What seatpost has the most setback?
These two-bolt seat posts have a generous 30mm of setback, among the longest ever. This is very important for those who ride leather saddles that often have little fore-and-aft adjustment due to the short rails.
Are setback seatposts more comfortable?
– The best performing regular seatposts offer 50-60% more flex than the worst performing. – Carbon is able to deflect more than both aluminium and titanium. – Setback seatposts tend to be worse performing, making up places 10, 12, 13 and 14 in this test.
What is the purpose of a setback seatpost?
Road bikes for years have had posts with setback- a seatpost where the clamping area for the saddle was behind the centre of the post that came up from the seatpost. The theory behind this was to allow for proper weight distribution (ideally 60 % on the rear of the bike, 40 % on the front).
Do you need carbon paste for carbon seatpost?
From what I’ve read, carbon assembly paste is generally recommended for carbon on carbon seat posts and also stems to carbon handlebars. The carbon assembly paste seems to hold the seat post in place great, I don’t have to overtighten the seat post clamp bolt at all and the seat has never slipped.
Do carbon seatposts make a difference?
They can also help make your bike a lot comfier too. Imagine the difference in ride-quality between a basic aluminium and a good carbon frame. It’s no surprise that swapping an alloy seatpost for a more flexible carbon one will both save weight and also add comfort where it’s often badly needed.
Do carbon seatposts break?
Registered. carbon seatposts not only break from being run very high, but also from being run low, because the flex is in in a smaller area, i had an easton post do this.It wasn’t a catastrophic failure just a crack.
Can you put a carbon seatpost in an Aluminium frame?
A carbon seat post may get stuck in an aluminum frame even when carbon paste is applied. The chances are low, but the outcome is not unheard of when the seat post isn’t removed over a long period.
Is carbon more comfortable than Aluminium?
Carbon does naturally absorb vibrations and shock better than Aluminium due to its material properties. However, frame material is going to make less of an impact on your comfort than other factors such as tire pressure, fit and geometry, your seat, and handlebar positioning.
Do you grease a seatpost in carbon frame?
Should you use carbon paste or grease on your seat post – YouTube
Do you grease a carbon seatpost steel frame?
You should absolutely grease your seatpost (unless it is carbon fiber).
How long do carbon seatposts last?
For example, Canyon recommends that you replace their carbon handlebars and seatposts every 3 years. They also recommend that you replace their carbon forks every 6 years or after a crash.
Is it safe to clamp carbon seatpost?
Condensed Answer: Carbon seat posts can be clamped if they’re round. However, carbon has poor resistance to compression, and the clamp shouldn’t be overtightened to avoid damaging the component. It’s recommended to wrap the seat post in a soft cloth to prevent scratches.
Should you grease your seatpost?
Greasing your seatpost will prevent problems like this: “Removing Seat Post rusted into downtube”. Don’t use chain oil, grease is what you want. As whatsisname pointed out, all fasteners on your bike should be lightly greased. This is what keeps them from corroding and seizing over time, becoming a real pain to remove.
What is a disadvantage of using carbon Fibre for bikes?
Flexible strength and fatigue life is the biggest disadvantage with carbon fiber. Carbon fiber is a very rigid material that doesn’t like to be flexed and bent. As well much flexing causes cracks and fissures in the structure and exposes the individual fibers which aren’t so strong by themselves.
Can you put a carbon seatpost in an aluminium frame?
How do I stop my carbon seatpost from creaking?
How To Stop Your Saddle Creaking – YouTube
How do I stop my carbon seatpost seizing?
During your maintenance, one of the most important things you can do for the life of your frame is to make sure that your seatpost is not seized. Removing the post, cleaning it and the seattube, then applying a thin coat of grease or carbon paste will prevent seizing.
Does grease harm carbon fiber?
BIKE HACK: Carbon Myths – YouTube
Is it OK to hang a carbon bike?
One thing that won’t harm carbon rims/wheels is hanging a bicycle from them on hooks for storage. They can easily support the weight of the bike.
Can you clamp a carbon frame?
How do you keep a carbon seatpost from slipping?
Using your finger or a brush, apply a thin coat of new grease to the inside of the seat tube, or the outside of the seatpost. Re-insert the seat post to your preferred height, and clamp it in place. Use standard bicycle grease if your frame and seatpost are both any kind of metal (steel, aluminum, or titanium).
How long will a carbon fiber bike last?
Myth: A carbon frame won’t last as long as a metal one. Reality: As long as you don’t crash hard or take a hammer to the frame, a carbon bike can theoretically last forever. In fact, steel and aluminum last only so long before the metal fatigues and can no longer be used safely, but carbon remains stable indefinitely.
How long will a carbon frame bike last?
Unless they are damaged or poorly built, carbon bike frames can last indefinitely. Most manufacturers still recommend that you replace the frame after 6-7 years, however, carbon frames are so strong that they often outlast their riders.
Does carbon paste stop creaking?
Carbon paste has fixed all sorts of creaks for me. Often after getting stuck in the rain my bike creaks like crazy. Redoing my seatpost and stem with fresh carbon paste often fixes it.