How do you use a fire extinguisher pass?
It’s easy to remember how to use a fire extinguisher if you can remember the acronym PASS, which stands for Pull, Aim, Squeeze, and Sweep. Pull the pin. This will allow you to discharge the extinguisher.
What are the 4 steps in using a fire extinguisher pass?
- PULL… Pull the pin. This will also break the tamper seal.
- AIM… Aim low, pointing the extinguisher nozzle (or its horn or hose) at the base of the fire.
- SQUEEZE… Squeeze the handle to release the extinguishing agent.
- SWEEP… Sweep from side to side at the base of the fire until it appears to be out.
Do you remove zip tie from fire extinguisher?
You are supposed to leave the ties in place. You will not find a fire extinguisher that is serviced regularly by a company without these.
What are the 3 P’s of fire safety?
Follow the three P’s: prevent, plan and practice. Make sure your home has working smoke alarms, your family has a fire escape plan, and you have practiced it.
What are the 5 types of fire extinguishers and their uses?
Which fire extinguisher types to use
- Class A fire extinguisher – water, water mist, foam, dry powder, wet chemical.
- Class B fire extinguisher – water mist, foam, dry powder, CO2, some wet chemical.
- Class C fire extinguisher – water mist, dry powder.
- Class D fire extinguisher – specialist dry powder.
Do you take the plastic off fire extinguisher?
Keep the handles depressed until nothing more comes out of the extinguisher. Carefully remove the plastic bag from the end of the extinguisher hose, close / seal bag and place in the trash. Place the fire extinguisher in a cool, dry place and check the pressure gauge periodically.
Do you take the White tag off fire extinguisher?
@Monso: if you are using this extinguisher at home, then it is Ok to remove an inspection tag. If this extinguisher is not in a home, I would leave the tag.
What are 5 fire safety rules?
10 measures to assess fire safety
- Provide adequate means of escape.
- Outline clear pathways to exit doors.
- Install smoke detection systems.
- Maintain smoke suppression systems.
- Conduct regular fire drills.
- Use flame-retardant materials in interiors.
- Make your office accessible to firefighters.
- Keep the building plans handy.
What are the 3 A’s of fire fighting?
Activate, Assist and Attempt
6) To remember the rules of fighting fires, just remember the three A’s: Activate, Assist and Attempt. 7) The four simple steps for operating a fire extinguisher can be remembered with the word PASS. Pull, Activate, Squeeze, Sweep.
What is ABC in fire extinguisher?
“ABC” indicating that they are designed to extinguish class A, B, and C fires. “BC” indicating that they are designed to extinguish class B and C fires.
What is the colour code for fire extinguishers?
Water fire extinguishers are colour coded red. Foam fire extinguishers are colour coded in cream. Powder fire extinguishers are colour coded with blue. Carbon dioxide fire extinguishers are colour coded with black.
Do you leave the zip tie on a fire extinguisher?
Do you remove white tag from fire extinguisher?
Each state has different requirements regarding what the status tag should list. All recorded information is essential for maintaining the efficacy of your fire extinguisher — never remove or mark on the tag unless authorized to do so.
Do you cut the zip tie on a fire extinguisher?
NO! Using a zip or twist tie can result in wasted time to untwist and remove the tie and could spell the difference between being able to extinguish a fire in its infancy stage versus allowing it to grow in size and be unable to extinguish with the fire extinguisher.
Do you remove the yellow tag from fire extinguisher?
Similar to buying clothes, you might have an urge to remove the tag once you’ve brought the Fire Extinguisher home. That’s where it’s different, YOU DON’T. That’s right, DO NOT REMOVE THE YELLOW TAG!
What is the first rule of fire?
Provide adequate means of escape
The first rule of fire management requires sufficient escape routes out of the building, in accordance with its scale and occupancy.
What are the 2 golden rules to remember when fighting a fire?
In the event of a fire or other emergency, remember four golden rules:
What are the 4 types of fire?
Classes of fire
- Class A – fires involving solid materials such as wood, paper or textiles.
- Class B – fires involving flammable liquids such as petrol, diesel or oils.
- Class C – fires involving gases.
- Class D – fires involving metals.
- Class E – fires involving live electrical apparatus. (
What are the 4 types of fire extinguishers?
There are 5 main fire extinguisher types – Water, Foam, Dry Powder, CO2 and Wet Chemical.
Why is the fire extinguisher pin sealed?
Why is the fire extinguisher pin sealed? The seal is a proof that the fire extinguisher has not been tampered with or used since the last inspection or service. Also, it keeps the safety pin from getting loose or accidentally falling out.
Should I cut the zip tie on my fire extinguisher?
It is fairly easy to break when deliberately pulling the pin out, what you would be doing in an emergency. As a used extinguisher must be recharged or replaced, even if only partially used, it is best to leave the safety cord holding the pin in.
What are the 5 basic fire safety practice?
What is the number one rule in a fire?
When it comes to fire safety, the number one rule is that everyone goes home. Ensuring this starts the moment you drive up on scene with a good scene size up. Assessing the structure, looking for hazards, and calculating the best means of fire attack are some of the first steps to ensuring scene and firefighter safety.
Which gas is in fire extinguisher?
Carbon dioxide
Carbon dioxide (CO2) is stored in extinguishers in the liquid phase. It vaporizes when released thereby smothering a fire by excluding the air (oxygen) needed for combustion.
Do you leave the tag on fire extinguisher?
As a used extinguisher must be recharged or replaced, even if only partially used, it is best to leave the safety cord holding the pin in.