How do I set my first boot device?

How do I set my first boot device?

Configuring the boot order

1. Turn on or restart the computer.
2. While the display is blank, press the f10 key to enter the BIOS settings menu.
3. After opening the BIOS, go to the boot settings.
4. Follow the on-screen instructions to change the boot order.

How do I enable the DVD drive in BIOS?

On the Startup Menu screen, press f10 to access the BIOS Setup Utility, and then use the arrow keys to navigate to the Storage screen. Use the arrow keys to select Device Configuration, then press enter. Look for a CD/DVD drive entry in the Device Configuration subscreen. Press the esc key to exit Device Configuration.

How do I boot directly from a CD?

About This Article

1. Insert the CD.
2. Click the Start menu.
3. Click the Power icon.
4. Click Restart.
5. Press either the Del or F2 key when the PC restarts.
6. Go to the BIOS Boot tab.
7. Set your CDROM drive as the primary boot drive.
8. Save and reboot.

How do I get my laptop to boot from CD?

Turn on the computer and immediately press the Escape key repeatedly, about once every second, until the Startup Menu opens. Press F9 to open the Boot Device Options menu. Use the up or down arrow key to select the CD/DVD drive, and then press Enter. The computer starts Windows.

What is 1st boot device?

In the early days of personal computers, the floppy disk was set as the first boot device and the hard disk second. Subsequently, the CD-ROM was chosen to be the first.

What is boot device priority?

The boot order is a priority list. For example, if USB drive is above hard drive in your boot order, the computer will try the USB drive, and if it is not connected or no operating system is present, boot from the hard drive.

How do I get Windows 10 to recognize my DVD drive?

How to fix DVD drive missing in Windows 10?

1. Make sure your DVD drive is correctly connected.
2. Updates Windows 10 to the newest version.
3. Reinstall the DVD drive.
4. Remove IDE/ATAPI drivers.
5. Fix corrupted registry entries.
6. Create a registry subkey.
7. Backup your system in case DVD drive missing again.

Why computer is not booting from CD?

The most common cause of this error is that the BIOS is not configured correctly. You need to set the CD/DVD drive as the first priority. Press the required key during startup to enter BIOS. The key could be F2, F10, F12, etc.

What makes a CD bootable?

In order for a CD to be bootable, it must contain two files: BOOTCAT. BIN and BOOTIMG. BIN. BOOTCAT.

How do I select a boot device?

From within Windows, press and hold the Shift key and click the “Restart” option in the Start menu or on the sign-in screen. Your PC will restart into the boot options menu. Select the “Use a device” option on this screen and you can choose a device you want to boot from, such as a USB drive, DVD, or network boot.

What is the default boot sequence?

What is the default boot order? The default boot order settings for the computer are configured in the factory. The default boot order determines what the computer boots to first.

What should be my boot priority order?

To give a USB device boot sequence priority over the hard drive, do the following: Move the hard drive device to the top of the boot sequence list. Expand the hard drive device to display all hard drives. Move the USB device to the top of the list of hard drives.

What is default boot order?

How do I get boot device priority?

About Boot Priority

1. Start the computer and press ESC, F1, F2, F8, F10 or Del during the initial startup screen.
2. Choose to enter BIOS setup.
3. Use the arrow keys to select the BOOT tab.
4. To give a CD or DVD drive boot sequence priority over the hard drive, move it to the first position in the list.

Why is my CD DVD drive not showing in my computer?

Reinstall or Update Driver in Device Manager

Expand DVD/CD-ROM drives, right-click the optical drive listed, then click Uninstall. Exit Device Manager then restart your computer. Windows 10 will detect the drive then reinstall it. You can also use the option to Update Driver Software from within Device Manager.

Why DVD is not detected?

Update or reinstall the driver for the optical drive. Uninstall and reinstall the Dell provided playback software (DVD or Blu-ray movie playback issues) Perform a Windows System Restore. Restore your computer to factory defaults.

Where do you correctly set the boot sequence?

How to configure the boot sequence in the system BIOS or CMOS.

1. Power on the system and look for an on-screen message indicating which function key to press to enter Setup.
2. Immediately press the indicated key to enter Setup.
3. Upon entering Setup, look for title headings such as Boot Order or Boot Sequence.

What is legacy boot mode?

Legacy Boot refers to the boot process used by the BIOS firmware to initialize hardware devices. The Legacy boot contains a selection of installed devices that get initialized as the computer performs the POST test during the boot process.

How do I know if my CD is bootable?

How to check if USB, DVD is bootable on Windows PC – YouTube

How do I make a bootable Windows 10 DVD?

Step 1: Insert a blank DVD into the optical drive (CD/DVD drive) of your PC. Step 2: Open File Explorer (Windows Explorer) and navigate to the folder where Windows 10 ISO image file is located. Step 3: Right-click on the ISO file and then click Burn disc image option.

How do I set my BIOS to boot from DVD Windows 10?

Steps are provided below:

1. Boot mode should be selected as UEFI (Not Legacy).
2. Secure Boot set to Off.
3. Go to the ‘Boot’ tab in the BIOS and select Add Boot option. (
4. A new window will appear with ‘blank’ boot option name. (
5. Name it “CD/DVD/CD-RW Drive”
6. Press F10 key to save settings and restart.
7. The computer will restart.

How do I choose which drive to boot from?

Restart your computer and you may see a screen that says, “Press F12 Boot for boot Menu” or “Press Del for Setup”. Once you have entered the boot menu, you can use the up and down arrows to select the device you want to boot from.

How do I set boot priority in Windows 10?

Step 1: Type msconfig in the Start/taskbar search field and then press the Enter key to open the System Configuration dialog. Step 2: Switch to the Boot tab. Select the operating system that you want to set as the default and then click Set as default button. Click the Apply button.

What is first boot priority?

The first device in the order list has the first boot priority. For example, to boot from a CD-ROM drive instead of a hard drive, place the CD-ROM drive ahead of it in the priority list.

How do I make my DVD drive visible in Windows 10?

Have you attempted to show the hidden device in Windows 10? At times, Windows 10 update will do a reset, and restore some settings to an earlier state. As soon as your disc is not showing up as normal, try at first to unhide CD/DVD device. Navigate to This PC -> Manage -> Device Manager -> View -> Show hidden devices.