How do you use a Napoleon gas fireplace?
Position check to make sure that the pilot knob is also in the off. Position as indicated by the marker on the gas valve push the pilot knob in and turn it counterclockwise to the pilot.
How do you clean a Napoleon gas fireplace?
Apply a small amount of cleaner to a soft dry cloth wipe. The glass in a circular motion.
How do you install a Napoleon fireplace insert?
And then you’re going to level this off and then here you’re going to screw this bracket into two studs that you can find and then on these two Clips there’s two openings on the back of the fireplace.
Are Napoleon Gas Inserts good quality?
Napoleon Gas Fireplaces are high-quality products. Whether you choose the Direct Vent models or a Vent Free Model, you are going to get a good unit but is it right for your home?
How do you turn the heat on a Napoleon fireplace?
The main power switch and control panel are located on the top front of the appliance as illustrated. turn on the heater, push the heater button .
How do you turn on a gas fireplace manually?
Igniting with a Fireplace Key
- Look over the user manual included with your fireplace.
- Remove your fireplace’s outer cover.
- Put a fireplace key into the device’s gas valve knob.
- Hold a long lighter up to the burner and ignite it.
- Turn the gas key.
- Replace the fireplace’s outer cover immediately.
How often should you clean a gas fireplace?
Even though gas fireplaces do not burn wood or make smoke, cleaning a gas fireplace monthly is essential, even when it is not being used. Regular cleaning will prevent dust and dirt from harming mechanisms and allow you to inspect the system for damage.
Does my gas fireplace need to be cleaned?
While gas fireplaces don’t produce creosote, they do still need annual cleaning. Both propane and natural gas are clean burning gas fuels, so they don’t produce the same byproducts as wood, but they can still produce buildup that needs to be cleaned away.
How do you install a gas fireplace insert?
How to Install a Gas Fireplace Insert | This Old House – YouTube
How do you remove the front screen of a fake fireplace?
BurnBrite 88001 How to Remove the Front Glass Panel – YouTube
Who makes Napoleon Fireplaces?
Wolf Steel Ltd.
Wolf Steel Ltd., better known as Napoleon, is the largest privately-owned manufacturer of fireplaces, grills, and gas furnaces in North America. Based in Barrie, Ontario, Napoleon began in 1976 as a steel fabrication business under the name Wolf Steel Ltd.
How hot does an electric fireplace get?
4,600 BTUs
HOW MUCH HEAT DOES AN ELECTRIC FIREPLACE GIVE OFF? Electric fireplaces typically give off 4,600 BTUs of heat. However, some models can be wired to 220/240 volts and will have a heat output of up to 8,900 BTUs. And infrared fireplaces produce approximately 5,200 BTUs of heat.
How do I turn on my fireplace heater?
How to Operate Your Fireplace Insert – YouTube
Should the pilot light always be on in a gas fireplace?
We recommend that you turn off your gas fireplace pilot light seasonally. Turning off your gas fireplace’s pilot light can save a substantial amount of energy and money. It is important to remember that not all gas fireplaces have “standing” pilot light, or, a pilot light that is “always on”.
Can I turn on my gas fireplace without power?
Most gas fireplaces can run without electricity. Gas fireplaces that have a standing or vertical pilot light can light with or without electricity. If your gas fireplace has a different type of ignition system, you will not be able to run it without electricity unless it has a backup battery.
Is it OK to leave pilot light on gas fireplace overnight?
It’s not safe to leave it on. Why Isn’t It Safe? The biggest reason is that gas fireplaces can release deadly carbon monoxide gas, which is odourless and can go unnoticed until a person dies from carbon monoxide poisoning. It is best to not leave your fireplace on for more than three hours at a time.
What does it cost to have a gas fireplace cleaned?
Most of the cleaning for a gas fireplace can be done on your own when the fireplace is cool and the pilot light is off. However, because of the vent, you will need an annual inspection which costs around $75-$100. If you want a thorough cleaning at the same time the cost could be closer to $150-$175.
What is the lifespan of a gas fireplace?
ten to fifteen years
How Long Can a Gas Fireplace Last? Generally speaking, you can get a good ten to fifteen years of use before you need to replace your gas fireplace.
What is the difference between a gas fireplace and a gas insert?
Gas fireplaces are very similar to gas inserts. They are made the same way, with the box-within-a-box setup. However, the difference between gas fireplaces vs. gas inserts is that a built-in gas fireplace doesn’t require an existing fireplace or chimney.
Can I install a gas fireplace myself?
To make this upgrade to your existing fireplace, you can install a gas fireplace insert. Since this process requires working with vent pipes, electrical, and the gas supply, we recommend working with a professional instead of doing it yourself.
How do you remove a mesh fireplace screen?
How to Remove fireplace mesh curtain[DIY fireplace – YouTube
How do you clean a mesh fireplace screen?
In order to clean a dirty fireplace screen, you should:
- Remove the fireplace curtain from its track.
- Lay the fireplace curtain on a drop cloth outside.
- Rinse the fireplace curtain with a hose.
- Apply dish soap or gentle cleaner to the curtain.
- Scrub the mesh curtain with a gentle scrub brush.
- Rinse away the soapy water.
How do you reset a Napoleon fireplace?
Troubleshooting a Napoleon Fireplace Remote Control – YouTube
Where is Napoleon made?
Napoleon. Napoleon is probably the most well known of all of our Canadian-made brands and products. Their manufacturing plant is only an hour or so north of our Etobicoke store. Not only do they make their barbecues in Barrie, Ontario, they also have a second plant where they manufacturer the stainless steel as well.
Do electric fireplaces use a lot of electricity?
Do Electric Fireplaces Use a Lot of Electricity? Electric fireplaces use approximately the same amount of electricity as the average space heater. Since most fireplaces operate on a standard household outlet, they use 120 volts to power the internal heater and draw about 1,500 watts at 12.5 amps.