How do I clear the error on my Brother HL 2240?

How do I clear the error on my Brother HL 2240?

Without you turning it off it’ll turn on by itself and you should have the printer reset to factory settings.

What does an orange flashing light mean on a Brother printer?

The LED light starts flashing in orange once every 0.5 seconds and the printer enters the Cooling mode.

How do you reset the drum on a 2240 HL?

How to reset the drum counter:

1. Make sure the machine is on, then open the front cover.
2. Press and hold the “Go” button for about 4 seconds or until all the LEDs light up.
3. Release the “Go” button and close the front cover.
4. If the drum light is off, the drum unit is reset.

Is there a reset button on a Brother printer?

Press Menu from the printer control panel. Using the Up or Down Arrow keys, select Initial Setup and then press OK. Using the Up or Down Arrow keys, select Reset and then press OK. Using the Up or Down Arrow keys, select the reset function of your preference and then press OK.

How do I reboot my Brother printer?

Reset Your Brother Machine

1. Press Menu.
2. Press or. to display the [Initial Setup] option, and then press OK.
3. Press or.
4. Press or.
5. Press the option in the table to reset the machine or to exit the process.
6. Press the option in the table to reboot the machine or to exit the process.

How do I reset my Brother printer after changing toner?

How to Manual Reset TN760 Replace Toner Error on Brother DCP …

How do I reset my Brother printer?

How To Reset A Brother Printer – YouTube

Why does my Brother printer keep blinking?

Turn on the printer. If the Status LED lamp continues to flash in red, the printer needs to be service. Press the [Feed] button. If the LED lamp starts to flash in red after pressing the [Feed] button, then DK roll may not have installed into the printer correctly.

What does drum light mean?

The Drum LED flashes if the drum unit is near the end of its life. Use the drum unit until you have a print quality problem, then replace the drum unit with a new one. The Drum LED continues to flash if the drum counter was not reset when you installed a new drum unit.

How do I reset my Brother printer drum?

Reset the Drum Counter

1. Close the front cover.
2. Make sure the machine is turned on.
3. Press. (Settings).
4. Press All Settings. (This step might be skipped in some models.)
5. Choose Machine Info. or Machine Information => Parts Life.
6. Press and hold Drum or Drum Life until the machine’s display message changes.
7. Press Yes.
8. Press.

How do I force a Brother printer to reset?

Unplug all the interface cables before you perform a Factory Reset. Press the Up or Down arrow key to select Initial Setup, and then press OK. Press the Up or Down arrow key to select Reset, and then press OK. Press the Up or Down arrow key to select Factory Reset, and then press OK.

How do I reset my Brother printer manually?

[Settings]>[All Settings]>[Initial Setup]>[Reset]. to display the type of reset functions, and then press the reset function you want to use. The LCD displays [Machine will reboot after resetting. Press [OK] for 2 seconds to confirm.].

Why is my Brother printer suddenly not working?

The most common reason a networked Brother machine may stop printing, is because the connection between the computer and the Brother machine is lost. This can occur as a result of wrong settings or configuration of the printer driver. There are several basic troubleshooting steps you can take to resolve this issue.

Why won’t my Brother printer recognize toner?

If you install a partially used toner cartridge, your Brother machine is unable to recognize toner consumption correctly which will cause this problem. Therefore, when you replace the toner cartridge, please use a brand new toner cartridge, not a partially used toner cartridge from another machine.

How do you solve a toner problem?

The most likely fix for this problem is to take the cartridge out. If it’s empty, replace it with a new cartridge. If it still has toner left inside, install it back in the printer, taking care to insert the cartridge properly. Always turn your printer off before attempting to change a cartridge.

What is the Go button on Brother printer?

If the printer is in Sleep mode, press the Go button to wake the printer up and go to the Ready state. If there is an error, the printer will recover automatically from some errors. If an error is not automatically cleared, press the Go button to clear the error, and then continue to use the printer.

How do I get my Brother printer out of error state?

You can also try to solve your Error State issue by using the Windows troubleshooting tool.

1. Click the Start button.
2. Select Settings.
3. Select Update & Security.
4. Select Troubleshoot.
5. Select Additional Troubleshooters.
6. Select the printer icon.
7. Select “Run the troubleshooter”

How do I clear error messages on my Brother printer?

Fixing A Brother In Error State

1. ➜ Method 1: Check your cables / network.
2. ➜ Method 2: Make sure your printer has ink and paper.
3. ➜ Method 3: Restart your printer.
4. ➜ Method 4: Update printer drivers.
5. ➜ Method 5: Use the Windows troubleshooting tool.
6. ➜ Method 6: Reset your print spooler.

How do I know if my Brother printer needs a new drum?

The Brother machine will display a ‘Replace Drum’ or ‘Drum Stop’ message when the machine has printed approximately 15,000 pages. The drums should be replaced as a set in order to maintain print quality. Unlike the toner cartridges, the drum change is not automatically detected by the machine when they are replaced.

What happens if I don’t replace printer drum?

But the replacement of a drum unit is vital to laser printers’ health. A degraded drum unit can cause streaks, smudges, and blank spots on your printed page even if you just inserted a new printer toner. While a broken drum unit won’t break your printer, it will just fail to stop printing at a certain point.

How do I know if my printer drum needs replacing?

The drum unit may need replacing if you notice the printer producing blurry, low-quality images. Black or colored toner spots on printouts also indicates a failing drum unit. In some cases, horizontal lines may develop across the printout every time the paper passes the failing part of the drum.

What does Brother machine reset do?

Use the Machine Reset function to reset the machine’s settings to the factory settings. The network settings and the security settings will not be reset by the Machine Reset function.

How do I restart my printer?

How to Reset your HP Printer | HP Printers | HPSupport – YouTube

How do I restart my Brother printer?

How do I fix my Brother printer not responding?

If you’re using a USB printer, try simply re-plugging the USB cable. If this fails, you can attempt plugging the USB into a different port on your PC. Brother printers often fail to connect due to a faulty or broken USB port.