How do I reset my Xerox transfer roller?

Locate the Transfer Roller on the inside of the door.
…
Reset the Transfer Roller life count:

Table of Contents

Select [Printer] on the Touch Screen.
Select [Tools].
Select [Setup].
Select [Service Tools].
Select [Reset HFSI Counters].
Select [Tranfer Roller].
Select [Reset Counter]. A confirmation window will be displayed.
Select [Reset].

How do you replace a transfer roller?

Okay let’s start first open the left hand or a press the orange lever in the direction of the arrow to release the transfer roll. And then lift and remove the transfer rule.

How do I reset my second bias transfer roll?

Reset the Life Counter of the Second Bias Transfer Roller:

Log in as the System Administrator or Key Operator.
Press Machine Status at the Control Panel.
Select the Tools tab.
Select Troubleshooting.
Select Resets.
Select Supply Counter Reset.
Select Second Bias Transfer Roller.
Select Reset Counter.

How do I factory reset my Xerox altalink c8055?

Restart the Printer From the Control Panel:

Login as System Administrator at the Control Panel.
At the control panel touch screen, touch Device, then touch Tools.
Touch Troubleshooting.
Touch Resets.
Touch Software Resets.
For Reset Options, select the type of reset that you want.

How do you replace second bias on roller Xerox?

Replace the Second Bias Transfer Roll

Remove any paper from the tray on the left side of the printer, then fold up the tray.
Open the Bypass Tray (Tray 5).
Lift up the release lever and open Cover A.
Remove the new second bias transfer roll from the packaging.

How do I remove HP transfer roller?

Insert the transfer-roller removal hook around the left end of the metal shaft near the blue gear (callout 1). Lift the hook up (callout 2) to disengage the left side of the transfer roller. Slide the transfer roller to the left, and then lift up to remove it.

How do you reset a transfer belt counter?

Reset the Transfer Belt Life / Counter

Login as the Administrator at the Control Panel. See the Related Content for Additional Information.
Select the Machine Status button.
Select the Tools tab.
Select Troubleshooting.
Select Resets.
Select Supply Counter Reset.
Select Transfer Belt.
Select Reset Counter.

How do you change Xerox transfer belt cleaner?

Replace Xerox Workcentre transfer belt cleaner 7425, 7428 – YouTube

What is the 12 digit reset code Xerox?

The Welcome Center generates a 12 digit Feature Key number. Press the Machine Status button, then Tools tab. Select the General feature, then Feature Installation. Enter the Feature Key on the Feature Key screen to reset the Administrator credentials to the default values ( admin and 1111).

How do I reset my Xerox machine?

Reset the Printer Settings to Factory Defaults

At the printer control panel, log in as administrator, then press the Home button.
Touch Device > Resets > Reset to Factory Defaults.
At the prompt, touch Reset.
When the process is complete, the printer restarts automatically.

Can you clean a printer transfer roller?

How to clean a Printer Transfer Roller – YouTube

Where is the transfer roller?

The transfer roll sits beyond the drum and before the fuser. As paper moves through your laser printer, it passes through each component to complete the printing process. The drum receives the image/text elements from your computer and adds in toner, and the paper is then sent to the transfer roll.

How do I change my second bias transfer roll?

Replace Xerox Workcentre second bias transfer roller 7425 – YouTube

How do you replace a transfer belt?

Replacing the transfer belt

Turn off the printer.
Open door C.
Using the screwdriver stored inside door A, remove the door stopper.
Loosen the screws that secure the transfer belt.
Remove the paper guide.
Remove the transfer belt.
Unpack the new transfer belt.
Insert the new transfer belt until it clicks into place.

How long is Xerox lockout?

When the number of login attempts exceeds set limits of the device it locks the account. The default lockout period for Altalink devices is 30 minutes.

How do I reset my Xerox printer?

What does software reset do on Xerox?

IMPORTANT: Using Software Resets to restart the printer is faster and wastes fewer consumables than powering the printer off and on. A software reset may be performed from the Control Panel of the device itself or using the remote control panel in CentreWare Internet Services (CWIS).

Can I clean transfer roller with alcohol?

Do not use water or any alcohol-based solvent. Clean the paper transfer roller until there is no visible dirt or dust on the roller. While cleaning, be careful of the discharge needles on the guide plate at the paper transfer exit.

How do you rejuvenate rubber rollers?

Tech Support: How to restore rubber pickup rollers – YouTube

How do you clean transfer rollers?

What does transfer roller do?

A printer transfer roll is a component in your office’s laser printers that transfers images onto paper. The component also collects any excess toner and routes it to a waste reservoir so the ink doesn’t collect inside of your printer.

What is a printer transfer belt?

What Is A Transfer Belt? It is a rotating belt that is typically large which carries the mixture of different colors of toner particles. Color laser printers use the CMYK color combination. This means a color laser-class printer will typically have 4 toner cartridges.

How do I unlock my Xerox printer?

At the control panel, press Machine Status, then touch the Tools tab. Touch Authentication / Security Settings > System Administrator Settings > System Administrators Login ID. To lock the printer, touch On. To unlock the printer, touch Off.

How do I reboot my Xerox?

Restart (Reboot) the Printer

Login as System Administrator at the Control Panel.
At the printer control panel, press the Machine Status button, then touch the Tools tab.
Touch Troubleshooting.
Touch Resets.
Touch Software Resets.
For Reset Options, select the type of reset that you want.
Touch Reset.

How do I reset my Xerox transfer roller?