on top of the Switch console, and hold it down until the system powers off.
2. Wait a few seconds, then press the power button again.
3. The Switch should display the Nintendo logo, and then turn on again within a few moments.

How much does it cost to copy a fob?

It Costs Just $25 to Copy a Key Fob at a Kiosk
For a low-frequency 125kHZ RFID card or fob, it’s relatively inexpensive to have it copied, costing just $25 at a kiosk [1]. In fact, the devices that can replicate these fobs are also cheap, costing just a few dollars online.