What motor is in a 93 Chevy 1500?

What motor is in a 93 Chevy 1500?

Used 1993 Chevrolet C/K 1500 Series Specs & Features

Engine
Base engine size 4.3 L
Cylinders V6
Base engine type Gas
Horsepower 165 hp @ 4,000 rpm

What engine is in a 1993 Chevy 3500?

Powertrain

Engine V8, 454/7.4 Liter
Cylinders 8
Total no. valves 16
Transmission Automatic
Drivetrain 2WD

How much can a 1993 Chevy 1500 tow?

Tow Capacity for a 1993 Chevrolet/GMC K1500 Pickup (4WD):

Year Make Tow Capacity
1993 Chevrolet/GMC 5000 lb

What transmission came in a 1993 Chevy s10?

A 5-speed manual gearbox was standard with the 4-cylinder and 2.8-liter V6; 4-speed automatic was optional for the 4-cylinder. Pickups might instead have an optional 160-horsepower, 4.3-liter V6, offered only with automatic transmission.

What transmission is in a 1993 Chevy 1500?

Product Description. This is a Chevrolet Silverado 1993-1994 Rebuilt Transmission 4L60E.

How much horsepower does a 305 V8 have?

What are the specs for a 305 Chevy engine? It’s a 305 cubic inch (5.0 liter) small-block V8, featuring a 3.743-inch bore. Depending on the year and engine sub-model, you can see HP ranging from about 160 to 230.

How much can a 1993 Chevy 3500 tow?

The maximum gross trailer weight for a 1993 Chevy 3500 series truck with the 7.4 liter (454) motor is 10,000 pounds.

What transmission is in a 1993 Chevy 1500 2WD?

RMT290C-3 – HM290 Manual Transmission for GM 1993-1995 1500 And 2500 2WD 5 Speed.

What vehicles came with 700R4?

Vehicles Equipped the 700R4

  • Blazer: 1982-1991.
  • Caprice: 1982-1992.
  • Corvette: 1982-1992.
  • Camaro: 1983-1992.
  • Suburban: 1984-1992.
  • Astro Van: 1985-1992.
  • S10 Blazer: 1989-1992.
  • S10 Pickup: 1989-1991.

Does a S10 have a 4L60E transmission?

One of the best solutions for most serious Chevrolet S10 transmission problems is a remanufactured 4L60E transmission. These are typically factory built, and come with modifications that will extend the service life.

Is a 4L60 and 4L60E the same?

The TH700R4 was renamed “4L60” (RPO MD8) following the new General Motors naming convention when the electronic version, 4L60E (RPO M30), was phased in as the 4L60 was being phased out. This happened in 1993 for trucks, vans, and SUVs, and 1994 for rear wheel drive passenger cars.

What years did Chevy use the 700R4 transmission?

The General Motors 700R4 transmission was manufactured by Chevrolet in 1981 to run with 1982 model year vehicles. It is a four-speed automatic transmission with overdrive and was introduced as a way to make V8-powered cars and trucks more efficient.

What engine is better a 305 or 350?

While the 305 does better at fuel mileage because of its smaller displacement, ports, and valves, the 350 is excellent at power. All thanks to its larger ports, valves, and displacement. So, even if you’re getting better fuel efficiency with a 305, it does not make up for its deficiency.

What year is the best Chevy 305 engine?

What year is the best Chevrolet 305 engine? The simple answer to this question is that it depends. If you’re looking for high horsepower, look to a later fuel-injected model in the late 1980s or early 1990s. If you’d prefer a carburetted model, a late 1970s or early 1980s model will do well.

What transmission is in a 1993 Chevy 2500?

Moveras – 4L60E – Transmission (Part No.

How much does a 1993 Chevy 3500 weight?

10,000 lbs1993 Chevrolet C/K 3500 / Gross vehicle weight rating

What kind of transmission is in a 93 Chevy 1500?

Is a 4L60 the same as a 700R4?

In 1990, the 700R4 was redesignated as the 4L60 (4-speeds, Longitudinally positioned, 6000 lbs. GVW). This was a change in name only with no significant mechanical changes associated.

How much HP can a 700R4 take?

The TCI Super StreetFighter GM 700R4 Transmission is designed for higher horsepower and higher torque street/strip applications. Features: Capable of handling 1000+ HP. 300M input shaft allows for higher torque capacity.

What year 4L60E are compatible?

700R4/4L60E/4L65E Year Ranges

Year Ranges Transmission Kit Code (Options Chart)
1994-1996 4L60E B1
1997 4L60E B1
1998-2000 4L60E B1
2001-2003 4L60E/4L65E B1

How many different 4L60E transmissions are there?

Spotter’s Guide: 4L60E Transmission

Transmission Overall Length Bellhousing to Crossmember
TH350 (6” tailshaft) 27 11/16” 20 3/8”
4L60E (1993-’96) 30 3/4” 22 1/2”
4L60E ’96 – later w/removable bellhousing 30 3/4” 23 3/16”
4L60E ’98 – later w/ LS style bolt pattern 31 5/32” 23 19/32”

Which is better TH400 or 4L60E?

Much to our surprise, the most significant difference between the TH400 and the 4l60E transmission is the first gear ratio — the 4L60E has a 3.06 first gear, 1.62 second, 1.00 third, and a . 70 overdrive. The TH400 and 4L80E both come with a 2.48 first gear, 1.48 second, and 1.00 third gear.

Can you make a 4L60E without a computer?

Externally, all it needs is a 12-volt source and an engine-vacuum reference. However, if your trans is, in fact, a 4L60E, running it off a computer is mandatory. On “E” transmissions, the computer controls everything: TCC lockup, gear changes, shift quality and firmness, and line pressure.

How much HP can a Chevy 305 make?

I completely agree that a 305 can be built to make 450 hp. That’s not too difficult. The engine is limited to smaller heads with 1.94-inch valves because larger 2.02-inch valves won’t clear the cylinder wall.

How much HP does a 305 TBI make?

The SBC 305 TBI engine found in everything (trucks, camaros, etc) has an astonishing power output of 170 hp at the crank.

Related Post