Who makes Viega fittings?
Viega is a family owned international manufacturer of Plumbing and HVAC solutions. Viega sells PEX for Radiant heating and plumbing systems along with copper, stainless, and metal alloy pipe along with mechanical pressure fitting products.
…
Viega.
| Type | Limited liability company (LLC) |
|---|---|
| Headquarters | Broomfield, CO, United States |
Where is Viega manufactured?
Viega announced today that production of Viega MegaPress® and MegaPressG carbon steel press fittings has commenced at its manufacturing facility in McPherson, Kan. Viega broke ground for the 80,000-sq. ft.
Where is Viega PEX made?
Made in the USA and designed to save energy, Viega PEX solutions reduce the potential for leaks and increase confidence and peace of mind.
What is the company Viega?
Viega is an expert in healthy drinking water in buildings and one of the key technology leaders in the installation sector. As a quality-focused family business employing almost 5000 people, the company has over 120 years of experience in building technology.
How long has Viega been in business?
About us. The Viega Group, with a tradition of innovation for more than 115 years, has more than 4,000 employees worldwide and is among the leading manufacturers of pipe fitting installation technology.
Is Viega PEX A or B?
The Viega PEX system uses the PEX-b tubing (although you could also use another brands PEX-a) and a pressed ring securing the PEX to the fittings. Some advantages with the pressing system is that the fitting are now available with press rings already built-in.
How do you pronounce Viega?
- Phonetic spelling of viega. vie-ga. V-iega.
- Meanings for viega.
- Translations of viega. Russian : виега
When did Viega ProPress come out?
The pioneer of press fittings, Viega’s ProPress fittings have provided a strong alternative to traditional connections since their introduction in 1989 and now see over a million installations a day.
What does ProPress mean?
What Is ProPress? ProPress is a system for connecting copper pipes. A plumber uses a ProPress to fit a pipe joint and itself is a trading name used by Manufacturer Viega, but there are also other companies manufacturing the ProPress type fittings.
How do I know if I have PEX A vs PEX B?
Pex A vs Pex B – What’s The Difference? – YouTube
What’s better PEX A or PEX B?
Bottom line, PEX A is more resistant to burst pressure than PEX B. PEX A’s expansive material can handle up to 500 PSI, which makes it reliable in extremely cold temperatures. Since PEX B is a more rigid material, it will not hold up as well in similar situations.
Why is there a green dot on ProPress fittings?
A green dot on a Viega ProPress, MegaPress fitting indicates Smart Connect technology with an EPDM sealing element.
Do ProPress fittings leak?
In general, Viega Propress fittings only leak due to one of three reasons; the fitting was never pressed, the copper tubing was not properly inserted or the pressing jaws were not properly aligned. If the fitting was never pressed, confirm that the tubing is properly installed and proceed with pressing.
Is Viega a German company?
The family company was founded in Attendorn, Germany, in 1899. By the 1960s the company was on course to become an international group. Today, Viega exports to more than 75 countries and is mainly represented by independent sales offices worldwide.
What is the green dot on Viega fittings?
A green dot on a Viega ProPress, MegaPress fitting indicates Smart Connect technology with an EPDM sealing element. A yellow dot on a Viega MegaPressG fitting indicates Smart Connect technology with an HNBR sealing element.
Where is PEX not allowed?
PEX can’t be installed in high heat areas.
You can’t install PEX in high heat areas like near recessed lighting. This also means you can’t connect PEX directly to a hot water heater, but you can use a connecting material to do this.
Can you repress a leaking ProPress fitting?
Yes, although this should be avoided if possible. As a general rule of thumb, if the fitting is turned more than 5° it must be repressed to restore the resistance to rotational movement.
What is the green dot on Viega ProPress fittings?
How hot can ProPress fittings get?
Engineered for a variety of gas applications, including natural gas, LP gas and fuel oil, Viega ProPressG has been tested to withstand a maximum pressure of 125 psi and an ambient temperature range of -40 degrees F to 180 degrees F.
How long has Viega ProPress been around?
Can ProPress fittings be used on hydronic heating?
ProPress Stainless valves are made of 316 stainless steel and are available for potable and hydronic applications.
Do rats eat PEX pipe?
The Problem With Pex Tubing
Mice and rats will chew through anything they can, including plastic, so PEX tubing is at just as much risk as the plastic-coated wiring in a car or an HVAC unit. While all rodent damage can be expensive, if rodents chew through a home’s PEX water pipes, the result can be disastrous.
Can bacteria grow in PEX?
PEX pipe showed a higher growth of coliform bacteria than copper pipe [42]. The levels of released metal from plastic pipes were monitored in five pipe systems, PB, PVC, PP, PE, and cPVC.
Can you ProPress the same fitting twice?
Is PEX A or B better?
Kink-Resistance – PEX-A has the greatest resistance, PEX-B the lowest. You should never install kinked pipe. Bursting Pressure – Always check the tubing for maximum temperature and pressure ratings. Remember, the pressure ratings decrease as the temperature of the water increases.