How do I configure my GTPL fiber router?

How do I configure my GTPL fiber router?

Connect the GTPL cable to the input jack on the Wi-Fi router. You are required to configure the router as per the specifications of the make and model. Your GTPL user id and password will be have to be saved on the router configuration page.

What is GTPL router IP address?

The IP Reputation for 43.249. 234.105 is rated as low risk and has no abuse issues among our free plan level data sets & blacklists.
…
IP Reputation Lookup – View Risk & Abuse Reports.

How can I change my GTPL router name?

For Wi-Fi Routers

Go to Advanced > System Tools > Administration and complete the settings in Account Management section. Enter the old username and old password. Enter the new username and enter the new password twice (both case-sensitive). Click Save.

Does GTPL provide static IP?

Static IP Cost 150/- per month & 1500/- additional for all above plans if required. Increased Bandwidth/peed is not available for Non-Authentication based Static IP Clients. All Packages of 4 Mbps or above are Subject to Technical Feasibility.

What is default password of Gtpl broadband?

The default username for your ZTE F660 is admin. The default password is admin.

How can I fix my GTPL WIFI?

Reasone : RF cable not connected properly or loose/damaged. Solution : Check RF cable and reinsert RF cable properly. Solution : After all process, facing same issue then call to customer care : Toll free – 1800-419-0419 | Toll No : 9727-633-633 and book complain.

What is the username and password of GTPL router?

The default password is admin. Enter the username & password, hit “Enter” and now you should see the control panel of your router.

How do I change my 192.168 1.1 password?

TP-Link:

1. Login to Router admin panel using its default IP Address – 192.168.0.1 / 192.168.1.1.
2. Enter the default username and password (admin/admin in most cases).
3. Navigate to Wireless > Wireless Security > WPA/WPA2 – Personal (Recommended) > Password .
4. Enter your preferred password and Save the change.

How do I change my 192.168 100.1 password?

Once you have logged in to your router interface at 192.168. 100.1, it is time to change the settings to meet your preference.

1. Go to the general settings menu.
2. Choose the router password or similarly-named option.
3. Enter your desired password.
4. Save the changes.

What is static IP in broadband?

When a device is assigned a static IP address, the address does not change. Most devices use dynamic IP addresses, which are assigned by the network when they connect and change over time.

How do I set a static IP on my GTPL router?

1 Click on Network Connection Icon on the system bar, then click on Open Network and Sharing Center. 2 Click on Change adapter settings. 3 Right click on Local Area Connection, then choose the Properties option. 5 Choose Obtain an IP address automatically and Obtain DNS server address automatically and then click OK.

How can I reset my GTPL WIFI password?

Change Password

1. On the System Administration module, click User Management, and then click Change Password.
2. The Log In Id and User Name (by which you have logged in to the application) appear on the screen.
3. Enter the existing password in Old Password field.
4. Enter New Password in the given field.

Why GTPL WIFI is not working?

How do I fix no Internet connection?

Fix Wi-Fi Connected But No Internet Access Error

1. Restart Device.
2. Check Modem Lights.
3. ISP Is Down.
4. Antivirus or Other Security App.
5. Use Built-in Troubleshooter.
6. Flush DNS.
7. Change Wireless Mode on Router.
8. Obtain IP and DNS Automatically.

How do I fix no WiFi connection?

Try these common fixes first.

1. Restart your router. This fix works so often that it’s always worth trying first.
2. Switch Wi-Fi bands (2.4 GHz and 5 GHz)
3. Test your Wi-Fi on different devices.
4. Try a different Ethernet cable.
5. Improve the position of your device and/or router.

How can I change my Gtpl Fibre broadband password?

To change password:

1. On the System Administration module, click User Management, and then click Change Password.
2. The Log In Id and User Name (by which you have logged in to the application) appear on the screen.
3. Enter the existing password in Old Password field.
4. Enter New Password in the given field.

How do I change my broadband password?

How to change your Wi-Fi password

1. Enter the router’s IP address in your internet browser.
2. Check the bottom, back, or side of the router for the IP address.
3. Log into your router’s configuration page.
4. Look for the “Wireless”, “Wireless Security” or “WLAN” option.
5. Enter the new password in the “Wi-Fi Password” box.

Why is 192.168 1.1 not opening?

Also, Look at the back of Bottom Of Your Router for Default Login credentials & Make Sure 192.168. 1.1 is the default ip for Your Router. Reset the Browser or Remove cache memory of the Browser to Try & check With New Settings. Try a Different Internet Browser if your current One Won’t Work.

How do I find my 192.168 1.1 username and password?

2. The default IP address is 192.168. 1.1, and the default login username and password both are admin (all lower case).

What is the 192.168 1.1 username and password?

The default IP address is 192.168. 1.1, and the default login username and password both are admin (all lower case).

How do I log into my 192.168 1.1 IP address?

192.168. 1.1 — What IP Address Is It?
How to Login 192.168. 1.1?

1. Turn on your router and connect it to your computer with an Ethernet cable.
2. Open your favorite web browser and type “http://192.168.1.1” into the address bar.
3. Enter the correct router login/password combination.

What are the 4 types of IP address?

How an IP Address Works. An IP address allows computers to send and receive data over the internet. Most IP addresses are purely numerical, but as internet usage grows, letters have been added to some addresses. There are four different types of IP addresses: public, private, static, and dynamic.

How do I set my IP address?

Setting the IP address on your PC or mobile computer

1. Click Start >Settings >Control Panel.
2. On the control panel, double-click Network Connections.
3. Right-click Local Area Connection.
4. Click Properties.
5. Select Internet Protocol (TCP/IP), and then click Properties.
6. Select Use the Following IP Address.

How do I get a static IP address?

Contact your Internet Service Provider’s customer service department and ask to purchase a static IP address through them. Give them the MAC address of the device you want to assign the static IP to. It may take a few days for them to assign you with a static IP.

How do I access my Gtpl router?

If you already have username and password then you can setup yourself from http://www.gtpl.net/login/login.php and go to Mac Update and give WAN Mac address. Even I prefer to give both LAN and WAN address just in case if you don’t know which to give. Now GTPL should start working.