What lights should be on my Telstra modem?
Mobile Signal light
Green: Good signal strength. Orange: Okay signal strength. Red: Poor signal strength. Off: Telstra mobile network is unavailable.
How do I know if my Telstra modem is working?
Remove the power cable from your modem for 10 seconds, then plug it back in. Wait 1-2 minutes for the modem to settle and go ‘green’, now check to see if your devices are connecting. This is a ‘reboot’ and can often solve connection problems.
How do I reset my Telstra ADSL modem?
To do this, use a paperclip (or something similar) to press and hold the reset hole at the back of your Telstra Smart Modem, and keep it pressed in for 15 seconds. Allow 2-5 minutes for the modem to reconnect to the internet.
How do I test my Telstra modem?
In a browser, go to ‘speedtest.telstra.com’ to perform a speed test. If you’re able to access the internet when plugged directly into the nbn connection box, there may be a piece of equipment that is causing the issue. Unplug the Ethernet cable from your computer and plug it into the Gateway.
What lights should be lit up on my modem?
The power light, downstream indicator, upstream indicator, online indicator, and link light on your modem should all be green. If your power light is yellow, it may be upgrading, so leave the modem on and give it a little time to do its thing.
What lights should be flashing on my modem?
Flashing POWER light means that your modem/router is dealing with updates. Slow blinking DSL/COAX light means that your modem is searching for the ISP’s core network and fast blinking DSL/COAX light means that the device is trying to establish a connection.
How do I test my ADSL line?
Connect the RJ11 cable from the router, into the micro-filter and so into the Test socket. Confirm that the router is powered on. Check the lights on the router. Sync light flashing indicates that the router is trying to establish sync.
What lights should be on my modem?
How do you know if your modem is not working?
If your modem doesn’t respond and all lights are on, this is a sign your modem is dead. The symptoms of a non-responsive modem include: No internet access when you connect via Wi-Fi or with an ethernet cable. Inability to connect to Wi-Fi (if it’s a dual modem/router)
How do I know if my modem is working?
Check the lights on your modem. The lights on the side of your modem can tell you whether or not your modem is connected to your router and the internet. If none of the lights on your modem are glowing, then your modem isn’t turn on, so you should check the power cable. Check the power supply and coax cables.
What does each light on a modem mean?
If the light is blinking green, data is being transmitted or received at 100 Mbps. If the light is on and yellow, the port has detected link with a 10 Mbps device. If the light is blinking yellow, data is being transmitted or received at 10 Mbps. If the light is off, no link is detected on that port.
Should all lights on modem be solid?
The power light indicates that your modem, router, or modem/router has a reliable power source. Although it may flash or turn yellow when your device is downloading and installing routine upgrades, this light should normally stay solid green.
What do my modem lights mean?
A blinking light means you are having difficulty connecting to the internet. Ensure all telephone cable connections are tight and secure and reboot the modem and router (if applicable). POWER: A solid green light indicates the unit is properly connected to power. A blinking red light indicates a possible modem failure.
What color should my modem lights be?
How do I know if my ADSL modem is working?
To determine ADSL network connectivity, check the DSL/ADSL/WAN light (varies by model). The light should be solid. All modems also have a LAN/Activity light, which should be solid/flashing depending on Internet activity. Some modems also have a Test light, which should remain off after reboot.
Why does my ADSL line keep dropping?
The most likely reasons for this is either bad quality of the lines infrastructure or the ISP’s equipment, or your ISP having over-committed its lines, or some interference caused by adjacent commercial equipment.
How do I read my modem lights?
How to Read the Lights on My Cable Modem
- Find the light marked “Power.” This light is lit if the modem is connected to its power source.
- Find the light marked “Receive.” If it is on, the modem is receiving data from the network.
- Find the light marked “Send.” This light is lit if the modem can send data to the network.
How do I check my modem status?
To view the status of your cable modem or modem router initialization:
- Launch a web browser from a computer or mobile device that is connected to your network.
- Enter your cable modem or modem router’s user name and password. The user name is admin.
- Select Cable Connection. The cable connection information displays.
How do I check the health of my modem?
Turn off Wi-Fi on your computer to ensure you’re connecting to the internet via ethernet. Open Google Search and type “internet speed test,” and select Run Speed Test. If the resulting download and upload speeds are far below what you should be getting, this may indicate a failing modem.
How do I know when my modem needs to be replaced?
How do you know if you need a new modem?
- You can’t connect to the internet.
- Your Internet connection randomly drops out.
- You frequently have to reset or restart your modem.
- Your streaming is lagging.
- Your internet speeds are inconsistent.
- Your modem’s indicator light remains unlit.
- Your modem runs constantly hot.
What lights should be blinking on my modem?
How many lights should be lit on my modem?
Most of the time you should have 6 main lights on your modem. When it comes to troubleshooting internet problems, the first indicator of trouble besides not having internet, will usually be that the lights on the modem will have either changed colour, they are blinking, or they are not on at all.
What do colors on modem mean?
How do I fix my ADSL connection?
Troubleshooting an ADSL internet connection
- Check all your cables and filters/splitters are connected properly.
- Ensure that your modem is set-up properly.
- Turning your modem off for 15 minutes to allow the modem to reconfigure its network settings before attempting to reconnect to the network.