How do EZ Lube axles work?
THE E-Z LUBE SYSTEM CONSISTS OF AXLE SPINDLES THAT HAVE BEEN SPECIALLY DRILLED AND ASSEMBLED WITH GREASE FITTINGS. WHEN GREASE IS PUMPED INTO THE FITTINGS, IT IS CHANNELED TO THE INNER BEARING, THEN TO THE OUTER BEARING, AND EVENTUALLY BACK OUT THE GREASE CAP HOLE FOR A COMPLETE BEARING REPACK.
What grease do I use on Dexter EZ Lube axles?
Recommended Grease and Grease Gun To Use With Dexter EZ Lube Hubs On Travel Trailer Campers I recommend the LubriMatic LMX Industrial Strength Grease #L11390 for your Dexter axle on your 2021 Vista Cruiser Travel Trailer.
How much grease do you put in Dexter EZ Lube axles?
Proper lubrication is essential to the proper function and reliability of your trailer axle. Bearings should be lubricated every 12 months or 12,000 miles. You should repack your bearing cone by placing a small amount, roughly the size of a half-dollar, of grease into the palm of your hand.
How do you know if you have EZ Lube axles?
If your spindle has a zerk on it then you have an E-Z lube spindle and you will want to use either the Trailer Hub and Drum Assembly # AKHD-545-35-EZ-K if you have drum brakes or the part # AKIHUB-545-35-EZ-K if you don’t have brakes.
How often do you grease Dexter EZ Lube axles?
12,000 miles
Along with bearing adjustment, proper lubrication is essential to the current function and reliability of your trailer axle. Bearings should be lubricated every 12 months or 12,000 miles.
How often should you grease trailer bearings?
every 10,000 to 12,000 miles
Most trailers need greasing every 10,000 to 12,000 miles. A single axle utility trailer may need less frequent greasing than a large K-trailer. On the other hand, boat trailers with small wheels may need more regular greasing. In some cases, they may need greasing every 2,000 miles.
Can you over grease EZ Lube bearings?
Yes they can be over greased. If the wheel bearings were properly packed you should not need to add grease to the EZ-Lube hubs for a couple of thousand miles.
Can you use bearing buddies on EZ Lube axles?
Expert Reply: Yes you can use a Bearing Buddy on your current axle setup but you’ll have to remove the zerk/grease fitting. What you have now is an EZ lube spindle which allows you to push grease through the middle of the spindle but you can install a Bearing Buddy over one of these spindles and it will still work.
Can you put too much grease in a bearing?
Too much grease volume (overgreasing) in a bearing cavity will cause the rotating bearing elements to begin churning the grease, pushing it out of the way, resulting in energy loss and rising temperatures.
Can you put too much grease in a wheel bearing?
Too much grease volume (over greasing) in a bearing cavity will cause the rotating bearing elements to begin roiling the grease, pushing it out of the way, resulting in energy loss and increasing temperatures. This can result in accelerated wear of the rolling elements and then component failure.
How many pumps of grease do I need for trailer wheel bearings?
How to Grease Trailer Wheel Bearings with EZ Lube Grease Cert – YouTube
How do you repack trailer bearings with EZ Lube?
Dexter E-Z Lube System – YouTube
How often do you grease EZ Lube trailer bearings?
How To Lubricate Dexter EZ Lube Axles – YouTube
What is the best lubricant for bearing?
Oil
Oil. Oil is the ideal method of lubrication for rolling element bearings.
Does WD 40 lubricate bearings?
Did you know a spray of WD-40 Specialist White Lithium Grease is a great lithium lubricant for bearings? It reduces friction on bearings and helps keep them protected from rust as well.
Is red and tacky grease good for wheel bearings?
#1 Lucas Red “N” Tacky
Lucas Red “N” Tacky is a well-known, high-performance grease suitable for a range of automotive applications, including use as wheel bearing grease. Its long shelf life, high tackiness, and extreme pressure resistance make it a favorite among enthusiasts.
What type of grease is best for wheel bearings?
Most wheel bearings require an NLGI 2 grade grease, while some sealed hub units require an NLGI 00 grade semi-fluid product. For those cases, the NLGI GC-LB or SAE J2695 consistency requirements do not apply. Each type is unique to the bearing design, and should not be used in the other type of bearing.
Can you put too much grease in a trailer bearing?
Can you put too much grease in a trailer hub?
Expert Reply: You just need to pack the bearings on hub and drum assembly # 8-276-5. There’s no such thing as too much grease for bearings!
Can you over grease trailer bearings?
Is WD-40 a good lubricant for bearings?
Did you know a spray of WD-40 Specialist White Lithium Grease is a great lithium lubricant for bearings? It reduces friction on bearings and helps keep them protected from rust as well. Simply apply by spraying directly onto the area.
What should you not use WD-40 on?
There are many different types of plastic, but there are two kinds that you should avoid using WD-40 on—polycarbonate and clear polystyrene plastic. Polycarbonate is a transparent plastic that is commonly used in greenhouses, and polystyrene is typically used for styrofoam and soft drink lids among other items.
Is WD-40 good for arthritis?
Patients who suffer from arthritis are trying anything to relieve those stiff and aching joints.
When should you not use Moly grease?
Greases containing molybdenum disulfide shouldn’t be used in applications that see excessive amounts of water ingress as the molybdenum disulfide can have a corrosive effect of the metal surfaces, and is not suited for bearings and other components that move at a rapid pace.