Why is my printer not printing HP LaserJet P1102w?
This HP LaserJet p1102w not printing with USB issue could occur if the printer is not configured properly on the network. Try resetting the printing system, but beware that this will remove any existing print queue and reset customized driver settings. Ensure your drivers are updated and try again to see if this helps.
How do I reset my HP LaserJet P1102w?
Turn the printer off, hold down the wireless button and the cancel button (x button) while turning the printer back on and don’t release the two buttons until the printer stops making noise. Print out a configuration report and make sure the SSID and IP address are cleared.
Why is the red light blinking on my HP LaserJet P1102w?
The Attention light blinks when the printer is in an error state due to missing toner cartridge, the top cover is not properly closed, or the paper is not loaded correctly or is jammed.
How do I fix my HP LaserJet p1102 printer cartridge?
So the first step is to open up the top cover just like that and remove. The old toner cartridge just by grabbing onto this little piece right here and pulling it upwards.
How do I get my HP LaserJet P1102w back online?
Unplug the power cord from the wall outlet. Wait at least 60 seconds. Plug the power cord back into the wall outlet. Reconnect the power cord to the rear of the printer.
How do I print a test page on HP LaserJet P1102w?
Print a Self Test/Device Configuration page through the control panel (HP LaserJet Pro M12w, P1102w, and P1109w printers)
- Press and hold the Cancel button until the Ready light blinks.
- Release the Cancel button . The Self Test/Device Configuration page prints. Figure : Self Test/Device Configuration page.
How do I fix the flashing light on my HP printer?
Follow these steps to reset the printer.
- With the printer turned on, disconnect the power cord from the rear of the printer.
- Unplug the power cord from the wall outlet.
- Wait at least 15 seconds.
- Plug the power cord back into the wall outlet.
- Reconnect the power cord to the printer.
- Turn the printer on.
Why is blue light blinking on my HP printer?
A flashing blue light would indicate the printer has not made a proper wireless connection. Touch the wireless icon at the top of the printer’s screen and check the connection and re-enter the connection information if needed.
How do I fix the orange blinking light on my HP printer?
With the printer turned on, disconnect the power cord from the rear of the printer and also unplug the power cord from the wall outlet. Remove USB cable, if present. Wait for 2-3 minutes, press and hold the power button on your printer for about 30 seconds to remove any additional charge.
What to do if the printer is blinking?
Perform Power Reset
Remove any USB cable that is connected to the printer to any other device including computer. Leave the printer in the off state for a few minutes. Press and hold the power button for 30 seconds to reset the settings. Now plug back the power cable to the wall outlet.
How do you fix a toner cartridge?
How to fix a Brother toner cartridge with quality problems – YouTube
How do I change the ink in my HP LaserJet p1102w?
HP LaserJet P1102w Instructional Video – YouTube
Why is my HP printer showing as offline?
This can be caused by an error between your device or computer and the printer. Sometimes it maybe as simple as your cable not correctly attached or a simple error coming from a paper-jam. However a printer appearing as “ Offline ” error can also be down to problems with your printer driver or software.
How do I fix an HP printer that is offline?
Restart your printer by turning it off, waiting 10 seconds, and disconnecting the power cord from your printer. Then, turn off your computer. Connect the printer power cord to the printer and turn the printer back on. Disconnect the power cord from your wireless router.
How do I print a diagnostic page on my HP printer?
Print a Print Quality Diagnostic Page
- Open or search for the HP folder in your list of installed software programs, click the folder for your printer, and then click the name of your printer.
- Click Print & Scan.
- Click Maintain Your Printer.
- Click the Device Services tab, and then click Print Quality Diagnostics Page.
How do I print a test page on my HP printer without a computer?
Use one of the following methods to print a self-test page.
- Load letter or A4, unused plain white paper into the input tray.
- Press and hold the Cancel ( ) and the Start Copy Color buttons at the same time.
- Release both buttons. The self-test page prints.
What to do when printer keeps on blinking?
What does a blinking power light on a printer mean?
Blinking Power light
The Power light ( ) might blink (flash) or be off. A blinking Power light indicates that the product requires maintenance, or is in an error state.
What does blinking light on HP printer mean?
The Power light blinks fast
The Power light blinks at a steady interval when the printer is processing a print job. If the Power light blinks fast, the ink cartridge door might be open, or the printer might be in an error state.
What does orange light in printer means?
Orange light on a printer
On a printer, an orange light usually indicates a problem related to printing activity. A blinking orange light can mean the printer is trying to print something, but is low on ink, out of paper, or there’s a paper jam.
Why is the yellow light blinking on my HP printer?
One of the Ink Cartridge icons is flashing; the corresponding cartridge is empty. The last block of the corresponding icon flashes if a cartridge is low on ink. See Replace ink cartridgesReplace ink cartridges.
How do I get my HP printer to stop blinking?
Why does my HP printer light keep blinking?
The flashing resume light is the indicator that the paper jam or an empty paper tray. Due to the broken parts of the printer or any internal error, the printer light starts blinking. The device needs to be restarted if the power light and the resume light are blinking simultaneously.
What are the most common printer problems?
10 Common Printer Problems You Can Fix Yourself
- Printer is unresponsive.
- Printer won’t print.
- Bad print quality.
- Uncertain about printer security.
- My printer won’t scan.
- Too many paper jams.
- Prints too slowly.
- Printing is too expensive.
Why is my toner not working printer?
If unsuccessful, your toner cartridge may be defective and you should replace it to see if it fixes the toner streaks. These issues can also be caused by a defective drum unit. If reinstalling/replacing the toner cartridge is unsuccessful, replace the drum unit next.